Que maravilha, desejo-te sorte no teu cultivo :)
E no final uma boa colheita
likes 3
By continuing to use the website or clicking Accept you consent to our cookies and personal data policy. For details please see Privacy Policy
Accept
micro zkittlez grow
Follow
4Indoor
Room Type
FIMing
weeks 3
Topping
weeks 4
LST
weeks 4-5
Defoliation
weeks 5
85%
Soil
Grow medium
15%
Perlite
Grow medium
5.5 l
Pot Size
Grow Conditions
Week 3
Vegetation
10
cm
inch
Height
18 hrs
Light Schedule
10+ conditions after
Login
Grow Technique Usage
FIMing
Technique
Commented by
martiniii4 years ago
Growing nicely, I decided to FIM her after all, waiting for her to recover. Started using nutrients, will see how she reacts. She is starting to have nice smell, will need to change my fan and add carbon filter.
Added carbon filter I made from 100mm to 125mm pipe reducer, used active carbon around 35mm thick layer in the wider part of the reducer, for the carbon not to spill out I used carbon filter, normally used in vacuums or so. Inserted it on top of tent, so computer fan is blowing into it. I am quite amazed, because it works just with the computer fan, the temps are higher around 27°C, but I can change the speed of the fan if I wanted. So will not need to change the fan in the end. Also changed my layout a bit, so I gained 3cm for her to grow in.
happy growing
likes
3Similar Diaries
9 weeks
Sweet Zenzation XL AuTO (SWS100,CURATI_DA_SOLO
Sweet Zenzation XL Auto2 years ago · 14 comments
6 weeks
Tropicanna poison XL Auto (SWS95)CURATI_DA_SOLOTropicanna Poison XL Auto2 years ago · 13 comments
7 weeks
Skywalker OG Runtz XL AuTO (SWS97)CURATI_DA_SOLOSkywalker OG Runtz XL Auto 2 years ago · 8 comments
Grow Questions
martiniiistarted grow question 3 years ago
Hello guys, I just want to ask If I had done fimming of my plant right? She looks like she is growing normally(chrismas tree shape), I don´t think she is going to split the top into two more colas. Dont know if I have to try one more time, or to top her. Thanks
Solved
Techniques. FIMing
like
InspireMeanswered grow question 3 years ago
Looks like you may have cut the two side shoots a bit and didnt fully top her leaving a small amount of leaf to continue to grow on the top and the 2 sides.
Also I'm noticing some leaf curl. The way its curling suggests some light issue. I back the lights off a little.
martiniiistarted grow question 3 years ago
I have a question about my LST, my first, so if you have any advice. I want to do basically SCROG, with 6 branches and the two from topping. Do you think her first two branches will be able to get to the top? They are not growing much,thinking about lollipoping them before flower
Solved
Techniques. LST
Techniques. ScrOG
like
Pemidaisyanswered grow question 3 years ago
Yes on the right the track @martiniiii. They will eventually grow and reach the top, but to add LST is not a once off thing. Continuous tweaking is required. To get an even canopy you’ll probably need to LST the tops so they don’t outgrow the lower branches as well.
Looks like those fan leaves are covering the two bottom branches, try tucking the fans out the way so those can get direct light and you’ll start see the difference.
martiniiistarted grow question 3 years ago
Her leaves started to yellow, probably because she was dried out for one day, so I watered her properly with 1.5l with 5ml of biocanna flores(first time). After 3days I would expect her to be dry again, but the soil is still quite moist. Why is she drinking a bit less?
Solved
Leaves. Color - Yellow
like
Hashyanswered grow question 3 years ago
Hi the reason it's taking a long time for your soil to dry is because of your grow space, its very small and is holding to much humidity in there, 75% I think you said. I haven't used your flower nutrient before but 5ml for 1.5L sounds quite high, like I said I haven't used it so don't know what the doses should be. So long as your getting run off and using correct ph and doses of nutes you will be fine. Just lower that humidity, 50% to 60% RH would be better.
martiniiistarted grow question 3 years ago
How long do you think till cultivation? Stigmas started to turn brown. When should I start flushing my plant when I´m using only organic fertilizers?
And how bad it´s to have humidity around 80% when flowering? I´m worried about mold.
Solved
Plant. Other
like
InspireMeanswered grow question 3 years ago
Hi mate, I'd say you've got another 3 or 4 weeks left yet.
In regards to humidity, 80% is very high for flower. You want to be at around 40%. You should be thinking about increasing your tents air exchange, this can be achieved by using a bigger exhaust fan or you may even need a dehumidifier.
When your humidity is that high you run the risk of bud rot. I'd get some fans inside blowing air around your canopy and look at getting that humidity down mate.
