Wedding glue by fast buds. 1st grow

Your grow is looking proper to me. just a few suggestions if they are possible. I would try and lower the temps a bit during the day and night. Max 26c/78.8f day max 18c/64.4f night. I'd also lower the temperature of solution your feeding to 18-21c/64.4-69.8f You will want to invest in the TDS pen that can read EC/PPM when using liquid feed, it will be a helpful diagnostic tool if things get a little weird. Other then that your on track for a great grow. GH nutes are a good set as well. lots of options there. Keep us posted on how everything goes in your diary. The community here is quite helpful at times. Happy Growing!

Mutation very strange, hard to see, but it looks like plant definitely toped himself, this auto has potential to be the best or the worst ;))) treat her normally, don't top or harm, bend her to expose side branches after 7-10 days, wen she will get what to bent and what to expose ;) Autos are short-lived and I honestly see 90 %of fails while trying to train them heavy than any success. To me it looks that people would have always 2 ounces from a plant without any, but they keep training stupidly and get an ounce. Yes, maybe plant looks funky, maybe those few branches without even last few leaves are looking great in photos, but it is still a pitty result in most trained auto plant diaries. I have itchy fingers too, constantly want to improve or upgrade something, but it took me time to understand how plants behave in certain conditions, what will be aftermath of my actions and etc. Less is more , that rule should be engraved above every entry to grow room ;))) All the Best !!!

When they start showing you it's a girl like she is now then that's a sign she will soon be going into flower.

I've not yet SCROG on autos. They tend to flower whenever they want and my understanding is that you need to control the switch to flower to fully utilize SCROG. When they stretch up into it, just thread them in the mesh till flower and then let them go. I'd also strip the lower branches and bud sites so they focus on the main ones if it was going to do it. However I don't think I would SCROG on autos. Good Luck!

Specific to you’re grow.. I would not defoliate. If you wanna take some of the lower growth off each branch that can be helpful to not waste plants energy on that growth. Just make sure your environment is on point. Look up VPD charts and try to stay in the sweet spot depending on temp and RH. Reference your lights par map and make sure you’re getting plenty of light but not overdoing it. I’d go for around 6-800 umols at the canopy if your at 18/6 light cycle

That's flowering mate ;))) It's ok to train your plant through all grow cycle ... Just do all training applications straight before watering, less broken branches ;)) All the Best !!!

1600 TDS on an auto?? Tone it back. max 900PPM if the plant can take it. most can't. best to lower it down to 600-650ppm. once you go over 900PPFD in light for cannabis you need to supplement CO2 I would aim for 700-800ppfd in peak flower on the canopy and bend that one cola down to match its height. again not all plants like this much and you will need to watch for signs of light burning. Your temps are looking great BTW. RH is ok for now. Will want it in the 40's when you get into weak 7 and onward. Let me know if you need anything else. Good Luck and Happy Growing!

I’m not seeing any bleaching so tbh they’re not gonna be lost. If you can raise your lights a few more inches they should be good since I think your stretch is over. Currently my plants have a couple branches within 8-10 inches of my light and I am not seeing any adverse affects. Just watch your daytime temp along with light distance so that the leaf temp doesn’t get too high on the close buds.

Your diary is looking good and so are the plants! I did notice one thing though that maybe your want to try. When growing in hydro its good practice to raise the PH up to 6.2-6.3 in flower and keep your EC from spiking to much with an autos. They dislike strong feeds. I would be careful not to blindly spike P and K nutrients like suggested below with out keeping your EC in check. If its not monitored that can cause other issues. this is a good reference point for auto feeding strengths. its not 100% and you will need to adjust if you plants are showing signs of wanting more or less. https://www.autoflower.net/forums/threads/med-man-method-feeding-chart-ppm-ec.47856/ Best Of Luck and Happy Growing!

How is your PH getting that low. If it's from the run-off then it's simple. That isn't a true reading. If you aren't making a mix then say add too much of one nute over another, say 100ml of 1 300ml of another well, the PH of that 300ml will effect the PH/PPM of the other reading, only real results that you can count on from run-off if is when being applied they are all mixed and after that pour to the tests. And I'd flush your sub after a few days of feeds to get the salts out and avoid nute lockout. If you read my PPM for my zkittlez hydro it was 8500 and I thought that had to be wrong, but my friends much better PPM gave 8550. And no way was I giving them that the highest was 1400 it was a thing of me not changing the run-off for over 2 weeks and roots were drinking from the plate but clearly there was nute lockout and was only taking up mostly water, I'm putting this down to some advice I got to add a higher PPM and I broke my routine of just adding my mix and too much of 2 nutes locked out my whole mix, I just caught it in time. As my plant was starting to get very light green and starting showing slight signs of 'the claw"

You have 2 to 3 weeks depending on your desired ripeness of trichromes. Best is to aquire a jeweler's loupe that has a 60x magnification and light. They are inexpensive. Look at trichromes on buds not leaves. Ideal for my harvest is about 75 to 85 percent cloudy trichromes with rest amber. Plant will ripen from top down in trichromes color. Best to look at several spots when deciding. Another way is when mass of white pistils are brown or orange. Then it is about 2 weeks from then. Harvesting early is a very common mistake. Enjoy the harvest soon.🌱

ok, I can tell you straight away that the bud in green is nowhere ready. You must look for a consistent cloudy set of trichomes all over the plant and bud sites. Check the flowers with a lens or portable microscope. the more clear trichomes you will see the longer you will need to wait. I may be wrong, but I think you pulled the trigger a bit early.