Likes
Comments
Share
@BB_UK
Follow
What an amazing week, my north thunderfuck is right on the second scrog (dynomyco) closely followed by candy kush express, the other 2 are on their way up to the second scrog! They’re all showing some pistols and stretching up to enter there final stages! I expect big things 💚 added a photo of my striped tomato plant! She stands at around 5ft 🙏
Likes
55
Share
Constructive interference is the phenomenon where two waves combine to form a new wave with a larger amplitude. This occurs when the peaks of one wave align with the peaks of another, and troughs align with troughs, causing their amplitudes to add together. For example, if two identical waves meet, their amplitudes will combine to produce a resultant wave with double the original amplitude. Constructive interference is a fundamental phenomenon based on the universal laws of nature, specifically the principle of superposition. 👋Top is a clean cut, no confusion for the plant, road ahead is clear, by completely removing the main growth tip, the auxin source is eliminated. The plant permanently halts vertical growth from that main stem and immediately sends its energy and hormones to the two new, evenly spaced branches just below the cut. Fimming slightly different because a small tuft of the top growth is left behind, the auxin disruption is temporary and less severe. The plant recovers more quickly and sends its energy to multiple surrounding growth points, often creating four or more new shoots from the same spot. It will eventually regain some vertical dominance after a few weeks if left to its own devices, but with a little more LST, bending the apex to the same height as the rest of the internodes, this shatters dominance, hopefully creating around 8-9 main shoots growing at equal height once recovered and grown out. Reduced environmental intensity for now and let her focus on dealing with this new stress for a week or two. When H+ ions are added to soil, the first nutrient displaced from exchange sites is typically aluminum (Al3+), if it's present, followed by calcium (Ca2+), magnesium (Mg2+), and potassium (K+), because aluminum and these base cations have different binding strengths. The order of displacement depends on the lyotropic series, where ions with a higher positive charge and those with weaker binding strengths are displaced first. The specific order of nutrient displacement is determined by the lyotropic series, which ranks the strength with which cations are adsorbed by soil particles: Al3+: Most strongly adsorbed, so if present, it will be displaced by H+ ions, leading to increased solubility of aluminum and potential plant toxicity. Ca2+: Displaced next, as it is more strongly bound than Mg2+ or K+ but less than Al3+. Mg2+ and K+: Displaced after Ca2+. The displaced nutrients can be lost from the root zone through leaching, becoming unavailable to plants. As H+ ions increase, the proportion of acid cations (H+ and Al3+) on the exchange sites increases, while base cations (Ca2+, Mg2+, K+) decrease, resulting in a lower soil pH. The amount of photosynthesis (water splitting) directly determines the availability of H+ ions (protons) in a plant. 90% of water is for cooling of photosynthetic apparatus the other 10% is split for its H+ among others things. Carbon sugars, like glucose, do oxidize in soil through a process primarily driven by microorganisms, which break down these sugars for energy. This oxidation converts the sugars into carbon dioxide (CO2) through cellular respiration, a key part of the soil carbon cycle, though some carbon may also be incorporated into soil organic matter. The rate and extent of sugar oxidation depend on factors like oxygen availability, the presence of Fe oxides, and soil redox conditions, which can all influence the process. My understanding of why we flush. Just plain water, what does it do? Strips the medium of salts and nutrients making it empty. What does that do? Triggers nutrient recycling within the plant. What's nutrient recycling? It is a natural part of plant senescence, which can be triggered once you know the switches. A 24:1 carbon-to-nitrogen ratio will also trigger. Why won't it trigger autophagy for me? Nitrogen needs to be gone, gone, gone almost. Ammoniacal (organic) nitrogen takes 4-5 times more water to separate it from soil particles than nitrates so what happens is most people jist flush the nitrates, leave all the ammoniacal in there and this prevents autophagy initiating. Nitrogen decays differently depending on its form during the dry. Ammoniacal nitrogen will oxidize in the air, leaving no trace. But nitrates do no decay and turn volatile and smelly and remain trapped until smoked, no matter how long you cure it does not oxidize. This is why you need to trigger it and begin the denitrification process prior to harvest to get rid of all the nitrates. Otherwise, you will smoke it. Flush till autophagy begins, just make sure you add no nitrogen afterwards. Micronutrients for trichomes. Don't leave the medium empty for 2 weeks, that does nothing but reduce yield 10%ish. Trichomes are another thing. Trichomes themselves are not directly affected by flushing; rather, flushing affects the plant's nutrient uptake, which influences the development and final state of the trichomes. Trichomes are filled with antioxidants in the last weeks, which is what makes them cloudy. A lot of the processing of antioxidants requires energy and nutrients (mostly micronutrients ), so you don't want that soil empty for 2 weeks, you just want the carbon nitrogen ratio 24:1and no higher. She still wants what she needs to ripen. Processing antioxidants is energy-intensive; heat and light accelerate the rate at which THC converts to CBN. This is why you lower DLI, lower temps. By doing so, you reduce the oxidative workload caused by photosynthesis, which opens up the oxidative capacity for the production of antioxidants. THC is mostly processed at night when the plant's oxidative capacity is generally moreso "free and available" for work. Oxygen is the alchemist's "fire"
