LSD - Cream Mandarine XL (Auto-DWC-Led)

4th Week Report 07/11/19 - 14/11/19 In photos CMXL is on the left and LSD on the right 07/11/19 Flushed the the water, rinsed a little the tote with tap water and filled it with 36L of 35% strength solution (increased from 30%). Stopped using root stimulator as there is a good root development and started to add "Growth/Bloom Excellerator" No preflowers signs for both, but LSD looks like at the end of the week or at the begging of the next she will show preflowers. LSD showing new growth after FIMming, but it looks a little strange and fatty, I think the cause is the stress. It's still growing, so I think she will recover well. 08/11/19 Built a small DIY evaporative cooler (https://www.instructables.com/id/DIY-baby-swampy-small-evaporative-cooler/) too keep lower temperature while adding humidity. Now it's stopped and it will be used just if needed 11/11/19 LSD showing first preflowers! It seems FIMming didn't worked because LSD is growing like a not trained plant, maybe the stress just increased a little the lateral growth 15/11/19 Moved the temperature sensor from inside the tote since the temperature stays 19-21 °C and placed it on LSD main cola next to the top to measure air temp. Updated the main program so now it automatically regulates the light intensity basing on air temperature (if the air temperature is over 30°C the microcontroller will automatically decrease light intensity to reach again 30°C, otherwise the lights will be at maximum power). To achieve this goal was used a PID Library (https://github.com/br3ttb/Arduino-PID-Library/) Sorry but this week I have been busy, so I didn't took too many pics. However both of them are growing healthy. Now I'm training CMXL doing just some small defoliation removing 1-3 big fan leaves every 2-3 days. No more stress for LSD! Last Update 15/11/19 Next Update 17/11/19 or 18/11/19 See you guys ;)