1.Bonsai: Lemon Cherry Runtz✌️

tsf_homegrow She's doing well; soon she'll be carefully lifted from the soil and then placed on a small sculpture and into her bonsai pot. When the time comes, we'll have to keep our fingers crossed that she survives the process.

tsf_homegrow 11.28. It's definitely growing again after the intervention... I'll let it grow a little more on its own, then add a new wire to keep it in shape. The lower shoots will also be removed since they're not needed. Until then, happy growing! 💛✌️ 11.23. - 1:45 PM Fingers crossed she survives. And sorry for the bad photos, they're screenshots from a video and I wasn't paying attention to getting the angle right the whole time. The roots were completely exposed, and a few were damaged in the process. What you see in the photos I placed over the sculpture and covered it with soil again. 9:15 PM She seems to have survived better than I expected. She's already standing upright again. 😂

tsf_homegrow 12.6. Watered, removed the lowest leaves and the one that would be pointing downwards. Re-wound the wire so it has more space. 12.5. Only took photos :) 12.3. Added a new wire to stabilize the lower stem/root on the sculpture. 11.30. I removed the bottom four shoots and a leaf that was stuck between the top and the stem. (It's hard to describe which one I mean, but you can see it in the photos.) Otherwise, she is doing quite well, even though the stem seems thinner at the bottom than the parts that were recently grown. I hope it will thicken up a bit more over time and become more stable on its own, because she still has a little trouble standing upright. The main shoot tends to lean to the left or right. Now it will just grow sideways over the pot until it reaches the other side. 💛✌️

tsf_homegrow 🇩🇪 10.12. New wires were installed to keep the little one in shape and straighten it out a bit. Happy growing! 💛✌️ 9.12. Yesterday I loosened the wire at the bottom of the trunk and attached new wires. I recorded the video today. It's a 360-degree view. 7.12. I installed another wire, this time with a piece of rubber, to keep the shoot at the correct height and avoid leaving a pressure mark.

tsf_homegrow 12.14. New week, new look :) I removed two upward-facing fan leaves so the four side shoots could get some light. I've been readjusting the wires a few times over the last couple of days. And a few days ago, I added two "anchors" to the stem to keep the plant in place. The tension on the other side had caused it to start bending more. Otherwise, it's doing quite well; things are more or less going according to plan. Happy Growing💛✌️

tsf_homegrow 12.26. I exposed part of the roots and re-routed all the wires. I had loosened them all beforehand to get better access to the soil. 12.23. Removed the lowest leaves and exposed the shoots. The little ones now have enough leaves of their own to continue growing. From now on, the main shoot will grow back in an arc over itself. 💛✌️ 12.21. Still going according to plan.

tsf_homegrow I removed some leaves and inserted a wire as a trellis to guide the main stem back onto it, which now gives a glimpse of the planned final shape. Otherwise, the soil is well-rooted; you can already see the roots sprouting out of the ground. The sculpture is also well entwined, and I'm still curious to see if the roots have overgrown it as planned. Or if, due to the plant shifting at the beginning, they're now positioned differently than intended. The suspense will last another week or two until I expose the next section of roots.🤩💛✌️

tsf_homegrow I got curious and decided after a week to remove some of the remaining soil and the edge of the Airpot to see how the roots were doing in that area. And indeed, more or less as planned, and in the end, due to the plants shifting above the soil, it wasn't quite perfect, as expected, but I'm still very happy with it for the first attempt. Even though the root doesn't stretch from fingertip to fingertip and the stem has grown upwards instead of sideways, she still turned out very well and can now recover for a while and will only need occasional trimming. Happy growing! 💛✌️

tsf_homegrow 12.1.- Day 64

tsf_homegrow We’ve been a bit off track the last few days. She was drooping a little because I hadn't been watering her properly. I've exposed a small section of the roots and kept her in shape. I've decided to allow four more side shoots to develop at the top of the main stem. And then it will slowly be time to start thinking about putting her into flowering mode. But she can continue to grow for a few more weeks. Happy growing! 💛✌️

tsf_homegrow 31.1. I've shaped it again and removed some shoots. Over the next few weeks, I'll try to get all the shoots to the same height. And I'll probably need to increase the fertilizer dose a bit; some deficiencies are slowly becoming apparent. But that should sort itself out over time. Happy growing💛✌️

tsf_homegrow 🇬🇧 2.9. Still keeping her in shape. The video was filmed before leaf removal and adjusting. Tonight I'll remove the lower leaves that are hidden by the ones growing above and reposition the shoots. A few photos will follow. 💛✌️ I've done my first photoshoot for the Fast Buds Pets & Pot 2026 contest. 2 out of 33 turned out pretty okay. But I'll have a few more attempts this week. I'm already in! 😂💛✌️