Likes
18
Share
So far so good 🤘 Blumat watering system works great. No feeding other than water. Might do a little compost tea later. Le système d’arrosage automatique Blumat fonctionne nickel, pas de nutriments autre que de l’eau. On fera ptet un ptit thé de compost plus tard.
Likes
115
Share
Week 10 Marvel: Cherry Cola's Pruned Elegance and Floral Splendor Greetings, fellow cultivators! We've reached the remarkable milestone of Week 10 in the Cherry Cola Auto journey, and the tent is a painting of botanical wonders. Week 5 of the flowering stage has unveiled a need for a strategic defoliation, and our green queen has undergone a meticulous pruning process. Let's delve into the details of this transformative week. As we navigate through Week 5 of the flowering stage, the Cherry Cola Auto is a testament to the magic of autoflower cultivation. The buds are evolving, and the tent is permeated with the tantalizing aroma of a promising harvest. The journey thus far has been a delight, and the best is yet to come. In response to the flourishing canopy and to optimize light penetration, a strategic defoliation became imperative. The decision to remove excess foliage was not only about enhancing light exposure to critical bud sites but also promoting better airflow and reducing the risk of potential mold or pest issues. The defoliation process involved removing larger fan leaves, allowing the lower branches to receive their fair share of light. In addition to defoliation, a meticulous bottom cleaning ritual took place. Removing the lower, less productive growth not only redirects energy to more crucial upper buds but also eliminates potential sites for moisture retention and pest harborage. This step is crucial in maintaining a healthy, well-ventilated environment as we approach the final weeks of flowering. The defoliation and bottom cleaning were conducted with surgical precision. It's not just about removing leaves; it's a delicate dance of preserving the plant's natural grace while maximizing its potential. The result is a pruned elegance that showcases the structural beauty of Cherry Cola's budding architecture. Our nutrient regimen, with P-Boost, Topbooster, and the strategic addition of Potassium (K), continues to be the backbone of this flourishing spectacle. The phosphorus boost and organic grace provided by Topbooster, combined with the potassium magic, are orchestrating a symphony of blooming processes that bode well for the upcoming harvest. The TDS reading, now at 550, reflects the balanced nutrient environment, ensuring the plant's nutritional needs are met. Maintaining an ideal pH balance of 6.4 ensures that the nutrients are readily available to the plant. This harmony in pH contributes to optimal nutrient absorption and supports the overall health and vigor of our Cherry Cola Auto. As we prune and nurture, the tent is filled with an aroma extravaganza. Cherry Cola's terpene profile is becoming more pronounced, promising a sensory delight in the final product. The olfactory journey is a precursor to the flavors and effects that await. As Week 10 unfolds, Cherry Cola Auto stands as a pruned prelude to harvest, a testament to the meticulous care and strategic decisions throughout the journey. The mood is set for the final act, and we eagerly anticipate the culmination of this horticultural odyssey. Stay tuned, fellow enthusiasts, as the Cherry Cola Chronicles approach their grand finale! Nutrition: @aptusholland @aptus_world @aptus_ Love, Care, and Attention: @dogdoctorofficial As always, thank you all for joining me on this journey, for your love, and for it all. My horticultural odyssey would never be the same without you. Your love and support are cherished, and I feel both honored and blessed to have you in my life Friendly reminder all you see here is pure research and for educational purposes only Growers Love To you All 💚 💚 💚
Likes
10
Share
Esta semana los nutrientes siguen de la misma manera, es notorio el exceso de Nitrogeno por ende se disminuira en los próximos riegos, se realizaron podas apicales en los clones que no les hice anteriormente para que alcanzaran más altura. Dentro de esta semana instalare la malla scrog Kanovi para guiar los vigorosos brotes. Además esta semana ya esta retomando el crecimiento la planta madre variedad Tangie la cual cumplió su ciclo de propagación por esquejes y porfin florecerá. Leo comentarios, opiniones y recomendaciones
Likes
9
Share
@mheat
Follow
She is so tall...cant raise my cob anymore! Lots of sites...smells stanky!! In a good way...sort of.
