Light settings 12/12 on at 9.00am off 9.00pm Light power= 62% 150w Radiator settings LIghts on Turn on if temp drops below 23c Turn off if temp goes above 23c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Dehumidifier settings LIghts on Turn off if humidity drops below 60% Turn on if humidity goes above 60% LIghts off Turn off if humidity drops below 62% Turn on if humidity goes above 62% Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 9 Min speed 4 VPD aim 0.8-1.2 Wednesday 1/3/23 Day 36 Autofeed 5 15 minute runs Water 10L Ec=0.21 Ph=6.5/7.0 3L left Roughly 2.3L each. #1 no runoff 7.15pm Lowered light 3cm #1 DLI= 26.8 Thursday 2/3/23 Day 37 10.00pm Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 10 Min speed 5 Friday 3/3/23 Day 38 Autofeed 5 15 minute runs Feed 10L Ec=1.73 Ph=6.3 2.5L left. Roughly 2.5L each. #1 no run Saturday 4/3/23 Day 39 5.00pm #1 Height= 28CM Dist= 40CM DLI= 25.3 Lifted lights 3 clicks and Lst and defoliate Sunday 5/3/23 Day 40 Bit of Lst and scrogging Monday 6/3/23 Day 41 Autofeed 5 15 minute runs Feed 12L Ec=1.78 Ph=6.3/6.3 4.5L left Roughly 2.5L each. #1 no run #1 DLI=25.8 Lifted light #1 Height=29CM Dist=46CM DLI=21.0 Tuesday 7/3/23 Day 42 (Day 14 flower) Radiator didn't come on when it should have. It was cold today and I don't understand why the sensor didn't trigger the Radiator. #1 Height=29CM Dist=46CM DLI=21.0 The 2nd week of flower has gone well. I have tried to keep the canopy of the overall grow as level as I can, the only problem with running different strains is they all have different traits and grow at different speeds. Nearer the end of the week the weather started getting cold again so the radiator is going to be working a bit more over the next week or 2. #1 Wedding Cheesecake FF still hasn't started stretching so I'm thinking she is going to be a short and bushy. She is looking really healthy and I think she is spread out enough not to cause any problems with airflow. Power used for week Light (1.77+1.84+1.84+1.84+1.84+1.83+1.84)=12.8Kw Extractor (0.19+0.24+0.25+0.27+0.31+0.31+0.41)=1.98Kw Fans (0.48+0.47+0.47+0.47+0.47+0.48+0.48)=3.32Kw Dehumidifier (0.69+0.65+0.0+0.01+0.6+0.02+0.69)=2.66Kw Radiator (3.3+3.98+3.38+3.16+3.8+3.31+4.07)=25.0Kw Water pump. (0.02+0.0+0.02+0.0+0.0+0.2+0.0)=0.24Kw Total for the week=46Kw Back in a week. Thanks for stopping by.

In my quest for the perfect modern grow room, I got my hands on a super cool device: SensorPush. Each SensorPush is a tiny low-energy-bluetooth thermomether+hygrometer. I have 1 sensor in the indoor tent and 1 sensor in the outdoor micro greenhouse. Both are connected to the "SensorPush Wifi Gateway", allowing me to access to the datas at anytime from anywhere in the world. SO COOL! I started to collect datas more than a week ago and it has been already so helpful, I noticed that every single adjustment (side fan speed, thermostat mix/max, window opened/closed, driver dimming..) has a direct and immediate impact on the environment, and being able to see the detailed live statistics is the perfect way to adjust the parameters. I had one important issue this week: my timer was acting weird and the light was turning on 40 mins while the plants were in the middle of their night, but thanks to SensorPush I was able to notice the problem immediately and fix what could have gone dramatical. I love these sensors so much that I've started to dig into the SensorPush API, and guess what: after a few minutes I was able to get the datas showing up on my webcam feed, so now my webcam app is also showing me the temp+RH! SO COOL! Thanks for stopping-by and stay tuned for more big-data 😎

Week 6 flower : I stopped the pk half way through week 6 so it had a total of 10 days feed with pk13/14 I also cut out the silicone and calmag on the same day . I defoliated a little as there was a lot bud sites covered . I am going to start the flush in 3 days which will be . .6 1/2 weeks into flower , going to give them 2 weeks flush with plain water . Still have a bit of leaf curl from the light being so close I did move it but because the canopy is not so even it’s hard to get it right .

