Vamos actualizar la tercera semana de floración de estas Biscotti de RoyalQueenSeeds. Un SOG que empezó mal pero que se ven con un buen color y avanzan progresivamente, así que a estar atentos. La humedad es perfecta, la temperatura la e podido corregir y ya la tenemos entre 24/25 grados. Añadi la base,Blue line B de Agrobeta. Esta semana añadí tucán, gold joker, silver, tetra 9, beta shark y génesis también de Agrobeta. Estoy controlando el ph está alrededor de 6- 6,5. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, veremos como progresan pronto. Buenos humos 💨💨💨

Hello All! I'm BACK! I took a month off and I am so ready to get back to growing. I am adding a couple of things this grow different from my last. So look for some of the new things I am implementing. For starters! This time I will be growing from a seed. I purchased my seeds from Seed Supreme. The strain I will be growing this time is going to be SKunk#1. The Skunk#1 that i am growing this time is an Auto Flower. Two things are already different. Germinating from a seed, and growing an AutoFlower. 10/30/23 - Day 1 - Right now I chose to setup my heat mat, put the dome over the mat and put the water cup on the mat. I'm going to let the seed soak for 24 hrs. Tomorrow ill pull it out and put it in a damp cloth in side the dome with the heat pad. 10/31/23 - Day 2 - Happy Halloween yall! This is a good sign, less than 24hrs and the seed has already started to open. I got a paper towel wet, and I moved the seed to the paper towel. Ill keep her in the wet, paper towl. In the cup. Thats on the heat mat under the dome. Important to note, the heat mat is set for 120deg. Its off the ground on a table. I leave it on 24/7 during this whole process. 11/1/23 - Day 3 - I'm Really impressed. She already popped and sprouted a tail! I'm going to wait until her tail is sticking out a lot more before moving her to the LEAF box. So a couple of things got done today. I wanted to set up my Leaf box differently this time. Last grow I use the manual options for water and humidity. I was the person who would refill the water and the humidifier. This time I ran all the correct PVC to allow the Leaf Box to use the automatic process. I should be able to be super hands-off this time. I have an RO water system that I set up to feed the Leaf Box. I posted a Video of me taking the seed and planting it into Rockwool. I could start the Leaf box up now, but I want the seed to grow a bit more. Right now it's still on a hot mat, with plenty of water. I also added some Root Armor. 11/2/23 - Day 4 - The top of the seed is already starting to poke out. This seed has no chill.

She's looking super beautiful after the stretch,she looks strong and ready for full flower let's see how this beautiful California girl performs! 💚 🌱 ✌️

Through week 2 of the stretch and it’s a bloody mess of super crops with about 8”of headroom to the lights.😂. Bit of a disaster definitely suggests a need to lower the table height slightly. My own errogance wins again. I know better than not to top or fim under these conditions, just figured we’d get better control on an extremely short veg. Cycle. Wayyy off there lol. Still another stretch week to go which means they’ll be more cropping to follow with it as well. Is what it is and we’ll have to make due. No issues with the plants whatsoever yet👍. Background This cycle of clones represents all the potential of this F1 line of WalkerBerry OG. Bred by myself over the last couple of years. This genetic shows excellent hybrid vigour, incredibly stable nutrition requirements to date and an eclectic mix of long and short internodal spacing bu specimen. We know we have indica and sativa dominant traits spread evenly across the 6 available clones. Now it’s just a matter of seeing them run out under controlled and pollen free conditions. We’ve labelled each plant and it’s resulting seed accordingly. Once we get to the F2 run, we’ll hopefully be able to isolate down to 2-3 phenos if the bud is any good. From there, who knows. It’d be great to get to a finished, stable generation that would be fem worthy but that could be a very long way off. For now - we’ll focus on this line and see where it goes🤞🤞.

Day 8 1.5l Day 11 1.5l Installed net Day 12 Installed dehumidifier Day 13 1.5l

Last days before chop. Limiting watering and reducing temp really boosted maturing. They ripened fast this last week. I’m glad o made it in time. Next update chop.

