Critical Mass CBD Auto #1

Aeromatics Week 1 has been pretty easy going, and a much better start than White Widow CBD Auto. It is already outpacing both of those in size, so I do think it was some old seeds we were dealing with from that batch. I've been keeping the plug area nice and moist as we have been working towards developing some nice root structures in our .5 gallon pot. I am looking towards an end-of-week 2 transplants into out 3.9 gallon autopot, and for now, we are off to a good start! At around 50 ml per day, I have been giving the following water recipie: 1 gallon RO water 5 ml Ventana Plant Science Support 1 ml Ventana Plant Science Grow ec .75 PH 5.7 PPFD has been riding around 240, but I will slowly look to increase that over the coming weeks. Additionally, I've been debating my light structure for this one. I think I am going to move to 20/4 after week 2, or maybe week 3 after the plants have settled into their transplant. I'll keep debating, but for now, we are off to a good start!

Aeromatics Critical Mass #1: She is developing great, with a bit of a thinner look compared to a thicker indica, but she is moving great through week 1 into week 2 and she was ready to transplant! I look forward to the airdome boom heading into week 3! Tent-wide Updates: Transplant time has arrived! These gals have been rooting nicely in their .5 gallon pots heading from week 1 and 2, and I didn't want them to get too root bound before making their move into 3.9 gallon pots. Heading into transplant, I bottom watered them to encourage that root development, and they each drank up a solid 500 to 750 ml throughout each water heading into transplant week. The mix was a simple one: 1 Gallon RO Water 5 ml Ventana Plant Science Support 1 ml Ventana Plant Science Grow .75 ec 5.7 PH With transplant, we did our standard mix of 70/30 Canna Coco Professional Plus and Harvest Hero Perlite. Once I mixed each batch, I moved aside about a 1.5 gallons and mixed in 2 tablespoons of Stash Base to enhance some of that Coco, giving it a nice boost for vegetation. Additionally, I sprinkled Xtreme Mykos onto the root bundle and planting zone on each plant and then layered that Stash Base enhanced around the rootball and the top 1/3 layer of coco. Once packed in, I watered her in with around 500 ml of water with a bit more Stash Base as well as Mammoth P Active Microbes to get them started, around the root ball and external area of the planting zone, and let her settle in before any thing else was adjusted, like airdomes or even thinking about autopot activation. It's a big move, but she was ready! Next steps are going to be working on getting the root zone ready for Autopot activation!

Aeromatics Critical Mass CBD #1: She took to our transplant well, but showed a bit of stress, as expected. I am alright with the stall since I am not super focused on a mega plant for this grow, and I am looking to minimize stress by just letting them adapt. Tent-Wide Updates: Entering week three, we are focused on a hopefully swift recovery from the transplant into 3.9 gallon autopots. Both plants too to it well, with #1 looking the worse for ware across the two. I top watered each plant with 500 ml of the following mixture: 1 Gallon RO Water 5.5 ml Ventana Plant Science Support 1.5 ml Ventana Plant Science Grow .5 ml Ventana Plant Science Structure Additionally, we made a big move in the hope to minimize stacked stress, the shift from 24/0 to 20/4 light schedule. I want to give these CBD plants a chance to relax a bit and since I don't need to push that 24 hour light cycle, I will let them take it easy for 4 hours a day. I have also turned on my autodomes to around 6 hours a day, with incremental increases planned throughout the next few days t encourage root growth. Outside of that, we are in a transition week before we hopefully turn our autopot reservoir on and hit the boom!

Aeromatics Critical Mass CBD Auto #1: She has big ol fan leaves! I'll continue to train her easily throughout the week to get some light on her side nodes. Tent-Wide Update: Autopots Activated! I tested her with a few 500 ml waters throughout the week to see if she would draw some from the reservoir, and she proved ready to go heading into day 22. Thus, I activated the system in full! I filled my reservoir with 3 gallons of a vegetation supportive mixture: 3 Gallons RO water 1.5 ml Ventana Plant Structure 6 ml Ventana Plant Science Grow 21 ml Ventana Plant Science Support Both plants drank up well, but three gallons was a bit too much for 1 full, so I am going to shrink it down to 2 gallons moving forward. I have my airdomes on in full for the 20 hours that the lights are on. PPFD might be a bit high (380), so we will see if I want to drop it down to avoid stress. All in all, I am happy and we are off for a big growth spurt!

