10/29/19 - All is going good. The stretch always amazes me on how fast they grow! Watering 4 cups of water each plant every three days. I did not switch to 13/11 yet. I will do that the last few weeks. I moved the lights up to compensate for the stretch so lets see what that does. 10/31/19 - Moved the one that is not flourishing from the net to the side. The other are rocking the house!!! Did a bunch or rearranging and LST in the net. Should be set this week to leave it all alone. I also did a bunch of defoliation. Too bad I was not going to clone this strain anymore, cause there was some great cuttings. 👌

Mild nitrogen toxicity still in effect from a couple weeks ago, leaves showing a deep green with a bit of waxiness to the shine and tell tale curl under. New growth seems to be growing normally however, so the past couple flushes seem to be helping. Bud development is slow while stem growth is advancing pretty rapidly, relatively so. Just waiting a few more days to start adding GHE micro & bloom nutes with a very minimal (.5 ml) amount of floragro and armor si.

Black Cream auto is hands down, the most beautiful strain that I've grown to date! 75grams isn't bad for a day 60, from seed harvest!

End of week 8 and the beginning of week 9. 1-2 weeks left before I chop these girls down. All my girls are loving the new light and so am I! Highly recommend. Only things to report on is, I’m still flushing, my buds are getting denser, and also they’re starting to turn purple! This is my first plant to actually turn purple and I grew a plant just before these two that’s were supposed to be purple, but never did change colors. Fun fact: my favorite bud to smoke all time is purp diesel, so this is great for myself! Well, see you guys on the next update. Happy Growing! ✌️🏾

End of week 8 and the beginning of week 9. 1-2 weeks left before I chop these girls down. All my girls are loving the new light and so am I! Highly recommend. Only things to report on is, I’m still flushing, my buds are getting denser, and also they’re starting to turn purple! This is my first plant to actually turn purple and I grew a plant just before these two that’s were supposed to be purple, but never did change colors. Fun fact: my favorite bud to smoke all time is purp diesel, so this is great for myself! Well, see you guys on the next update. Happy Growing! ✌️🏾

The flowers really started to show this week. Still looking healthy. I ran out of the biobizz grow feed this week so hopefully don't need any more of that.

Really started to show flowers this week. took her out of the tent for a clean of the tent. feeding with biobizz bloom, topmax and grow.

Well this girl has recovered very well she was doing just horrible because I had the lights to low at 22" when 34" was way better . These led lights had me thinking I could go lower then I could ... She is doing great and will be getting the nutrients she needs I'm feeding her a 100% Canadian and organic line that got from a local company .. getting excited to see where we are next week and about do her transplant too. Cheers and thanks for following along .. canna family

Un gran cultivo a llegado a su fin,excelente cepa muy productora y facil de cultivar,solo aplicando cada 10 dias aceite de neem todas las plagas mantenidas a raya,cultivo sano de principio a fin,cada cepa cultivada de Royal Queen es cada vez mejor..cada cultivo da mas produccion y hermosas flores...muy satisfecho con todo el cultivo,le di una semana mas de floracion de lo indicado por el banco y valio la pena...cultivo muy homogeneo y cada semilla muy estable...muy feliz!!!

flowers really packing on weight this week. I've had to tie up supports and stripped off quite a few of the older fan leaves. I've started the flush this week to go with the strain timings. any flush advice would be appreciated.

flowers really packing on weight this week. I've had to tie up supports and stripped off quite a few of the older fan leaves. I've started the flush this week to go with the strain timings. any flush advice would be appreciated.

Week 7

Got a jewellers loupe this week love looking at the flowers! flowers are coming along nicely. starting to struggle with the humidity rising in the tent so any tips are appreciated.

Got a jewellers loupe this week love looking at the flowers! flowers are coming along nicely. starting to struggle with the humidity rising in the tent so any tips are appreciated.

