By continuing to use the website or clicking Accept you consent to our cookies and personal data policy and confirm that you are at least 18 year old. For details please see Privacy Policy and Terms
Accept
Controlling room temperature for digital A/C unit
GoldenGromiestarted grow question 4y ago
Got an inkbird controller for heat/cool. My air conditioner for the room is digital. When ac kicks on it just sends power does not turn unit on. Do i need to buy a mechanical ac unit instead of digital? Many thanks
Open
Setup. Sensors
likes
Answer
Mrs_Larimaranswered grow question 4y ago
ii had that problem with the inkbird humidity controller. my first humifidier worked digital, and did not take the signal from the inkbird controller
i took a " analog" humifidier and it worked
1 like
Complain
Similar Grow Questions
Solved
snowmanbl90d
PH TestingI have a vivosum ph meter, a ph tester for the up/down ph liquids and ph test strips. All of them don't seem to agree with each other with in a range of 1 ph across the ph scale. My question is what is the most reliable or is there a different method I should use?
5y ago
3
4
Solved
russrahl
Can I use Smart Water to mix up ph powder calibration solutions?Cant find deionized water where I live to mix up my ph powder solutions and be confident they are correct. I used generic distilled water before but later realized it was not neutral at 7.0 ph. So long story short google says Smart Water is 6.98 ph, Think I can use it instead?
Week 7
Setup. Sensors
5y ago
2
2
Solved
Peweez
Connecting 2 SANlight evo 3-100 with AC Infinity Controller 69 PROHi guys,
I want to connect 2x SANlight 3-100 1.5 with AC Infinity Controller 69 PRO. I searched on the internet and found that i'll need this sanlight Trolmaster RJ12 cable and this AC Infinity UIS Type-A RJ11/12 0-10V Dimmer. Do I need this stuff for each lamp or can i combine?Setup. Sensors
Setup. Lighting
4mo ago
2
3
Solved
WeGrow
placement of sensor for humidity/temperatureWhere should I place the sensor for humidity/temperature? I see huge differences depending on the spot, I have placed the sensor now slightly below the top leaves - above the lamp directly hits and it has 4 degrees (celsius) more!
Week 6
Setup. Sensors
4mo ago
3
3
Solved
laberg
Set auto system for VPD or RHI have AC Infinity set up. I am wondering whether I should have the humidity triggers set up for VPD or continue with RH triggers. So far I have it triggered when humidity gets a tad low. If I trigger for VPD, I think I will have to constantly check leaf temp. Thoughts?
2y ago
1
2
Solved
ClydeGrows
pH meter calibrationSorry for all the Q's lately haha! pH meter problem. Trying to calibrate and it reads all three solutions as 3.9-4.3?? I used distilled water and fresh sachets. Literally arrived today and it ain't fucking working 😂😂 universe is against my grow :(Setup. Sensors
3y ago
8
6
Solved
Minnesota_Grows_420
CO2 meter suggestionsSuggestions on a decent reasonably priced CO2 meter? ThanksWeek 2
Setup. Sensors
2y ago
2
2
Solved
Puffdamagikchillum
Hygrometer with probeWhat is everyone buying for a Hygrometer with probe?Setup. Sensors
5y ago
3
3
Solved
Z1984
RH% and temperatureHi guys, got the transplant done today as suggested by Burmese.
I have an issue after transplant:
- My RH doesn't seem to go below 62%
- Is this level bad for the plant?
- What is the optimum RH and Temp for this strain?
- Or average optimum temp and RH in general?
Thank you :)
5y ago
1
1
Solved
JSanchezz
serious question about VPD value in the tentI'm not sure which values I should consider more important, or both.
I have one sensor about 10cm above the Canopy and one sensor directly below it.
I am trying to keep the VPD optimal in this grow, but which one is the "right" one?
Setup. Sensors
1y ago
3
Solved
versace_grow
RH 90% during Flowering!I have a problem with RH. I am at the 3rd week of Flowering and I'm struggling to keep my RH down. Today it was 90% when I opened the grow box. I have access only to a window. Is it better to suck air inside or blow the exhausted air out? I can't do bothSetup. Sensors
Setup. Ventilation
5y ago
2
3
Solved
Newbiegrower420
I was struggling with low humidity, now I can’t keep it below 70%.Hi! Since upgrading my 4 girls into new 3 gallon pots & giving them a good water the humidity levels in the tent have soared to over 70% Will this reduce as they drink all the water in the pots? Shld I invest in a dehumidifier yet? Running out of space 😬
Week 3
Setup. Sensors
5y ago
3
5
Solved
versace_grow
Hi everyone, I would like to ask you how you test Temperature and RH. Do you put your thermometer under the direct light at the base of the plants or inderectly, because I have pretty different values . If I put it under the light my temperature is near 35°C and RH is under 20%Setup. Sensors
5y ago
2
5
Solved
Hisknibbs935
Pre run test showing high temp and low humidity,Hello,I have pre run to test the temps and humidity on my first one ,i run a 600w hps in a 1x1x2 tent with 5 inch rvksileo extract my temps at at 35c and my humidity below 30 despite setting for 55% would a test without a plant be false ? Should i drop to 400 ?
Setup. Sensors
Setup. Lighting
5y ago
1
3
Solved
Chucky324
Hey...Grow Diaries...What is going on?What is up with this web site. Shuts down Friday and starts up on Monday. Is someone having a long weekend every weekend? Has this site been hacked? Should I be concerned because you have some personal info of mine? Can you tell us what's going on so we are not so concerned?
Setup. Sensors
4y ago
3
5
Solved
AirDuster
Reducing PPM without changing water in hydroThanks all for guidance on my previous question. As a follow up, can PPM be lowered by reducing feeding until they hit the right range? Currently 1500ppm but seems this is too high. Currently following the AdvancedNutrients plan.Other. General questions
Setup. Sensors
Feeding. Schedule
5y ago
3
4
