Amnesia Z Auto (FastBuds), 30x30x60, 50W

Spy420 Week 2 has begun 12.07.25 - 8 day, the plant continues to gain weight after a slight slowdown. But it seems I gave the compote a strong 480 ppm last time 12.07.25 - 8 day: day off from watering 12.08.25 - 9 day: 150 ml, 5.8 pH 340 ppm Cal Mag 0.4 ml/l 12.09.25 - 10 day: 150 ml, 5.8 pH 300 ppm Cal Mag 0.4 ml/l 12.10.25 - 11 day: 200 ml, 5.8 pH 380 ppm (but I added an additional 100 ml of water to this compote to increase the ph (I ordered ph up, I didn’t have it) and the final solution turned out to be 340 ppm Cal-Mag 0.3 ml/l Micro 0.2 ml Grow 0.2 ml Bloom 0.1 ml 12.11.25 - 12 day: 200 ml, ~6.2 pH 340 ppm, same compote as yesterday. The calibration of the pH meter has been lost, I ordered calibration solutions, so far the pH is approximate 12.12.25 - 13 day: 200 ml, ~6.2 pH 410 ppm, same compote as yesterday, but a little stronger. pH is approximate 12.13.25 - 14 day: 250 ml, ~6.2 pH 460 ppm, pH is approximate. Cal-Mag 0.4 ml/l Micro 0.25ml Grow 0.25 ml Bloom 0.15 ml The plant continues to gain weight, the second week has come to an end😀

Spy420 Week 3 has begun 😃 12.14.25 - 15 day: 250 ml, 5.8 pH 490 ppm. I calibrated the pH meter, now the pH values ​​are accurate Cal-Mag 0.4 ml/l Micro 0.3 ml Grow 0.3 ml Bloom 0.2 ml 12.15.25 - 16 day: 250 ml, 5.8 pH 500 ppm Same compote as yesterday 12.16.25 - 17 day: 250 ml, 5.8 pH 500 ppm Same compote as yesterday 12.17.25 - 18 day: 250 ml, 5.8 pH 500 ppm Same compote as yesterday 12.18.25 - 19 day: 250 ml, 5.8 pH 560 ppm. Today I started training the plant using the LST technique. The plan is to create a spiral shape from the main stem😁 Cal-Mag 0.45 ml/l Micro 0.35 ml Grow 0.35 ml Bloom 0.25 ml Same compote as yesterday, but a little bit stronger 12.19.25 - 20 day: 500 ml, 5.8 pH 560 ppm Same compote as yesterday 12.20.25 - 21 day: 600 ml, 5.5 pH 510 ppm Same compote as yesterday. Still waiting for the рH up to arrive

Spy420 Week 4 has begun 😎 Overall, everything is going well, the plant continues to gain weight, the LST training is proceeding as planned, and I managed to keep the plant at a height of 6 cm 12.21.25 - 22 day: 500 ml, 5.8 pH 540 ppm Cal-Mag 0.45 ml/l Micro 0.35 ml Grow 0.35 ml Bloom 0.25 ml 12.22.25 - 23 day: 1000 ml, 5.8 pH 510 ppm Same compote as yesterday 12.23.25 - 24 day: 1000 ml, 5.8 pH 520 ppm Same compote as yesterday 12.24.25 - 25 day: 700 ml, 5.8 pH 550 ppm Same compote as yesterday, but a little bit stronger. I did a light defoliation, removing a total of 5 leaves that were in the way. I also measured the drainage, which was 1570 ppm. I'll use a weak Flora Kleen solution for the next watering to lower ppm of the drainage. 12.25.25 - 26 day: 2000 ml, 5.8 pH 200 ppm I watered it twice with a Flora Kleen solution, with a dosage of 1.5 ml/l. The final drainage was about 800 ppm 12.26.25 - 27 day: 1000 ml, 5.8 pH 520 ppm Cal-Mag 0.45 ml/l Micro 0.35 ml Grow 0.35 ml Bloom 0.25 ml 12.27.25 - 28 day: 1000 ml, 5.8 pH 530 ppm Same compote as yesterday.