Aeromatics Critical Mass CBD Auto #1: She has really started to settle into her new home! After a bit of transplant stress and slower-than-expected growth, we finally started seeing some momentum as her root system established itself in the 3.9-gallon fabric AutoPot. Her color was initially on the lighter side, but a small adjustment to our Ventana Plant Science nutrients helped bring back some healthier green growth. She has also responded well to some gentle LST, which has opened up the canopy and exposed several developing side branches to the light. Tent-Wide Updates: Weeks four and five brought some exciting developments as we officially transitioned both plants over to their AutoPot reservoir! After a few controlled bottom-watering tests, both plants showed signs of taking up moisture from the trays. Once the coco had fully wicked and the plants appeared comfortable, I activated the reservoir and allowed the system to take over. The first two gallons disappeared surprisingly quickly, although consumption slowed once the coco became fully saturated. We also gradually increased our AirDome schedule from a few short intervals to running throughout the 20-hour light period. Both plants seem to be adapting well to the additional root-zone aeration. Nutritionally, we made some small adjustments as the plants moved through vegetative growth and into their early flowering transition. Both were showing lighter green foliage, so we increased Ventana Plant Science Support while gradually introducing Flower alongside Grow. Our reservoir mixtures during this period generally included: One Gallon of RO Water Ventana Plant Science Structure: 0.5 ml Ventana Plant Science Grow: 1–2 ml Ventana Plant Science Flower: 1–2.75 ml Ventana Plant Science Expand: 0.5 ml Ventana Plant Science Support: 6–7 ml Target EC: approximately 0.85–1.0 Target pH: 5.7–5.8 We have intentionally kept the feeding relatively mild. Since these are CBD autoflowers, I am much more interested in maintaining healthy, low-stress growth than chasing maximum size or yield. I also introduced some gentle LST to both plants, using small adjustments to spread the developing branches outward and improve light exposure throughout the canopy. Nothing aggressive, just enough to open them up and give the developing flower sites some room to grow! One interesting observation was the appearance of some narrow, twisting leaves as the plants began transitioning into flower. After experimenting with PPFD in the 320–350 range, I decided to back the light down closer to 280–300 PPFD. The plants appeared to respond positively, so we are keeping things conservative for now. Outside of that, we are finally starting to see some pistils and early flower development! The goal moving forward is simple: maintain stable environmental conditions, keep nutrition consistent, minimize unnecessary stress, and let these Critical Mass CBD Autos show us what they can do! Onward to flower!

Aeromatics Critical Mass CBD Auto #1: Our first lady has continued to develop beautifully! After overcoming some early transplant stress and slow growth, she has really settled into her 3.9-gallon fabric AutoPot. Her overall structure is noticeably bushier and fuller than her sister's, with plenty of established flowering sites throughout the canopy. We did observe some downward-facing foliage during this period, which initially had me a little concerned. However, the leaves remained firm and springy, and after making a few environmental adjustments, she began looking noticeably perkier! Her color has remained relatively consistent, and her developing flowers are beginning to take shape. Tent-Wide Updates: Week six has been all about maintaining stability and allowing these two Critical Mass CBD Autos to settle into flowering! Both plants are now fully established in their AutoPot systems, with the reservoir providing our primary nutrition through Ventana Plant Science. The AirDomes continue operating during the light cycle, and both containers are maintaining consistent moisture. One of our bigger adjustments was moving to an 18/6 lighting schedule. We had previously been running 20/4, but decided that a longer dark period might be beneficial as the plants progressed through flower. Since our primary goal is quality rather than maximum yield, I am perfectly happy giving these ladies a little extra rest! We also continued keeping our light intensity relatively conservative rather than pushing PPFD unnecessarily. Nutritionally, we gradually settled into a flower-focused Ventana Plant Science reservoir recipe. With #2 showing lighter foliage, I considered increasing nutrients or adding Cal-Mag, but ultimately decided against introducing unnecessary variables. Ventana Support already supplies calcium and magnesium, and I wanted to give the plants an opportunity to respond to a consistent feeding program. Our reservoir recipe during this period included: One Gallon of RO Water Ventana Plant Science Structure: 0.5 ml Ventana Plant Science FlaVUH: 1 ml Ventana Plant Science Flower: 3 ml Ventana Plant Science Expand: 0.5 ml Ventana Plant Science Support: 6 ml Target EC: approximately 0.95 Target pH: 5.7–5.8 We also introduced our first Stash Bloom application alongside Mammoth P, continuing the supplemental feeding approach we previously established with Stash Base and Blend. Rather than adding organic amendments to the AutoPot reservoir, I prepared a separate, diluted root-zone drench and applied it from above. Both plants received approximately 1.2 liters, after which I removed the runoff and cleaned their AutoPot trays. The plants responded well following the application and cleanup, with noticeably improved leaf posture and continued flower development. While I cannot say exactly which adjustment contributed to the improvement, I am happy with how both plants are looking! One thing I am really enjoying about this grow is observing how differently these two plants express themselves despite being the same strain. #1 has maintained a compact, bushy structure with larger developing flowers, while #2 has grown into a more open plant with numerous smaller flowering sites. Both are beginning to show some early resin development, and we are seeing plenty of fresh white pistils as the flowers continue to build. Outside of that, there has not been much aggressive intervention this week, and that's exactly how I want it! Moving forward, the goal remains simple: keep our environmental conditions stable, maintain consistent nutrition, avoid unnecessary stress, and allow these CBD autoflowers to develop at their own pace. Onward to bigger flowers and hopefully some beautiful CBD-rich medicine!

