Beginning of week.. I went up a tad on the nutes today.. And went down on the light power last week.. It was about 65% - 70% power which was quite a bit, I guess.. I put it at 50% power and she is finally starting to get some height to her.. I noticed more pistils toward the very top. I really hope she doesn't start flowering too soon.. I'd like to get some LST done on her. But she is happy and healthy! Next day... Even more pistils! Its been awhile since I grew an auto.. So I kinda forgot how early pistils can start poppin out but still be in veg (preflower). I just really wanna turn this girl into a flat bush! 10 mins later... Ok.. So looking back at my other autos.. This is pretty typical for them to start showing preflower this early.. She should still have 2 or 3 more weeks of veg with preflower! Mid week.. This is a day early.. But close enough.. 3rd week and growth is beginning to explode! The very first node's branches aren't really doing much.. Plus they are damn near to the ground.. I'm wondering if I should just remove them.. Maybe not yet.. But soon.. Or when I finally apply some LST. She is doing great!... No deficiencies.. No excesses.. Autoflowers are a trip! Can't wait to see what she looks like in another 7 days! I wanna try to do the entire grow without removing much, if anything.. But if this bottom branch doesnt start doing something.. I'm gonna have to remove it.. Its just bothering me way too much lol. Actually mid week.. SoI have been noticing a little bit of clawing and darkness.. BUT ONLY on the new growth.. As the leaves get older they seem to straighten out and lighten up a bit.. But I'm pretty sure it's nitrogen toxicity.. So I went down from .66mL/L to .33mL/L.. I use 3L to water daily.. So basically 1mL per feeding of all the base nutrients and the CalMag.. The Floralicious Plus has a bit of nitrogen too so I went down a tad on that as well. I read someone else's grow that says these girls are a bit sensitive to nitrogen.. So that's where I'm at now. Flushed this morning, and now for a small feed tomorrow morning. Will be updating with pics at the end of this week. Later that night.. Went ahead and flushed with just 2L of pH'd water.. Going in - pH: 6.3 PPM: 240.. Runoff - pH: 6.1 PPM: 640... So the PPM is still a bit high, but during the feed tomorrow, it should go down some still.. I should have ALOT of runoff tomorrow. I had the same amount I normally do when I use 3L just from these 2L.. Just cuz its 12 hours early.. The medium was still nice and moist.. And will still be in the AM for the next fertigation. Next day... Waking up this morning, I found that the oldest set of leaves that had been clawed cleared up.. For the most part.. Still dark asf.. But not as much clawing..the newest set were still clawed tho.. Which is understandable.. I made 3L of nutes.. Only used 2L in the AM.. Going in pH: 6.3.. PPM: 420... Runoff pH: 6.2.. PPM: 480... Not bad.. And I still have 1L left over which I am going to have to give her later today.. And will update with the runoff info also. Some say not to worry about the runoff pH.. But I think that is only because when people see it really low, they tend to give make the nutes waaay too high in order to combat the low runoff.. I just make my nutes 6.5 till ai see the runoff coming out at the area that works best for my grows.. Which is 6.2 or 6.3.. Let me explain why I use 6.2 to 6.3... My first 2 grows in coco I was using 5.8 to 6.0.. It worked well in veg but it was only during the transition and beginning of flower that I had calcium defeciency.. GWE website said that in hydroponics/coco that calcium is best absorbed at 6.3 or so.. So ever since I've just ran my girls at 6.2 or 6.3.. No lower, no higher.. The entire grow.. And haven't had any issues with deficiencies since! So that is MY sweet spot.. I may let it drift to 6.1 or 6.4.. But I try not to, for the most part. Later that night... I went ahead and did 1L of pH'd water first.. Then did the 1L of nutrient water.. Runoff came out at 420 PPM 6.2 pH... Nice... Also, I went ahead and ponytailed the top and pulled some of the longer branches on top of the fan leaves.. I'm only going to keep it ponytailed for the rest of the day (6 hours left of lights on).. Never tried this before, but with these super fat indica leaves blocking literally every branch.. I figured it couldn't hurt to give it a try. I may do it for another 6 hours tomorrow.. But I havent thought that far into it yet. I just want her and her branches to be long enough to begin some LST by the beginning of next week.. And already more than halfway through this week. Happy with the way things are going, for the most part... Almost end of week.. Ponytailed her again for another 6 hours this morning.. Just trying to give the side branches a little head start before the LST next week. End of week.. Welp.. I couldn't wait one more day to apply some LST.. I went ahead and did it today.. I also removed the bottom node, leaves and branches.. They were weak branches and I figured I could get them to take root and breed some seeds with them using Collidail Silver method! I really like how these branches have grown on this girl! It's like they already grew into a lollipop!!! Still only using the light at 50% power.. Which is helping keep the temps down a bit... Niceeee... I haven't defoliated anything (except the bottom node due to very weak branches and horrible looking leaves.. Which I'm guessing is because they were so low, possibly getting nutrient water on them during watering) but again, cloning those to breed with! She has completely exploded this week! Very happy with this girl! On to the next week!!!...