Hope this helps 🙂
martiniiistarted grow question 3 years ago
How long do you think till harvest? Trichomes are still all clear. And should I start flushing her? Today I watered her and I was thinking about this as the last time with nutrients, or is it too soon? Thanks
Solved
Buds. Other
Other. Harvest - Drying
like
Burmeseanswered grow question 3 years ago
Hi there,Normally flowering period will take at least 8weeks and your plant still have white pistils.Wait until most of them are turning into orange and check trichomes colour on buds(calyx) not on sugar leaves.If trichomes are mostly milky/cloudy about 80/90 % and fill with some amber colour, it’s the time to harvest.It's also a good pratice to do proper flushing one week before harvest.Happy growing... ✌️
martiniiistarted grow question 3 years ago
I was away for 2 weeks and during that time my friend was watering her. When I came back all of her leaves were dry and she doesnt look good. My biggest concern is if it has something to do with mold. I think I see only a bit of mold on one bud. And can I start drying her?
Solved
Buds. Other
Leaves. Other
like
Organomananswered grow question 3 years ago
I would be harvesting asap, before the plant dies completely.
Mould will be mushy and soft, you will know when you see it, (as it is quite obvious when you do see it), and cut it all off and throw it in the garbage, as it is not safe to consume or use mouldy buds in any way.
The issue with this plant was not caused by mould, it is just an over ripe plant knocking on deaths' door.
Hope this helps, Organoman.
Comments
Show by Week
Sort by
popularity
popularity
newest
oldest
Grow3rPTcommentedweek 14 years ago
martiniiicommented4 years ago
@Grow3rPT, thanks, will try to make her beauty
like 1
Ferenccommentedweek 103 years ago
Enjoy @martiniii
likes 3
Ferenccommentedweek 73 years ago
Nice 👌 @martiniii
likes 3
Vincent_Van_Groghcommentedweek 14 years ago
Sending the best of vibes to you and your plant/s. Enjoy the mutual growth you will have together! 🌱
likes 3
weed__meecommentedweek 33 years ago
I wish you a great growth 😊🍀🌱🌷
likes 2
martiniiicommented3 years ago
@weed__mee, thanks, I wish the same to you too.
likes 2
InspireMecommentedweek 73 years ago
Good luck with your grow mate 👌🙂
likes 2
Lacrimacommentedweek 14 years ago
Happy Growing ! 😊💪
likes 2
rrollycommentedweek 83 years ago
Looking nice Mate! She is so close to the lamp!😂
like 1
rrollycommented3 years ago
@martiniii, yeah i was afraid of it too :D Hopefully she wont get burned 🙏
like 1
martiniiicommented3 years ago
@rrolly, Thanks 😊 Yes she is not even a centimeter from the lamp. When I started growing in this tent I was worried of this because of the plant getting burned from the light, but she seems she is not worried and is happily growing towards the light. In 1 week she probably will be touching the light.
like 1
DoDrugs420commentedweek 103 years ago
Zkittlez Auto is exactly what my momma would've wanted me to have.
like 1
DevilsBudcommentedweek 63 years ago
Good luck with your grow 💪💪
like 1
JERJERAcommentedweek 53 years ago
How wonderful
I hope a good development 🌱👍
Go through my diary and leave your opinion .
like 1
SegaYGriegacommentedweek 43 years ago
Great job, looks great !!! I wish you a great harvest👍 watch my reports and leave your opinion in the comments😉
like 1
DreamITcommentedweek 33 years ago
Enjoy growth mate 🦄👍🍀
like 1
rrollycommentedweek 43 years ago
Looking nice Mate! I also have 1 fan only in my Q30, I use it on the top as an exhaust fan, and I leave the bottom of the back open, so new cold fresh air comes in at the back and goes all the way up through the plant, bringing the heat from the LEDs out as well. Temp is only 1-2 degrees more than room temperature. 👍 In my first run I used my fan as an intake, but this with negative airflow is much better, and humidity is also much better, I can keep it between 40-50%. Good luck! 😁
like
rrollycommented3 years ago
@martiniii, yeah bro I had the same problem, wanted to add carbon filter just like You, and I also failed. I don't run any filter now, the tent is just simply too small to put a decent one in, and still did not find any well performing solution, so I just stick with no filter and keep the windows open in the room 😅
like 1
martiniiicommented3 years ago
@rrolly, Hi, sounds nice. I also didn't have any problems with temps and humidity until I started trying to get rid of the smell. How do you get rid of smell? Do you use any carbon filter? It's nice to have someone to talk to, with experience with this tent.
like 1