Very lite feeding this week on the first day. Then I finished the week with r/o water. She is going dark for about 60 hours then to harvest. The smell finally came out and it’s pretty normal and pleasant IMO.

July 5 - YES! I know, was beautiful.. i've done this for height problems but.... No worry, stay tuned cause she will return more strong than before😜💚

Week five! This plant continues to grow despite having some nutrient issues. When the first yellow tips appeared, I thought I had overdone it with the nutrients, but they kept coming back even though I halved the dose. At the beginning of the week, I gave her 0.5 L with half the nutrients and during the week another 2 L of water only, hoping she would recover. Studying the problem, I discovered that it could be more of a K block. Either something is preventing proper absorption, or she is simply not getting enough. During the sixth week, I will try adding 0.25 ml/L of Atami B'Cuzz Blossom Builder to the nutrient chart to boost N and K and see if anything changes. Despite everything, this week she reached 63 cm and is still growing upwards towards the light. The lamp was dimmed to 75% all week and then brought up to 100% on the last day, still at 30 cm. I hope to be able to recover from this minor setback and get the best out of this girl. Week six is coming, are you ready? I can't wait!

The plants are happy and their buds are growing, although not super quickly. Sour lemon OG is definitely the most pollinated and its buds are the airiest with seeds emerging. The hermie in the backyard fell over last night and snapped a few branches :( I patched him up and I hope he's okay! Humidity is still high but dropping (75% RH today) as the weather outside gets cooler.

Que hay fumetillas, terminamos el primer mes de floración, pensé que serían algo más rápidas pero bueno, tengo tiempo, aun así hay que ver hasta el final que es lo que sucede. Controlamos ph humedad por debajo de 45% temperatura media de 24.5 grados, aumentó una vez por semana la cantidad de ml por producto, último cultivo con advancednutrients, los próximos proyectos los trabajaré con AgroBeta. Buenos humos fumetillas 💨💨💨

Week 6 Flowering - More trichrome production now, but still a long ways to go. That's both exciting for yield, and tragic for my ADHD lol... She better look like Edwina Scissor-hands when she's done... I gave her a good watering at the end of this week with a blend of “late bloom” nutrients. Having such a PITA of a time watering as the fabric pot is too big for the tray. If you look at some of the photos, you’ll notice I’m basically using a party serving tray as a water retainer at the bottom since I couldn’t find anything in the stores. I might untie the branches in the last week, and dunk the whole pot into a large tote of water and just keep it in there for the last bit.

Sorry for the late update. I harvested all plants together to dry in the tent for a slow dry. It took 8days till the stems broke/snap and everything felt dry by the touch. I cured and stored in grovebags. After 10-14days of cure, the flower were ready to smoke. Had to burp the bags, because the rh was a bit to high, but all in all unfelt very safe with the geovebags. Very happy with the result. In the end I got 240g of flower from all plants with 200watt led, so a bit over a 1g/watt. Goal for next run is to get 2g/watt. The bagseed flowers give a nice and strong high, not the greatest taste, but smokable.

This lady is slowly starting to stretch with short internodes. The grasshoppers are doing the defoliation for me. It's always been sunny for a month, not a cloud on the horizon.😎☀️☀️

Another week has come and gone and we are off to the races. this will be the last big feeding. I wanted to give them a PK boost in mid flower and to make sure they have enough food to last them till the end of the cycle. the beans look like they took hold I will know more in about 3 weeks. If any at all got the girl dust on them for sure. The clones are fattening up, not to be prize winning buds but good enough for a squish in the rosin press. I am seeing some signs of light burn and a little nutrient burn but nothing a good flush won't cure. They are starting to get more frosty and the smell is getting more pronounced. very complex sweet gas fruit is the best way to describe it. well that's it for now be well all and don't for get to vote.

