Likes
Comments
Share
@DevilsBud
Follow
New week in supported marshydro grow FLOWERING TIME last run i did it under a TS-1000 But this time it will be under the amazing FC-4800 i am so excited to boost up everything and see what i can approve from last run đŸ€˜đŸ»đŸ€˜đŸ» Starting to put them in 12/12 schedule they have bin put in darkness for 12 hours and now hopefully let the flowering Begin fucking love this stage đŸ€˜đŸ»đŸ˜ŽđŸ€˜đŸ» 27/10/21 All plants Transplanted in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Have some ideas for my grow tent I have my plants on hard plastic pallet And i ordered plateau with ball bearing So i can turn my plants around with one spin 😎 basically a huge turntable wikiwki Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 ÎŒmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
1
Share
@Kalyx
Follow
still got enough and waiting a bit longer to harvest
Likes
18
Share
Hey Growmies, I apologize for the lame diary this week. I've been sick on and off the last two months and it's really taking a toll on my body and heart condition. Please forgive me as I'm trying to heal up. I'll do the best I can at updating this as I go along. I'm not giving up! The girls look great, despite not giving them as much attention as id like and they deserve. Great week of growth. I let her do her thing. I did minor LST and some hst on the other girls that I haven't made a diary for yet but will. Day 19 of flower.. week 3 of flower is about to wrap up which is nearing the end of the stretch phase. I was pleasantly surprised with the growth on the Watermelon Zkittelz, I've been putting the most work into her as the technique I'm using requires a lot of attention. Next run I will use tie downs and I'll most likely add a trellis here soon too help hold the heavy colas.. but we will see how it plays out. Looking forward to seeing her buds start to stack before my eyes! Thank you to everyone who has helped me through this journey! I've been really sick lately and my girls help keep me going! Day 20 of flower Today went well, I reorganized the tent and cleaned it a bit, I try to clean it once a week or so. I've been hand "drip feeding" one of the girls the last few days. Just an expierment and the plant seems to love it so I'm going to start hand "drip feeding" all of them. I think the Watermelon Zkittelz is going to love some extra food every day! I know us humans do but it's important to make sure the girls aren't stressed and isnt in a nutrient lock out or something. I think it's best when she's running prime! At the end of day 20 of flower I took a video of all the new growth and it was after I reorganized the tent and I feel so much better after doing this. I also turned off all the lights and turned on each light individually so I could see how each light was casting on each plant. This way I know the plants are getting enough light coverage as that is a huge disadvantage of using these budget lights. Excited for the 3rd week to come to an end!! Adding new nutrients next week!! Day 21 of flower ( end of week 3 of flower, 11 weeks from seed ) Grow is going great!! Have a good day!
Processing
Likes
4
Share
Start of week 4. This girl stretched an inch during week 3 and her bud sites continued to pack on size and take shape. She is very sticky to the touch, with a slight citrus, earthy smell.
Processing
Likes
27
Share
4/5: Took 4 cuttings from the shortie 4/12: All 4 are rooted and growing! 5/1: Transplanted from 1gallon pots to 5 gallon pots. 5/3: Decided to grow one of them in my tiny tent and the other 3 will go outdoors. 5/4: Took 2 of them outdoors under the 270w and sunshine. 5/6: Trained all of them today and fed some boomerang along with the kelp, molasses, big bloom, and silica. Foliar fed and took the last one outdoors. The one in the tent is really flourishing! 5/7 - 5/17: Excellent growth! The supplemental lights are making all the difference.👍 Did some more training on all of them early in the week. The one in the closet is spreading out nicely and budding up pretty quickly...but what's very cool is that all 4 clones outdoors are flowering?!?!? I sure hope they go ahead and finish rather than starting to revegetate as the days continue to get longer. Much rain for the past few days, but it let up long enough for me to install another 200w of waterproof 3000k LED lights a couple of feet above them. Very intense lighting, great bang for the buck. So now, I've got 350w of 3000k and 120w of 6500k in the outdoor garden. That's gonna have to do it, as I also am using 1400w in my indoor gardens, plus a/c..bills are getting ridiculous. 5/18 - 5/28: The clone in the tent is still stacking up really well. I guess the ones outdoors are too, but next to the seedling plants, they seem puny. Many buds though... Since they decided to flower early, I sprayed them all down with a product that is loaded with hormones and auxins and stuff that's supposed to retard vertical growth and promote branching. It's also supposed to speed arvest time by as much as a week. I hope they can finish before the summer solstice (June 21), otherwise they might try to reveg instead of finishing.. Hopefully it helps keep them from stretching so much that I'll have to supercrop them. Their mamma was a shortie, so they really shouldn't get too tall anyway. I also foliar fed them several times this week with something called MicroLife Maximum Blooms, Pow! They love the stuff! 5/28 - 5/31: I did some training on a two of the outdoor clones early in the week between rain showers, and foliar fed with Microlife maximum bloom formula. She was looking a little N deficient, so I assume the dry amendments have petered out. They were dry enough, so I top-fed her with another couple tablespoons of cavern culture and on the 31st. I gave them big bloom, tiger bloom, grow big, beastie bloomz, silica, endoboost, signal, humic acid, liquid kelp/fish emulsion, and liquid molasses. The indoor clone is looking awesome. I fed her heavily on the 30th. It just feels so strange that I'll be harvesting outdoor photos in June!?! That's it for week 8- 6/1 - 6/8: Early in the week I gave them about a half gallon of water with liquid molasses, cal-mag, silica, and beastie bloomz only. I foliar fed them a couple of times during the week, right at daybreak. I fed them on Saturday, the 6th..about a gallon each..beastie bloomz, microlife maximum blooms, cal-mag, humic acid, grow big, big bloom, sweet & sticky, and signal. They are looking very good..buds galore. The indoor clone got the same nutes, but on different days. She's also covered in buds, and they are beginning to fatten up.👍 6/9-7/4: Busy with other gardens, so not many updates... Indoor clone got to spend the last 2 weeks of her life in my closet under the quantum boards and UVB. I harvested and washed her buds on 6/28, let her hang dry and weighed and jarred her up on the 4th of July. She came in a 111g of cola and 45g of lower bud with only about 5g of larf. Nice!👍 She smells just like her mommy and has the same uber-dense buds. She was topped, so the buds aren't as mighty as the mamma's, but much more plentiful.👌 Outdoor clones: I had a massive spider mite attack, and during the same week, I had a grasshopper invasion...I lost a few plants, one of which as a FFT1 clone. I had just harvested my autos and my indoor clones from the closet, so I moved the remaining two clones in under the quantum boards. I treated them for spider mites several ways for several days and have given them much TLC. Hopefully their buds fatten up some more. They stanky, but they kinda slim... 7/11: I harvested the last two clones tonight. So sticky!!! I washed them and hung them to dry.