Had a productive week for growth and made a few improvements. Bud development has been great this week. The buds are filling in the gaps mostly and creating nice colas. My plan is for the next 2 weeks to feed AN Overdrive. Then flush for 2 weeks i think. She is very sticky and has a sweet smell of candy grape. Still not a blast of smell when i open the tent but smelling her close she's sweet :D I re tied all the outside colas to make them have even spacing again. The red poles were in need of some better reflection so i foil taped them. The sealed box for my carbon filter was made when i was using the cfl. The way i needed to hang the light meant the outlet from the sealed box into the tent could only be 4 inches in diameter. With the Cob Led, it's attached on the side poles, so decided to max out the outlet. It is the full 6inches and cooling is more efficient now. (Maybe i should try origarmi) The black clip on fan was touching the tent so not drawing air as well. Also made an annoying vibration if touching the tent wall. I used the extender i had on the side vertically and mounted it horizontaly. Has opened the tent out a bit and have free space behind the fan. Have add photos of all improvements. Checked on the outdoor grow and is looking good. Did improvements on it last week by adding a 'gate'. Had spotted deer when visiting previously so didn't want to take any chances. Attached photos from visit yesterday. Video is from week before when i did the gate and surround supports. Left plant Glue Gelato Auto is my friends. It's the same age as my Wed Cake but grown outdoors it's whole life. Right plant is Purple Punch auto which is mine. 4 weeks younger than my Wed Cake and Glue Gelato but started indoors and then planted outdoors. This spot was only for 1 plant originally but after the situation from the other spot we had to take the GG there. Thanks for checking my diary See you next week and happy growing

To get higher temperatures I placed the growbox near the radiator, dimmer still at 25%, boiled tap water also this week, this guaranteed me an ideal for the beginning, from now on I will use mountain water which will allow me to use less fertilizer.

Hi guys, What's up? Welcome back to Queen Peaky's Flower Gardens Our girls keep eating and growing healthy and strong 🍭🍭🍭 See you around

Magic Melon is taller and has grown faster since the first week, now it's buds are growing twice as fast as the Super Silver Haze. Lights are 12 inches from top of buds.

Decided to turn on my bloom lights on my Optic 2 Gen 3 LED which incrediblely increased the temp so lucky 🍀 I have a carbon filter from ac infinity “4 and a inline fan from Vivosun which really work great to suck the stagnant hot air out of my 32”x32”x72” tent. Other then that have been feeding these girl Urb& liquid seaweed and they seem to be loving it. Would love to make a compost tea soon.

Hallo zusammen 🤙 Sie wächst sehr schön und macht keine Probleme. Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent

Muy contento con los resultados, hubo un error en el riego en la Mesa B i se estubo regando durante medio dia, exceso por riego. Error arreglado del sistema de riego. Dejo descansar 2-3 dias. La mesa A todo va bien.

Ready

—SETUP— .BOSSLED LED 1800W full spectrum, real power consumption is +-250W. .Grow space 60X100X200(a simple shower box. .AN nutes and other simple additives. .Grow medium is 60% peat, 30% perlite, 10% organic correction(worm castings), 5 gallon fabric pots(18l). —BRIEF— Hi there, I have tried already done this genetic outdoors, in poor lighting and a general purpose nute from Neudorff, yielded 25g dry, in 3gallon pots same medium. So this is a good experiment, lets see indoors how she will compare. —GERMINATION— My germination process always start by scarifying the seeds, i created a little tool for that. I just a little container with sandpaper walls. Shake gently for about 60 secs+, this allows for the water to penetrate better in the seed shell, once you soak. Then i soak overnight from 12 to 20 hours max. From there i either plant straight or use the paper towel method to see the tap root before. If you are a bit on the impatient side seen the tap root is advisable so you see some movement before planting. Lol! —ROYAL QUEEN SEEDS . QUICK ONE . INFO — Chose this strain because is basic and I have to travel for a month soon, and someone else is going to take care for this time. :) Quick One is a fast-growing autoflowering strain. This was one of the first autoflowering strains developed. When it was first released, it was one of the quickest growing strains on the planet. THC: 13% CBD: Low Yield Indoor : 275 - 325 gr/m2 Yield Outdoor: 100 - 150 gr/plant Height Indoor: 50 - 60 cm Height Outdoor: 60 - 100 cm Flowering: 5 - 6 Weeks Harvest month: 8-9 weeks after sprouting Genetic Background: Strong Indica x Ruderalis Type: Sa 10% In 60% Ru 30% Effect: Physical Climate: Mild —RQS QUICK ONE GERMINATION UPDATE— My mood said to me to plant straight, so scarify > soak 18 hours +- > plant straight. Seedlings look a bit odd, with a yellow center, let's give her some days in and see what happens next.

Took some clones & defoliated/lollipopped I started building a veg tent and went with a 2x2 AC Infiniti equipped with the 4inch cloud line duct system was a boring grow week.. ready for flower