This is it. Im gonna tell you soon how much I’ve harvested.

Apliquei poda top em 12 esperando ve resultado (pois nunca tinha feito poda antes da aquele medo )para podar as 8 maiores

Hey now, hope everyone is staying safe and having a great week. The Glueberry OG started to stretch here in the past couple days and picked up 5 inches in the last 5 days, so we will see how long she continues to stretch. I will continue to feed her veg nutrients and and keep the medic grow spectrum x light in V1 mode as to help promote tighter internodal spacing. Once the stretch has stopped or at least almost stopped I will transition her to flower nutrients and introduce her to the flower spectrum of the light. I have started introducing UV/IR lighting to the grow tent for one hour before lights off. I just focused mainly on keeping the feeding reservoir clean, and PH'd, as well as some low stress training for her to attempt to have a nice even canopy. I am definitely more interested in flower quality than quantity at this point. I believe this lady will stretch for at least another week if not slightly longer just based on her expected harvest time of 12-13 weeks but we will see. Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled

Tropicanna Banana Week 13 11L Pot LED: SP250 (245W) for Flow. Stage Canna COCO Mineral Nutrients: 👇 Sensi Cal-Mag Xtra: 1 ml/L Power House Part A: 1.5 ml/L Calcium Plus Part B: 1.5 ml/L Stimulus: 1.5 ml/L Bud Explosion: 1.5 ml//L

Día 71 (30/12) Christmas holidays. Only watering Día 72 (31/12) He recibido mi nueva lampara Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp Procedo a instalarla, de modo que tengo la tienda de 120x60 cm perfectamente cubierta con las DOS (2) lámparas FC1500 EVO Es ideal tener dos lámparas, porque así puedo ajustar la distancia a la lampara en función de la altura de capa planta Ajusto ambas lámparas al 75% de potencia (Total 225W), que es más que suficiente para cubrir el área de 120x60 cm Día 73 (01/01) CBD Auto 20:1 #1 - Muestra una ligera deficiencia con algunas puntas de las hojas dobladas hacia arriba y clorosis... Creo que le voy a dar otra ración de BIO PK 5-8 OG Kush Auto - Está apilando cogollos de forma brutal. Increíble el olor y la cantidad de tricomas que está formando 😍 Día 74 (02/01) CBD Auto 20:1 #1 - Se empiezan a formar tricomas entre los incipientes cogollos OG Kush Auto - Una pena que se haya intensificado la deficiencia de CalMag en las hojas, porque los cogollos son gordos y densos, y cubiertos de tricomas Día 75 (03/01) CBD Auto 20:1 #1 - Voy a darle un boost para las 4 semanas que le quedan hasta la cosecha con SILICIUM FLASH Hago un pequeño agujero cerca del tallo, espolvoreo 25g de SILICIUM FLASH en el agujero, lo cubro de tierra. Riego con una solución de 2g de BACTREX por litro de agua. OG Kush Auto - Impresionante densidad de los cogollos que empieza a doblar las ramas 😍 La ventana de cosecha se acerca! 💥 Día 76 (04/01) CBD Auto 20:1 #1 - Investigando me doy cuenta de que lo que le pasa es quemadura de luz, ya que la parte externa de la planta sufre clorosis, y la parte interna (donde no alcanza la luz) está completamente verde Ajusto la lampara sobre esta planta para 40 DLI OG Kush Auto - Sigue poniendo los cogollos duros como rocas y muy llenos de tricomas! 😍💥 Día 77 (05/01) CBD Auto 20:1 #1 - On going OG Kush Auto - Empieza la senescencia en las hojas de abanico, acelerada por la deficiencia de CalMag que ha tenido. 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/ With 2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp

