Alright! final thoughts I pulled 93.7gs I think I could have pulled more. Ill do a couple things different next time, better soil, maybe coco and better feeding schedule! I think I couldve fed her more with no problems! super strong strain! 100x100 recomended and ill definetly will get a higher tent and a better light for sure!0

Been away couple of days Day 74 Came back and the lady’s exploded. Dropped down the nutrients since day 60 and started flushing on day 68. I’m waiting for the plants to get brown trichomes. But all in all I’m happy if I don’t fuck it up somehow Day 77 Flushed yesterday the last time. Ppm was 400. Will chop them on day 84, if nothing special happens this is the last Post until before chopping them. THANK YOU ALL FOR YOUR TIPpS AND YOUR OPINION YOU GUYS ARE GREAT!!!! Happy Growing to everyone !

Average yield and high quality bud. Fingers are full of hash and she’s a stinky dense plant!

What a difference a week can make! This week, the plants have been improving day after day. At the end of Week 6 and going into this one, I continued feeding with: -Biobizz Bio-Grow (1ml/L) -Root-Juice (2ml/L) -Bio-Heaven (2ml/L) -Alg-A-Mic (2ml/L) They’ve definitely started to perk back up and are growing much better again. I’ve also been doing LST every day, just minor adjustments to keep the canopy nice and flat. The branches bounce back quickly and orient themselves toward the light with no issue. Speaking of the light — I realized it had been too close for a while (only around 30 cm…), and I was seeing signs of light stress and tip burns. So I raised the Spider Farmer SF2000 EVO to 50 cm and kept it at 80% power, which gives me around 510 PPFD according to the Photone app. Since that change, the leaves have returned to a healthy green and overall posture has improved even more. Big thanks to all the growers who helped out — your tips have been super helpful and honestly saved this grow. I’ll keep things stable now, as the plants finally seem to be back on the right track!

The strain is a easily maintained but yet very durable plant to grow from nutrient deficiency, climate to even pests. A recommended strain if you are looking for a nice smooth smoke that's a hard hitter and a lasting effect

Trichome immer noch nicht bernsteinfarben. Heute am 78. Tag einen Großteil der Blätter entfernt.Spüle weiter mit Wasser ...Diese Woche nochmals gutes warmes Sonnenwetter.

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

Facing some nut block problems. Now I think it's already solved let's see

Buds getting Thicker, so far no real problems i think. RG #2 has the biggest and thiccest buds until now, hope the others will follow. Colors of pistils do change, they look pretty frosty and smell a lot now. Like the last weeks i still just feed Bio PK 5-8 10ml for each Plant and did removed a few leaves which were blocking light but not much. Guess i will stop with removing more leaves now. Pretty hard to estimate what kind of yield i will get at the end, but i hope it will get as close as possible to 1g/Watt (but i doubt it :D ). Around 4 Weeks left until my first harvest. See you next week!

The growth went as planned, not too bushy and not mich stretch and fast flower

3 Days after lollipopping we saw that both runtz are hermaphrodite maybe too much stress but genetics seem to be bad… Now on we check them daily to see if there are any „eggs“ and remove them asap Unfortunately, the brucebanner 3 had a magnesium and calcium deficiency caused by a nutrient blockage. We Head an incorrect PH test. When we checked with another pH test, we found that the pH value was clearly too high at7.5+. Hopefully there will still be something with the harvest… We ordered some calmag and got some ph down by a friend…

Hey agaaain! Let me start this week by saying wooooow, this was a crazy week and not because I made a mistake but rather because I had to do a lot of things to avoid unnecessary stress. Now allow me to elaborate why I tried to avoid unnecessary stress: I had to move out because the landlord where I lived sold the house (this is the main reason why I couldn't update the journals earlier 😛) and gladly I had friends who already owned an empty grow tent (4x4, I loved the size! 😍) and they allowed me to use it and bring my plants and my lights there for some days. I knew this whole experience would be stressful for my babies, but I had to do it anyway (and I'm glad I wasn't in the middle of flowering 😨). The first visit: Moving them to my friend's house was a non-issue! 👌 I fed the plants at their place (with some extra water and slightly more fertilizers) and everything was great! 😊 The second visit: After two days I visited my babies and the humidity was close to the 85%. That scared me but they also grew a lot during those days which I think was... cool? I installed a new extractor in the tent and used it to get more fresh air inside and obviously that fixed all the humidity issues I had! The plants looked great! 😍 The last visit: After some days I went to their house again and yiiiikes! Here is when the issues began! I couldn't visit earlier (thanks to the move) and the plants were super thirsty! Specially Boomer. I took them to my new house and when they were inside their tent I fed them some pHed water and then I allowed the plants to rest for some extra hours! 😱 Originally I wanted to go into flower after this week but clearly I couldn't start it immediately since the plants were clearly stressed! So I allowed them to rest for a little more! Anyway, the last photos show how the plants look after I allowed them to rest for some extra hours and after feeding them some water. Boomer will still need some more extra time to heal! Thanks everyone for reading! More updates soon! 👊

Que pasa familia, vamos con la quinta semana de floración de estas GG4 autofloreciente de MSNL. Vamos al lío, lo primero comentar, que me dieron gato por liebre, porque esto tiene pinta de rudelaris que tira pa atrás… ya están como quien dice empezando a madurar El ph se controla en 6.0 , la temperatura la tenemos entre 25/21 grados y la humedad ronda el 50%. El ciclo de floración puse 12 horas de luz, el foco está al 100% de potencia. De momento van creciendo a buen ritmo y tienen un buen color, ya empiezan a hinchar y a madurar, estaban bien enraizadas al realizarle el trasplante se notaba la abundancia radicular. Agradecer a todo el equipo de Agrobeta por el envío del kit gold series para esta temporada, soys unos jefes 🙏. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨

hay que mencionar que las raíces están muy grandes y fuertes, crearon un sistema radicular muy denso, parecen ramas, los troncos están muy grandes y fuertes, ya empiezan a notarse más y más las flores

02/19 start of new week. 02/20 got 7 gallons of water 02/21 harvested a branch off each at 45 days flower 01/23 watered with 10.5 gallons 3.5 gallons of goodies

Absolutely loven this F1 Series Killer my friends top shelf Until Next Time HAPPY GROWING

Checked the two unsexed bagseeds again this week. I was correct, I had one male and one female. I have moved all the younger flowering females into the larger 4x2 tent and moved the male plant and the older purple trainwreck plant into the smaller 3x2 tent. I am hoping to isolate the male and minimize pollination of my girls. This is an end grow, I want both bud and seeds. My plan now is to minimize pollination through isolation and pruning. I want to pollinate a single branch on each of the females, this way I only have a few seeds from each plant and still have quality bud. The male has been trimmed back some already and the pollen sacs have not burst yet. The older purple trainwreck plant is adding weight now to the buds and should be done in approximately 2-3 weeks depending on trichomes. In the larger tent, the back left corner is Pineapple Express. It is the tallest plant in the tent. The front left plant is white widow. The middle front plant is also white widow. The middle back plant is a bagseed, I suspect berry white still for this plant. The far right plant is the younger purple trainwreck plant. Currently feeding the younger plants every 5 days or every third watering depending on the plant. The older flowering PT plant will get its last feeding this week and will start a flush after that. Happy growing 👩‍🌾🏼

Wow she doubled her height this week. Grew 9cm! Got loads bushier too. She was repotted too into her 10 litre fabric pot forever home.