I (pre-moistened) worked in 2.5 gallons of de-chlorinated tap water, with my fingers into this high-porosity soilless growing medium. This variant is very dry, and seems to reject water, until moistened(3cu ft compressed, Agro a5-hp from local nursery). Even after the 2.5 gallons of water was worked in (with no runoff), there was still a dry patch at the bottom of the pot.. I figured it would start to absorb from the wet medium on top, over time. It is now Day 10, and the moistened medium never needed to be watered since day 1. The medium is almost dry enough to be watered (see final picture). Maybe one or two more days. I will poke/scratch the soil daily, to ensure that I wait long enough, to not over-water.

Smell got more intensive and Ladies are more thirsty At day 8 of flowering we thought the plants are a bit too small so we gave them more space to the LED, about 70cm with 200watts Also they got 4ml/l of bioheaven

struggled a lil bit with humidity and temps but things were still okay

Flushing nicely, leaves fading to purple and yellow. Will be flushed for a total of 12-14 days and then hung.

Week 7 for Lemon OG by SSSC The indoor Runt😂 Starting to bounce back from its initial overwatering/nitrogen toxicity she had from when it was transplanted. Finally starting be able to top her a few times. She's at 6 tops for now waiting a few days before I top her again & I reckon her lower branch will be ready for a topping soon aswell. She was fed twice this week with some FPJ, Regulator, Enzym+ & Startboooster by @aptus_portugal just to give it an extra boost! Think the Enzym+ is helping clear that build up of nitrogen i have. 😇 Starting to remove herself from the runt list😂Hopefully in the next few weeks she's out of it completely.

🍼Greenhouse Feeding BioGrow & Bio Enhancer ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱 DUTCH HEADSHOP SEEDS: www.dutch-headshop.eu www.dutch-headshop.nl ONE STOP SHOP . 100% germination success on first try! with HUGE seed selection! . Very friendly customer service . Best bio-seed packaging . Sells other products @ best prices: . Nutrients . Vaporizers . Smoking accessories (grinders, cones) . CBD Tinctures . Resin Extracts . Boveda humidity packs . Ziplock bags . Other health supplements such as: . Lion’s Mane Organic Capsules . Hemp Seed coffee

En una semana cambiaré a maceta de 7 litros

Looking good. Top dressed 15% worm castings

So we start a week of flush 😁 but only for two plants.The other two i need to cut it before. One of the plant, all of buds were dry af 🤯 i dont know whats happend. The second one has only the one bud on the top dry. Anyway what I saw and what i felt when i smoked those dry buds i can only say that I'm high AF 😂😂😂😂😂 Guys this strain is totally amazing, takes you to another dimension, to the moon 😂🤩 About the weight: HULKBERRY PLANT N1: 240G WET WEIGHT HULKBERRY PLANT N2: 560G WET WEIGHT Rest i will update next week because now i going to the moon 🤪👌

Hello. This is the end of week 10 of flowering... and it's harvest time. Just shot some quick video's to show what they look like after flushing. Should take around 4 or 5 days to harvest all 13 plants. With the weighing of the raw branches before wet trimming them and writing down the weight, And the taking of the photo's, making them look good, it takes a little longer to harvest doing a diary. OK. See you in a couple of weeks. Chuck.

Been a great germination week with plenty of growth, let's hope the next 2 weeks will provide enough growth, it will be interesting now I've amended the ph over the whole garden, ph was at 6.6 run off on other strains in the same medium, started to see some deformities, let's see if this fixes them issues before they arise with this baby 👶

420Fastbuds FBT2313/Week1 Week 1 update on these new sprouts. Been a week since they sprouted and so far seems good. I did switch from misting the top soil with my sprayer to feeding 500ml of water and 1/4tsp/gal strength General Hydroponics Calimagic about every other day. Started seeing some rust spots so I'll keep a close eye and make sure it doesn't get any worse. Over all Happy Growing

Incredibile ma vero...ho trovato alcuni ragnetti rossi in una zona del palco. Dopo aver rimosso la parte "infetta",ho dato una passata di piretro(essendo solo alla seconda di fioritura,non dovrebbe creare peoblemi ma,per ogni evenienza,mi sono procurato dell'olio di neem) e per ora,sembra che i ragnetti rossi siano definitivamente deceduti,speriamo tutti. Cmq il mio bellissimo veleno cresce e ci sono un sacco di cime che si stanno riempiendo di peletti bianchi

Que hay familia, vamos con la cuarta semana de floración de estas Runtz de Zamnesia y empezamos con riegos intercalados cada 48 horas controlando siempre el Ph, que ahora mismo lo dejamos en 6.5 . Temperatura y humedad dentro de los parámetros correctos. Seleccioné de las 5 plantas, 3 , que creo que son los mejores ejemplares que por el momento están creciendo bien y tener tienen un buen color, se ven bien sanas, todo normal hasta ahora, van cogiendo forma y están produciendo una tricomada bastante seria, están increíbles. Vamos viendo cómo progresan. Hasta aquí todo, buenos humos 💨💨💨.

Starting to see the preflower and one of 3 is asymmetrical... worried it might turn out to be a hermaphrodite plant. Also scared to bend the stem to lst, don’t wanna snap it. Any tips on how to start lst with main stem foolproof much appreciated 😅 Should I let them dry out a little more then usual when bending or it’s not going to soften the stem? Should I counteract the top tension point of the bend with one on the bottom for support and do it gradually every day?

Day 19 of flower. Just defoliated. Wondering if I shouldnt cut out more branches. We will see how it looks tomorrow and decide. I am getting good light penetration even lower down. So we will see.