START OF WEEK 4 FLOWERING. NUTRIENTS SAME 4 ML PER LITER RO WATER OF BOTH A & B. 2 ML PER LITER BIG BUD. MIXED UP 8 LITERS OF NUTRIENT SOLUTION --------------------------------------------------------------------------------------------------------- Day 64 April 18th - 2019 Both ladies had a little trim to get rid of thick interior. Day 64 April 18th - 2019 Both Jessica Rabbit & Elly May were fed 1.5 liters of nutrient mix. Day 64 April 18th - 2019 Temp in tent is @ 78.4° F. Day 64 April 18th - 2019 Humidity in tent is @ 51%. Day 64 April 18th - 2019 Jessica Rabbits Coco temp is @ 70.2° F. Day 64 April 18th - 2019 Elly Mays Coco temp is @ 70° F. --------------------------------------------------------------------------------------------------------- NOTE - Day 65 April 19th - 2019 The Lady in the coffee can is a clone from the Blue Cookies. The clone was 2 weeks old put in soil in the coffee can It was put in the tent straight to flower No Veg time at all the clump of leaves at the bottom was how tall it was. I have been feeding Her the same Nutrients I am using for Coco flowering with the Big Bud for Coco. --------------------------------------------------------------------------------------------------------- Day 65 April 19th - 2019 Both Ladies are looking good after their little trim. Day 65 April 19th - 2019 Temp in tent is @ 81.1° F. Day 65 April 19th - 2019 Humidity in tent is @ 55 %. Day 65 April 19th - 2019 Jessica Rabbits Coco temp is @ 71.8° F. Day 65 April 19th - 2019 Elly Mays Coco temp is @ 71.6° F. Day 66 April 20th - 2019 Ladies are looking good coming alone. Day 66 April 20th - 2019 Temp in tent is @ 79° F. Day 66 April 20th - 2019 Humidity in tent is @ 40 %. Day 66 April 20th - 2019 Jessica Rabbits Coco temp is @ 69.3° F. Day 66 April 20th - 2019 Elly Mays Coco temp is @ 69.4° F. --------------------------------------------------------------------------------------------------------- Day 67 April 21st - 2019 Both Ladies received 1 liter pre-mixed solution --------------------------------------------------------------------------------------------------------- Day 67 April 21st - 2019 The girls are looking fine. Day 67 April 21st - 2019 Temp in tent is @ 79° F. Day 67 April 21st - 2019 Humidity in tent is @ 47 %. Day 67 April 21st - 2019 Jessica Rabbits Coco temp is @ 70° F. Day 67 April 21st - 2019 Elly Mays Coco temp is @ 70° F. Day 68 April 22nd - 2019 Ladies are looking good no issues. Day 68 April 22nd - 2019 Temp in tent is @ 71.2° F. Day 68 April 22nd - 2019 Humidity in tent is @ 57 %. Day 68 April 22nd - 2019 Jessica Rabbits Coco temp is @ 67.6° F. Day 68 April 22nd - 2019 Elly Mays Coco temp is @ 66.6° F. Day 69 April 23rd - 2019 Both Ladies looking good. Day 69 April 23rd - 2019 Temp in tent is @ 69.4° F. Day 69 April 23rd - 2019 Humidity in tent is @ 61 %. Day 69 April 23rd - 2019 Jessica Rabbits Coco temp is @ 65.7° F. Day 69 April 23rd - 2019 Elly Mays Coco temp is @ 64.8° F. Day 70 April 24th - 2019 Both ladies are coming alone. Day 70 April 24th - 2019 Temp in tent is @ 67.1° F. Day 70 April 24th - 2019 Humidity in tent is @ 61 %. Day 70 April 24th - 2019 Jessica Rabbits Coco temp is @ 65.2° F Day 70 April 24th - 2019 Elly Mays Coco temp is @ 64.0° F.