Likes
17
Share
Week 1 of veg and nothing to report. Plant only on water for another few weeks. Training will start next week and maybe top if needed. I am so looking forward to this plant.
Likes
4
Share
Hola a todos ,ya desde la semana pasada que vengo regando solo con agua porque no falta mucho para el corte aproximadamente 10 días. Los cogollos no han engordado como lo que esperaba, en comparación a la misma "genética " del año pasado.Tambien he notado que el tamaño de los cogollos es menor, pero si son más compactos y más densos. Esta semana empezaron a tornarse la mayoria de los cogollos en un tono purpura, como así también algunas hojas, también indicadores de que el final ya se aproxima, a todo esto hay que sumarle el descenso de la temperatura también es un factor para que los cogollos y hojas se pongan de ese color. Así que de aquí a que llegue el día del corte solo regare con agua.
Processing
Likes
2
Share
@Hexus
Follow
Days 78-84 - Been lax in updates, but I still log every week to completion. Back injury in addition to The Nineteen, Rona Style, has been a bit of a pain in the posterior. (That means ass) Plants are gigantic and sassy. Had Dangergirl come out and defoliate/lollipop the bottoms out of the girls, saving me painful labor and increasing my yields, so yay for her! Plants are happy, pompoms are getting thick, and everything looks good. Switched FF01 to flower on day 84.
Likes
1
Share
Likes
Comments
Share
PLANTED HER TODAY (24/07) 🙂 FOLLOW FOR THE JOURNEY GROWMIES ?👊 Beyond10gs socials: * Instagram: @beyond10gs * TikTok: @10gsbeyond * YouTube: @10gsbeyond * Snapchat: beyond10gs * X (Twitter): @Beyond10gs * Discord: https://discord.gg/Dx9RMUdrx
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
11
Share
Tag 42 - Ende der 6. Woche. Der Stretch ist beendet und die Pflanze konzentriert sich auf die Buds. Deshalb habe ich in dieser Woche den Dünger etwas erhöht und die Menge an Litern die ich gieße. Ich bin gespannt wie sie sich in der nächsten Woche entwickelt. An Tag 36 wurde die Pflanze gedüngt. Nährstofflösung: 2 ml/l - Voodoo Juice Advanced Nutrients. 4 ml/l - pH Perfect Sensi Bloom Part A 4 ml/l - pH Perfect Sensi Bloom Part B 2 ml/l - Bud Candy Advanced Nutrients. 2 ml/l - Big Bud Advanced Nutrients. Davon hat die Pflanze 1l an Tag 36 erhalten.
Likes
Comments
Share
Here we go into week 2 looking happy as ever everything seems on point 🤞
Likes
26
Share
had to do a long veg and clone a lot whole cos I couldn't flower. glad I had all photoperiod plants and gave me lots of time to work on environmen. flower commenced. let's get it. grrrr
Processing
Likes
10
Share
Nice colas popping up showing to see the hard work pays off
Likes
3
Share
De belle couleur violette commence à arriver ! Ça va fair de belle Bud avec des reflets violets 👌🌱❤️ et l'odeur devient de plus en plus forte et appétissante 🤤 hâte de récolter😅