tsf_homegrow 2.14. Day 97, She's still doing okay, though it could be better here and there. I watered her a few times too late, which is why her leaves drooped quite a bit twice. She just needs to hold out for a few more weeks before she starts flowering. Happy growing! 💛✌️

tsf_homegrow Bla

tsf_homegrow 🇩🇪 26.2. Tag 109 sie macht sich ganz gut. Weiterhin alles noch etwas auf eine Höhe bringen und irgendwie in Form halten. Ich hab mich inzwischen dazu entscheiden, wenn sie in Blüte geht, lass ich die Trieben mit den Blüten gerade nach oben wachsen. dafür müssen alle auf etwas Abstand zu einander, damit sich die Buds später nicht gegenseitig berühren und alle Triebe genug Platz haben. Wir werden sehen wie gut das klappt. Happy growing💛✌️ 🇬🇧 2.26. Day 109: She's doing quite well. I'll continue to even everything out a bit and keep it in shape. I've decided that when she starts flowering, I'll let the shoots with the flowers grow straight upwards. For this to work, they all need to be spaced a bit apart so the buds don't touch each other later and all the shoots have enough room. We'll see how well that works. Happy growing! 💛✌️

tsf_homegrow 5.3. Tag 116 sie bekommt noch 1-2 Wochen und dann geht’s in die Blüte. Die Triebe werden in der Zeit weiterhin auseinander gehalten. Und versucht die aktuelle Form bei zu behalten. Den Haupttrieb und die zwei ersten Seitentriebe werde ich zurückführen damit diese vorne den anderen Armen nicht ich weg sind. Happy growing.💛✌️

tsf_homegrow Bla

tsf_homegrow Tag 127 you can see that she hasn't been optimally taken care of here and there over time, but she's still doing well, and by the end of the week, or at the latest by the end of next week, she'll finally go into flowering. Until then, it's about keeping her in shape; the lower shoots can slowly grow upwards, and the three that I'm training "back" will continue to be guided along the wire. With a bit of luck, they should be at the same height by the time we switch to flowering. Happy growing💛✌️

tsf_homegrow Day 133: The shoots are getting closer and closer to the same height. Otherwise, she is doing quite well; the higher dose of nutrients seems to be doing her good. Next week she can start to flower. Happy growing! 💛✌️

tsf_homegrow After a long wait, it's finally time for the bonsai lady to bloom. I'm going to try to keep her a bit shorter, but in the end, I'll just let her grow straight up towards the lamp. 💛✌️

tsf_homegrow 6.3. / Tag 148 / BT 8 - she's doing a bit better again, we've entered the stretch phase a few days ago. Now it's time to wait until we're done with that and then do some defoliation.

tsf_homegrow 13.4. We're in stretch and I have to water them daily with 400-500ml.💛✌️

tsf_homegrow It's going.

tsf_homegrow She's doing well.

tsf_homegrow The week went well, mixing 500ml every evening for the little one and watering, nothing else to do. By the end of the week, it started getting so heavy that she can't carry them herself anymore. I'll make something at the beginning of next week so she doesn't tip over too much.

tsf_homegrow Off to the new week! On Monday evening, I added a few copper wires to pull the main stem and the one heavily drooping branch in the corner back into shape.

tsf_homegrow 24.5. The days have passed, and the headbud was once leaning against the tent wall since it's too heavy for it to hold itself up now. As a temporary solution, I tied it with a nylon thread to a pole at the top of the tent. On Pentecost Sunday, I wrapped more wires around the stems to stabilize the buds. Now they are standing on their own again and hopefully will hold until the harvest without threads. I’d like to put them on the turntable again to film a 360 view. Happy growing💛✌️ 20.5. The buds are getting heavier… 18.5. Beginning of the next week. There was another 500ml.

tsf_homegrow 28.5. The wires are holding as hoped. From today on, there’s only pH-adjusted water. 25.5. New week, everything is the same. She still needs a while; the buds seem to be holding up with the wires for now. Happy growing 💛✌️

tsf_homegrow 3.6. Tag 206 BT 66 - the week is already halfway through... She's looking good, the upper buds have gotten really heavy and the lower ones are also looking nice. About 1.5 weeks left and then she'll be ready.

tsf_homegrow 8.6. She's making all the buds magnificent, they are getting firmer and heavier. However, she still needs about another week. Happy growing 💛✌️

tsf_homegrow 15.6. - Day 218/BT 78 - the last days are counted. This week she will be harvested, it has been a beautiful little journey with the Bonsai Lady. I will definitely start a few more Bonsais in the future, but for now, a few regular grows are on the agenda. Because after the grow is before the grow. Next up are 2x Z42 from Fastbuds, joined by a Papayton p1. Happy growing💛✌️

tsf_homegrow 17.6. First smoke test in 14 days.💛✌️