Aeromatics Critical Mass CBD Auto #1: Our first lady has really started coming into her own! After the slower establishment and transplant stress we experienced earlier in the grow, she has developed into a wonderfully bushy plant with an impressive number of flowering sites throughout her canopy. She has maintained a much deeper green coloration than her sister, with relatively broad foliage and a compact, heavily branched structure. Our earlier LST work has paid off nicely, allowing several secondary branches to develop into promising flowering tops. One interesting observation during this period was some persistent downward-facing foliage, even during the middle of the light cycle. Initially, this had me concerned about potential root-zone or environmental stress. However, the leaves remained firm, springy, and healthy to the touch, and her flowers continued developing without interruption. After adjusting our environmental conditions and moving to an 18/6 light schedule, we began noticing improved leaf posture. By the end of this period, she was looking much perkier! Her flowers are beginning to stack, and we're starting to see some early trichome development around the emerging buds and sugar leaves. Overall, I am really happy with how she has developed. For a plant that struggled a bit early on, she has certainly made up some ground! Tent-Wide Updates: Weeks six and seven brought a number of interesting developments as we moved further into flowering and continued refining our environmental and nutritional approach. One of our most significant changes was transitioning from a 20/4 light schedule to 18/6. After observing some downward-facing foliage and considering the overall development of both plants, I decided to provide a longer uninterrupted dark period. Since this run is focused on producing high-quality CBD flower rather than maximizing yield, I am perfectly comfortable being a little more conservative with our lighting. We also worked on stabilizing our environmental conditions, bringing temperatures closer to 77–78°F and adjusting humidity downward as flowering progressed. Our light intensity remained relatively conservative, generally around 340 PPFD across the canopy, with some higher flowering sites approaching 400 PPFD. Both plants continued drinking through their 3.9-gallon AutoPot systems, with our AirDomes operating throughout the light cycle. Nutritionally, we completed our transition into a flower-focused Ventana Plant Science feeding program. Rather than pushing nutrient concentrations higher, I wanted to establish a consistent reservoir formula that would support both plants through flower development without introducing unnecessary stress. Our reservoir recipe during this period generally included: One Gallon of RO Water Ventana Plant Science Structure: 0.5 ml Ventana Plant Science FlaVUH: 1 ml Ventana Plant Science Flower: 2.5–3 ml Ventana Plant Science Expand: 0.5 ml Ventana Plant Science Support: 6–6.5 ml Ventana Plant Science Grow: 0 ml Target EC: approximately 0.80–0.90 Target pH: 5.7–5.8 We also continued our supplemental feeding program with Stash and Mammoth P. Having previously introduced Stash Base and Blend, we moved into our first Stash Bloom application on October 16. Rather than adding organic products directly to the AutoPot reservoir, I prepared a separate Bloom and Mammoth P root-zone drench, allowing us to introduce these amendments from above while maintaining a clean mineral reservoir. The mixture was diluted to approximately 1.0 EC and adjusted to pH 5.5 before application. Both plants received approximately 1.2 liters, after which I removed the runoff and cleaned the AutoPot trays. The following day, both plants appeared happy and vigorous, with #1 showing particularly encouraging improvements in leaf posture. While it's difficult to isolate which adjustment contributed most to that improvement, I am very happy with how the plants responded to the overall maintenance and feeding program. One of my favorite aspects of this grow has been observing the differences between these two plants. Despite sharing the same genetics, lighting, environment, and nutrient reservoir, #1 has developed into a dense, bushy plant with substantial foliage, while #2 has taken on a much more open, elongated structure. It's a great reminder