Spy420 Week 5 has begun 😌 Overall, everything is going well. The plant has now returned to normal feeding after the salt buildup, and the drainage water now shows 600-700 ppm after watering the compote. I continue to perform LST training and some defoliation. During the training process, 3 colas from secondary stems were lost 12.28.25 - 29 day: 1000 ml, 5.8 pH 530 ppm Cal-Mag 0.45 ml/l Micro 0.35 ml Grow 0.35 ml Bloom 0.25 ml 12.29.25 - 30 day: 1000 ml, 5.8 pH 580 ppm Cal-Mag 0.3 ml/l Micro 0.5 ml Grow 0.6 ml Bloom 0.3 ml 12.30.25 - 31 day: 1000 ml, 5.8 pH 840 ppm. I realized I was giving the plant a critically low dose of basic fertilizer. I was so afraid of overfeeding that I actually underfed it 😕. I'm increasing the dose of basic fertilizer. The plant has also started to flower, and some pistils are appearing. After training the plant, my fingers smell sweet with the aroma of mango and papaya 😋 I also wish everyone a Happy New Year 🙌. I wish you healthy and beautiful plants, and may they bring you only positive emotions 😺 Cal-Mag 0.1 ml/l Micro 1 ml Grow 1.5 ml Bloom 0.5 ml 12.31.25 - 32 day: 1000 ml, 5.8 pH 730 ppm. Same compote as yesterday 01.01.26 - 33 day: 1000 ml, 5.8 pH 800 ppm. Same compote as yesterday 01.02.26 - 33 day: 1000 ml, 5.8 pH 1160 ppm. Cal-Mag 0.2 ml/l Micro 1.5 ml Grow 1.5 ml Bloom 1.5 ml 01.03.26 - 34 day: 1000 ml, 6.0 pH 1160 ppm. Same compote as yesterday

Spy420 Week 6 has begun 😊 01.04.26 - 36 day: 1000 ml, 6.0 pH 1240 ppm. Cal-Mag 0.2 ml/l Micro 1.6 ml Grow 1.4 ml Bloom 1.8 ml 01.05.26 - 37 day: 1000 ml, 6.0 pH 1240 ppm. Same compote as yesterday 01.06.26 - 38 day: 1000 ml, 6.0 pH 1240 ppm. Same compote as yesterday 01.07.26 - 39 day: 1000 ml, 6.0 pH 1210 ppm. Cal-Mag 0.2 ml/l Micro 1.4 ml Grow 1.4 ml Bloom 1.8 ml 01.08.26 - 40 day: 1000 ml, 6.0 pH 1230 ppm. Same compote as yesterday 01.09.26 - 41 day: 1000 ml, 6.0 pH 1270 ppm. Same compote as yesterday I'm facing a troubling situation: during the day, the temperature in the grow box is 21-23 degrees Celsius, but at night it drops to 15-16 degrees. Humidity is 60-65% during the day and 70-75% at night. The room where the grow box is located is currently cool, 17-20 degrees. The coco coir is mostly always moist, as I water it every day. Today I discovered that the fabric pot is covered in a white, mold-like coating, and the surface of the coco coir also has a white coating, and in some places it's clearly mold. The plant looks healthy and continues to grow every day. 😕 I trimmed the foliage as much as possible and removed excess shoots to clear the space and allow light to reach the coco coir. I removed the coco coir with visible white mold from the surface and wiped the pot clean of the white mold with paper. I moved the fan to blow air onto the substrate surface. I also ordered a heating mat for seedlings to place under the pot and raise the substrate temperature at night. The positive aspect of trimming the foliage and shoots is that the plant's structure is now visible; it was difficult to perform LST training before because of the dense foliage, but now I've managed to straighten the stems a bit more. I'm waiting for the heating mat and will continue to observe.😤 01.10.26 - 42 day: 1000 ml, 6.0 pH 1250 ppm. Cal-Mag 0.2 ml/l Micro 1.4 ml Grow 1.4 ml Bloom 2.0 ml

Spy420 Week 7 has begun 👏 01.11.26 - 43 day: 1000 ml, 6.0 pH 1230 ppm. The situation has improved with the heating mat: daytime temperatures are 21-22 degrees, with 55-60% humidity, and nighttime temperatures are 19-20 degrees Celsius, with 65% humidity. A dehumidifier is in the room where the box is located, and the humidity in the room is 55-60%. However, the substrate has also started drying out more rapidly because of the mat. I haven't seen any mold yet, and I hope I never see it again. ✊ The plant continues to gain weight, and trichomes are already visible on some leaves 😌 Cal-Mag 0.2 ml/l Micro 1.4 ml Grow 1.4 ml Bloom 2.0 ml