Greetings, fellow cultivators! It's time for the Week 2 Veg Report on our marvelous Epsilon F1, and let me tell you, the growth has been nothing short of spectacular. Our little green companion has truly spread its wings and embraced the journey of life. Now, let's talk about the VIP treatment our Epsilon F1 received this week. I decided it was time for a change of scenery, so I gently transplanted her into a spacious 11 L fabric pot graciously provided by Royal Queen Seeds. Now, let's dive into the wonders of fabric pots. Fabric pots are like a luxury spa for plant roots, allowing for optimal aeration and preventing over watering. The fabric's breathability promotes air pruning, stopping those pesky circling roots and encouraging a robust, healthy root system. It's like a tailored suit for our Epsilon F1, allowing it to grow with style and comfort. But that's not all, my friends. During the transplant, I whipped up a magical Aptus Holland super soil mix, and oh boy, it's a nutrient symphony. Let's break it down: Micromix Soil: This powerhouse contains a mix of microorganisms and stimulants, creating a microbial wonderland in the soil. It's like inviting the best party guests to the root zone, promoting nutrient uptake and overall plant health. Substrate Buffer Powder: The pH magician in our mix. It conditions all substrates, ensuring a stable pH environment for our Epsilon F1. No more pH rollercoasters, just smooth sailing for our green friend. All-in-One Pellet: The time-released 100% organic pellet fertilizer that's like a Michelin-star meal for our plant. It comes with a compounded NPK fertilizer, essential microelements, and even L-amino acids. It's the complete package for a happy, well-fed plant. And, of course, we can't forget the star of the show, Mycor Mix! A mixture of various species of endomycorrhizae, working tirelessly to support our crop. Fixed on a vegetal carrier, it feeds and protects the fungi, creating a symbiotic relationship that's pure magic for plant growth. Our Epsilon F1 is reacting like a rockstar to this nutrient fiesta, and I couldn't be prouder. Shout-outs to Royal Queen Seeds for the stellar genetics and the thoughtful pot, and major kudos to Aptus Holland for being the wizard behind the curtain, crafting nutrients that turn plants into botanical marvels. Stay tuned, dear readers, as we watch our Epsilon F1 continue its journey of botanical excellence. As always thank you all for stopping by and for supporting me on this journey, i am super passion about growing and fell blessed to have you all with me on this new journey <3 <3 <3 Genetics - RQS EPSILON F1 Ligth - LUMATEK ZEUS 465 COMPACT PRO 
Food - APTUS HOLLAND 
 
All info and full product details can be find in can find @ https://www.royalqueenseeds.com 

https://aptus-holland.com/
 
https://autopot.co.uk/ 

https://lumatek-lighting.com/ With true love comes happiness <3<3<3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3<3<3 <3 <3 <3 Growers love to you all <3 <3 <3

Day 2 : Plant is looking nice and healthy , will update pics later , as for today , snow man building with the little man :) Day 3 : ppms sitting at a stable 650 , little dawg is looking awesome, starting to bulk right up!! Day 4 : dawg drank 4 litres of water and 120 ppms overnight , upped ppm to 750. Day 5: This little dawg just keeps on drinking haha... Further stretch and bud sites starting to open up. Day 6: slight defoliation and tightened wires to open the inner branches

Welcome to Day 36 .... first Day of pre flowering 😍🙏👍 Day 37 .... massive leave cuttingto get space for the queens 😶🙏 Day 38 all strains forgive me the massive leave cutting 😃👌🙏 Day 39 everything seems to be ok 😍🙏👍 Day 40 this will be good i think 😃👌 Day 41 the growtent is really good filled up 😃👌🙏

Just a little outdoor test run project with minimal maintenance. Smells divine

Watering has jumped up to every 2 days ph 6.3-6.8 with 20% runoff Flower Fuel has been added to AP,GG and ZK watering's. Lights have been lowered to 24-28 inches. White Widow just started flower at end of the week. Still waiting on the Cream Cookie. Doing light Defoliation to expose bud sites to the lights.