of how much variation we can see between individual plants, even within the same strain! Outside of that, we're finally beginning to see the flowers take shape, with plenty of fresh pistils, developing bud sites, and the earliest signs of resin production. Moving forward, the plan remains the same: maintain stable environmental conditions, continue our conservative flowering nutrition, avoid unnecessary training or stress, and allow both ladies to develop at their own pace. We're not trying to grow the biggest plants possible. We're trying to grow beautiful, healthy, CBD-rich flowers while documenting everything we learn along the way! Onward to the exciting part of flower! Tent-Wide Updates: Weeks six and seven brought a number of interesting developments as we moved further into flowering and continued refining our environmental and nutritional approach. One of our most significant changes was transitioning from a 20/4 light schedule to 18/6. After observing some downward-facing foliage and considering the overall development of both plants, I decided to provide a longer uninterrupted dark period. Since this run is focused on producing high-quality CBD flower rather than maximizing yield, I am perfectly comfortable being a little more conservative with our lighting. We also worked on stabilizing our environmental conditions, bringing temperatures closer to 77–78°F and adjusting humidity downward as flowering progressed. Our light intensity remained relatively conservative, generally around 340 PPFD across the canopy, with some higher flowering sites approaching 400 PPFD. Both plants continued drinking through their 3.9-gallon AutoPot systems, with our AirDomes operating throughout the light cycle. Nutritionally, we completed our transition into a flower-focused Ventana Plant Science feeding program. Rather than pushing nutrient concentrations higher, I wanted to establish a consistent reservoir formula that would support both plants through flower development without introducing unnecessary stress. Our reservoir recipe during this period generally included: One Gallon of RO Water Ventana Plant Science Structure: 0.5 ml Ventana Plant Science FlaVUH: 1 ml Ventana Plant Science Flower: 2.5–3 ml Ventana Plant Science Expand: 0.5 ml Ventana Plant Science Support: 6–6.5 ml Ventana Plant Science Grow: 0 ml Target EC: approximately 0.80–0.90 Target pH: 5.7–5.8 We also continued our supplemental feeding program with Stash and Mammoth P. Having previously introduced Stash Base and Blend, we moved into our first Stash Bloom application on October 16. Rather than adding organic products directly to the AutoPot reservoir, I prepared a separate Bloom and Mammoth P root-zone drench, allowing us to introduce these amendments from above while maintaining a clean mineral reservoir. The mixture was diluted to approximately 1.0 EC and adjusted to pH 5.5 before application. Both plants received approximately 1.2 liters, after which I removed the runoff and cleaned the AutoPot trays. The following day, both plants appeared happy and vigorous, with #1 showing particularly encouraging improvements in leaf posture. While it's difficult to isolate which adjustment contributed most to that improvement, I am very happy with how the plants responded to the overall maintenance and feeding program. One of my favorite aspects of this grow has been observing the differences between these two plants. Despite sharing the same genetics, lighting, environment, and nutrient reservoir, #1 has developed into a dense, bushy plant with substantial foliage, while #2 has taken on a much more open, elongated structure. It's a great reminder of how much variation we can see between individual plants, even within the same strain! Outside of that, we're finally beginning to see the flowers take shape, with plenty of fresh pistils, developing bud sites, and the earliest signs of resin production. Moving forward, the plan remains the same: maintain stable environmental conditions, continue our conservative flowering nutrition, avoid unnecessary training or stress, and allow both ladies to develop at their own pace. We're not trying to grow the biggest plants possible. We're trying to grow beautiful, healthy, CBD-rich flowers while documenting everything we learn along the way! Onward to the exciting part of flower!