yan420 Hey growmies this is a new project which I would like for you to take part as well with ideas and suggestions, keep in mind that I live in Berlin Germany, I'm not saying it's out of the question to order things from outside the EU but it has to be dirt cheap for me to take into consideration.
I'll be updating whenever as this ain't a grow diary, nothing is set in stone...
29 likes
10 comments
Share
1
Week 1. Vegetation
10mo ago
1/5
500 cm
Height
24 hrs
Light Schedule
50 °C
Day Air Temp
14.0
pH
2500 PPM
TDS
100 %
Air Humidity
50 °C
Solution Temp
50 °C
Substrate Temp
50 °C
Night Air Temp
300 liters
Pot Size
30 liters
Watering Volume
200 cm
Lamp Distance
2500 PPM
CO₂ Level
yan420 Prices are more or less and not exact values except for the grade A US parts which will be bought from a "proper" Rosin website if I choose the option of course.
Option A
1) Hydraulic workshop press 20 tons https://www.ebay.de/itm/352298211492?mkcid=16&mkevt=1&mkrid=707-127634-2357-0&ssspo=5uinFjAIRrK&sssrc=4429486&ssuid=Guk3W1TrRSK&var=621693331255&widget_ver=artemis&media=COPY
1x200€
2) Cheap Kolophonium heating plates.
https://www.ebay.de/itm/405412835542?mkcid=16&mkevt=1&mkrid=707-127634-2357-0&ssspo=xikj_oe1rjm&sssrc=4429486&ssuid=Guk3W1TrRSK&var=&widget_ver=artemis&media=COPY
2x120€ = 250€
3) Rubber anti vibration mat for the base.
0€ have one laying around
Tools needed (open for suggestions)
1) angle grinder to cut off the nob under the jack as the cheap heating plates don't have a mounting option, and to shorten the press if possible.
2) drill to make holes for new screws to reattach the base/feet of the press.
3) heat resistant glue to Glue the heating plates directly on the frame with insulation properties if possible, if not I'll just have to use a separate product or go with out, not ideal but doable.
Option B same as option A only difference are the heating plates which are pre manufactured for the purpose
1x200€
https://dulytek.com/products/dulytek-retrofit-rosin-heat-caged-plate-kit-3-x-8-inches-for-15-30-ton-shop-presses
309$ plus import taxes so around 400$ if I'm lucky 🤞🍀
Option C will probably be my running setup until I get the rest for option A or B
1) cheap 5ton Rosin press
300€ 0€ really as I already have it
2)8 or 10 ton jack to replace the 5 ton that came with the original.
25€ to 80€
Tools needed.
1) drill to reattach the new jack
31 likes
6 comments
Share
Used techniques
???
Technique
2
Week 2. Vegetation
10mo ago
1/5
500 cm
Height
24 hrs
Light Schedule
50 °C
Day Air Temp
14.0
pH
2500 PPM
TDS
100 %
Air Humidity
50 °C
Solution Temp
50 °C
Substrate Temp
50 °C
Night Air Temp
300 liters
Pot Size
30 liters
Watering Volume
200 cm
Lamp Distance
2500 PPM
CO₂ Level
yan420 16.02.25
A small update regarding my future build, seems that Option B is out of the question as I'm not willing to risk paying the tariffs that could change any moment now in the USA, so I'll be sticking with the cheap Chinese heating plates and controllers, so option A and C are the ones im going for.
Option C I'll be doing in the next 4 to 6 weeks in time with my Candy Cream harvest.
Option A will take a while as I'm still looking around.
Prices are more or less and not exact values except for the grade A US parts which will be bought from a "proper" Rosin website if I choose the option of course.
Option A
1) Hydraulic workshop press 20 tons https://www.ebay.de/itm/352298211492?mkcid=16&mkevt=1&mkrid=707-127634-2357-0&ssspo=5uinFjAIRrK&sssrc=4429486&ssuid=Guk3W1TrRSK&var=621693331255&widget_ver=artemis&media=COPY
1x200€
2) Cheap Kolophonium heating plates.
https://www.ebay.de/itm/405412835542?mkcid=16&mkevt=1&mkrid=707-127634-2357-0&ssspo=xikj_oe1rjm&sssrc=4429486&ssuid=Guk3W1TrRSK&var=&widget_ver=artemis&media=COPY
2x120€ = 250€
3) Rubber anti vibration mat for the base.
0€ have one laying around
Tools needed (open for suggestions)
1) angle grinder to cut off the nob under the jack as the cheap heating plates don't have a mounting option, and to shorten the press if possible.
2) drill to make holes for new screws to reattach the base/feet of the press.
3) heat resistant glue to Glue the heating plates directly on the frame with insulation properties if possible, if not I'll just have to use a separate product or go with out, not ideal but doable.
16.02.25
🚫🚫 Option B out of the question 😭 ⁉️🚫🚫
🚫🚫Option B same as option A only difference are the heating plates which are pre manufactured for the purpose
1x200€
https://dulytek.com/products/dulytek-retrofit-rosin-heat-caged-plate-kit-3-x-8-inches-for-15-30-ton-shop-presses
309$ plus import taxes so around 400$ if I'm lucky 🚫🚫
Option C will probably be my running setup until I get the rest for option A or B
1) cheap 5ton Rosin press
300€ 0€ really as I already have it
2)8 or 10 ton jack to replace the 5 ton that came with the original.
25€ to 80€
Tools needed.
1) drill to reattach the new jack
@Mr_und_Ms_Lue_Roots, Dankeschön meine lieben, aber ich hatte keine ernte lol, ich habe nur das Tagebuch geschlossen weil ich es mir anders entschieden habe.
✌️♥️