Week 10 6/9-15 Lemon ladies love the outside. Both are showing yellowing leaves so everyone is getting nutrients with feedings. 6/13 heavy defoliation and limb removal for lemon cake since she's now in flower. Repositioned the scrog after defoliation so the thicker limbs are in the mesh. Drizzle, got light defoliation mostly yellowing fans. Before and after pics and vids. I saw a Japanese beetle on my Lemon Cake and some small holes in the leaves so I added 1/2 tsp neem to the feed solution 6/12. Also started using fish & kelp. I'm still watering 1 gal per plant when I feed. With the heat and humidity, I water daily.

week four flower everything looks fine so far :D I water them with 1.5l every 48h the light I use was set to 100% and it hangs 80cm away from the tops

Start of the thrid week today. I was behind on my dairy the first two weeks so there may some date differences in weeks 1+2 Gorrila zkittlez - doing great so far getting nice and bushy. Doing LST on the three off the every 3rd day and that's about it. Psychosis - she has still been growing and new stems appear evey few days. Two of the leaves had yellowing in them for 2 week so I've put in down to the lack of cal/mag in the system. Today I was going to replace the nutrient water but instead I decided to leave it and and cal/mag to the res. The reason for not changing water is down to the volume I am using. I have a 225L tank, 6 20L pots with a 20L brain unit. So I'm roughly using 300/310L if I'm at full capacity (365-15%) due to me obv not using the full capacity of the red or bucket for many reasons. I only need 50/100 litres at this stage per week so instead of changing it every 7/10 days. I have filled the system with more than enough supply as to not need to change it so frequently. Ps. The nuits/ec/ph have been holding steady for weeks now hence another reason for keep the water res from week 1 I will be changing the nuit strength and water at some point soon of course... Maybe give it another 7 day depending on how the plants are doing 🤙👍

Finally got myself a dehumidifier, now i can controll the humidity in my room because it often went above 60% 🤷‍♂️🏻 Also love how the big northern light is really packing some weight! & the buds on the bottom look as good as the ones more on top!! Can’t wait till i can harvest all of em😁

Everything is going great :-) You can see every day how they continue to explode :-) Although we are still at the beginning of the vegi phase, the roots grow out on the first drain hose. I carefully pushed it back up into the system :-) As fast as it all goes, I think I'll switch to bloom next week. I wish you all a nice grow 😎

Welcome back boys, Everything's going as planned :) Still don't know if I should defoliate, I chose to let the leaves grow a bit more until next week. I will use wood sticks to maintain them a little more spaced. See you next week buddies

Day 5 since time change to 12/12. Hey everyone ☺️. Finally the time has come :-) The lady moved into the flower tent on January 6th, 2021 😁. The day before, of course, a cutting was taken 👍. In the flowering tent, the distance between the plant and the lamp is 40 cm so that she can get used to the strength of the lamp. After 3-5 days I go down to 30 cm. This week it was watered twice with 1 l per plant. GHSC enhancers were added to one wash :-). Flower fertilizer will only be added in 12-16 days as soon as the first blossoms are there :-). Otherwise the tent was completely cleaned and the humidifier refilled. For the next few days I have filled fresh osmosis water in canisters again :-). Next week I will remove the bottom shoots so that the energy doesn't end up going into small popcorn buds 😉. There is nothing more to report this week and I wish you all a lot of fun with the update 😀. Stay healthy and let it grow 🙏🏻🍀 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

I received the clones from An out of province breeder. It reached me after three days of driving on the road with no light. Their future was not certain. I didn’t think I would need that many fans for the clones because they are so tiny, I figured they didn’t need that much maintenance. I was 100% wrong when I’m working with this many plants. I ended up getting mild mildew on top of the soil on the first week because there was barely any air circulation. At this point I didn’t have any Ventilation put up yet. And one fan on the floor. I ended up installing three fans in one room. No issues