2nd Week Report 24/10/19 - 31/10/19 25/10/19 I didn't flushed, but I filled the reservoir with 3l of 10% strength solution. Added to the current solution the same nutrients quantity as the first week (except for "Root Stimulator" and "Enzymes" that the first week were 20% strength and now got back to 10%). Now the reservoir should be filled with a 20% strength solution 29/10/19 - CMXL is 10cm height and it is growing really well along with his roots. - LSD is 6cm height and it is growing a little slower like his roots, but both of them look healty. I think in some days should start growing fast like CMXL Added 2 low frequency (113kHz) Ultrasonic Piezoelectric Discs: - One for the root chamber that should help with root expansion as it nebulize solution and the fog carries nutriments (like a small aeroponics integration) and will help my attempt of cloning. - One will stand in a 20% solution next to the plants to increase Humidity (and maybe feed them a little). I'll try to set them running 24/7 Switched water pump that sprays Rock Wool from 5sec every 30min to 6sec every 60min. Next week I plan to stop using the pump as "Top Feed" if roots will be well developed and probably I will use it as "Recirculation Pump" to keep nutrients in reservoir mixed better 30/10/19 Roots exposed to air inside reservoir got a little yellow after inserting the small fogger, so I will try to keep it 30/30 seconds ON/OFF. I will check next day if it's helpful to existing root o as root propagator for clone trial Topped CMXL and did a little of LST just by bending the main stem to expose the small growing next to fan leaves. The cutting was immediately dipped in a solution made by honey and Root Stimulation (the same I use for reservoir solution as it should contain rooting hormone), hoping it covers the cut like a gel and don't let the oxigen get in the cut until there will be some new growing. After that I put the cutting on the lid without any pot, as you can see in the picture some tape is covering the hole and it holding the topping. I covered it with a small jar to maintain humidity, hope to see some roots next week ;) I plan to fim LSD tomorrow if tonight grows enough 31/10/19 Filled the reservoir with 6L 20% strength solution and after that added 10% nutriment for 36L directly into the tote (like I did last week). Now nutrient solution inside reservoir should be 30% strength and it's ready for the 3rd week Pinched LSD Top with my fingers and applied LST by bending a little the main stem. Hope this FIMming works and returns better yield ;) Cloning trial didn't worked (I was expecting nothing, just a test), the cut part of the topping is already dry. I knew the topping was too short, next time if I try to clone his stem will be at lest 2cm Last Update 31/10/19 Next Update 03/11/19 with the next week See you guys ;)

2nd Week Report 24/10/19 - 31/10/19 25/10/19 I didn't flushed, but I filled the reservoir with 3l of 10% strength solution. Added to the current solution the same nutrients quantity as the first week (except for "Root Stimulator" and "Enzymes" that the first week were 20% strength and now got back to 10%). Now the reservoir should be filled with a 20% strength solution 29/10/19 - CMXL is 10cm height and it is growing really well along with his roots. - LSD is 6cm height and it is growing a little slower like his roots, but both of them look healty. I think in some days should start growing fast like CMXL Added 2 low frequency (113kHz) Ultrasonic Piezoelectric Discs: - One for the root chamber that should help with root expansion as it nebulize solution and the fog carries nutriments (like a small aeroponics integration) and will help my attempt of cloning. - One will stand in a 20% solution next to the plants to increase Humidity (and maybe feed them a little). I'll try to set them running 24/7 Switched water pump that sprays Rock Wool from 5sec every 30min to 6sec every 60min. Next week I plan to stop using the pump as "Top Feed" if roots will be well developed and probably I will use it as "Recirculation Pump" to keep nutrients in reservoir mixed better 30/10/19 Roots exposed to air inside reservoir got a little yellow after inserting the small fogger, so I will try to keep it 30/30 seconds ON/OFF. I will check next day if it's helpful to existing root o as root propagator for clone trial Topped CMXL and did a little of LST just by bending the main stem to expose the small growing next to fan leaves. The cutting was immediately dipped in a solution made by honey and Root Stimulation (the same I use for reservoir solution as it should contain rooting hormone), hoping it covers the cut like a gel and don't let the oxigen get in the cut until there will be some new growing. After that I put the cutting on the lid without any pot, as you can see in the picture some tape is covering the hole and it holding the topping. I covered it with a small jar to maintain humidity, hope to see some roots next week ;) I plan to fim LSD tomorrow if tonight grows enough 31/10/19 Filled the reservoir with 6L 20% strength solution and after that added 10% nutriment for 36L directly into the tote (like I did last week). Now nutrient solution inside reservoir should be 30% strength and it's ready for the 3rd week Pinched LSD Top with my fingers and applied LST by bending a little the main stem. Hope this FIMming works and returns better yield ;) Cloning trial didn't worked (I was expecting nothing, just a test), the cut part of the topping is already dry. I knew the topping was too short, next time if I try to clone his stem will be at lest 2cm Last Update 31/10/19 Next Update 03/11/19 with the next week See you guys ;)