Here our Gush Mintz are starting to give their best. In this diary you will find the plant that we will let grow straight, applying only a few techniques that do not require cutting to preserve its speed characteristics. After taking the first fertilizers the plant is really going very very well and we expect great things, the internodes are going very well and we are almost in pre-flowering. You will find the other one in the next diary worked with Topping / Main Lining / Main Folding Comparison is the salt of experience. We have started the Plagron fertilization program, we are in 100% organic configuration, the soil is recycled Promix + 1/3 fresh soil + 10% Perlite + RQS Mycorrhiza Mix (4gr in mix, 1gr under the small fiber pot). We are administering // 1 ml/l Power Roots - 1 ml/l Pure Zym - 1 ml/l Sugar Royal - 3 ml/l Alga Grow I have doubts about the compatibility of Pure Zym with mycorrhizae. If in doubt, ask the experts, do not mix too much at random. https://plagron.com/en Doubts about the compatibility Pure Zym / Mycorrhizae have been dispelled, they can go well together according to the Plagron experts. If someone tells you that enzymes eat mycorrhizae, which in principle may seem possible, explain to them that it is not true. https://www.royalqueenseeds.it/growing/452-easy-roots-mix-di-micorrhize.html Try this strain, it's a top strain of the last few years very high thc level ---- https://www.zamnesia.io/it/11234-zamnesia-seeds-gush-mintz-automatic.html Brief description of Zamnesia // Gush Mintz Auto is a relaxing hybrid strain that derives from the original Gush Mintz and a high-performance ruderalis specimen. This cross produced a plant with 70% indica and 30% sativa genetics. Her parents have given her a range of interesting traits, including mint and candy flavors and a high THC content of 20%. Smoking these buds provides creative vibes, a sense of euphoria and a pleasant sensation from head to toe. In addition to its enticing flavors and powerful effects, Gush Mintz Auto produces large yields of compact buds in just 9–10 weeks from germination. Gush Mintz Auto is extremely easy to grow, with plants reaching an average height of 70cm indoors and 120cm outdoors, making her ideal for discreet grows or limited spaces both indoors and outdoors. This strain is well suited to LST (Low Stress Training) and performs best in a ScrOG setup (a technique that optimizes light exposure to maximize yields). Punching aromas and deeply relaxing effects As she grows, Gush Mintz Auto's aroma intensifies, releasing sweet and minty notes. This refreshing flavor profile really comes into its own when smoked, offering an inviting combination of minty freshness and sweetness. The effects are deeply relaxing, enveloping the body in a pleasant well-being without being too sedative. Gush Mintz Auto is perfect for those seeking creative inspiration, making writing, painting or music-making sessions smoother and more inspiring. You can find the whole world of growing on Zamnesia and more, just check out the site and you will find "all the best that nature has to offer" in various shapes and colours. The new strains are fantastic and the old ones are no exception... p.s. no hermaphrodites so far, can you growers say the same? ---- // www.zamnesia.com

I flushed the 3 girls with approx. 30l each and of course stopped feeding them about 1 week ago. Therefore, as you can see in the pictures, the older leaves turn yellow. Most of trichomes are milky. We'll see when the girls are ready for the harvest. GG#4 No.1: 100 cm GG#4 No.2: 100 cm Runtz F1 Auto: 45 cm

Oh Ya Baby!! I’m so impress

They are strong. The no4 girl is huge, had to top her, no lst and going to flip her at young age with the rest of her sisters

3/11 Week 11 a day early due to visitors day 28 of Flower Her buds building and coning as any proud female would like. No signs of any deficiencies and the tips are ok so leaving all nuets as is. Halfway to projected harvest date according to Fast Buds, we believe them. Having some humidity issues due to our funky weather. Humidity running higher than is safe on lights out , 60-70%, so installed one small dehumidifier but getting a larger one today to add to it. That is pretty much it, hope for better pics later! Good growing out there! 3/12 Vid and Pics of her We fouled up and miscalculated days in flower today should be 29 as she obviously into flower on 2/12. Hubby just looked at the calendar wrong 😏 Fix what I can sorry folks thought it looked further along than that. pics

This strain looks very delicious for me