Processing
Likes
4
Share
@Stick
Follow
She's a beauty! Stretching and building its preflowers at full speed while praying the light. I love those sativa leaves, and they are less problematic than indica ones since the light penetration is much better. She should give a nice yield, I can't wait to smell the buds!
Likes
21
Share
@Freddd
Follow
The Jedi came down at 11 weeks. The other blackberry came down at 8.5 weeks, for a total production of 2.5zips plus 7.5 zips. I've had to estimate the Jedi at the moment, there was 1050 gm wet weight of trimmed bud on minimal stem. I would expect the dry weight to be 21% of that but I will update the numbers next week. She is a spacious plant and very branchy but you can continually trim branches as you defoliate throughout the grow, she responds well to both. Floats like a butterfly and hits like a steam train. It's been over two weeks since the Blackberry was harvested and she's all gone now, never even got a chance to dry properly. Basically she kept me going while waiting for this Jedi, who I already knew was going to be soaking with resin. I was hoping for 8 zips total with 4 for each plant but I ended up only getting 2.5 on the blackberry but I got an easy 7.5 of mostly grade a bud so a total of 10 zip for both plants in the same pot. They were expected to mature together but the black berry was a week or so early, so as you can see in the root shots her roots had died and made the Jedi roots rot as well but this shows you the resiiance of the Shallow Water Culture as I do it because of added redundancy, I could not even tell there was a root problem didn't after the Jedi at all but it's good to be away of, I'm back to single pots for a while now.
Likes
2
Share
@Ninjabuds
Follow
Not a lot to update the seedlings have came up out the soil at this point they are still to small to tell any visible differences. I started all the seeds from all 10 packs and and I put 26 of them in soil I now have about 20 of them left I still have atleast one left if every strain. I just kept the 20 plants that all started off at the same time it’s so much easier when there is not some plants behind from the rip. In a few days I will pick out the best one from each of the 10 strains and toss the rest so sad there is a plant count here.
Processing
Likes
21
Share
February 20, 2019 update: The good news is the babies are all growing, the not so good news is there seems to be a slight bug infestation. Since taking these pics and video I have sprayed them with a mild Neem Oil & Water mix (about 20:1), hoping that helps. I also have a few clones looking a little funky, but that's OK with me, out of these 16 babies I really only have room for 9-12 in my flowering area and 12 would be pushing it. The MediKush & DinaMed seedlings are doing great. DinaMed's are still taller, but the MediKush has some beautiful tight nodes.
Likes
23
Share
@simps
Follow
Shoog from BulletProof genetics this little plant is growing fast strong happy with the girl who’s gonna be a big plan I can tell both Plants are growing pretty well s Shoog one It’s growing faster than shoog 2 put both plants are doing pretty wellShoog one is really taking off One of my favorite plants this year so far just like haw fast it grows and how strong and healthy this plants are I have high hopes for theses phenos trying to find some amazing strains to work with on my breeding projects bulletproof genetics has some amazing genetics if you get a chance go check them out on Instagram or bulletproofgenetics.com
Likes
9
Share
@Colo420
Follow
Atrasados con el seguimiento debido a las vacaciones pero aquĂ­ regresamos!! Proximamente 6 comienzan su flora en exterior y 2 en interior
Likes
19
Share
@Tmasm
Follow
SaudaçÔes. Bem melhor planta do ano no meu jardim. Voltei plantar no futuro, sem dĂșvida. Bem chegou o grande dia, cortei minha menina. Ela tem botĂ”es tĂŁo lindos que atĂ© me custou um pouco cortar. Na sala tinha ĂĄcaros aranha, mas menina nĂŁo foi afetada. Adicionei luz UV-C para manter praga controlada, mas acho que minha menina tem poucos cabelos, deve ser por isso. Agora nos Ășltimos dias menina estava sozinha, luz UV-C apagada cabelos aparecendo. Bem nĂŁo Ă© grave ela estĂĄ cheia de resina, um cheiro apaixonante, deve ter um poder que dĂĄ medo 😂 Estou rendido com qualidade de Dutch Passion. Bem todos cultivadores tem um dia plantar genĂ©tica directa de Dutch Passion. Sim pois indirectamente jĂĄ todos nĂłs provĂĄmos, todos banco do mundo tem um pouco de Dutch Passion. Cannbis e seu mercado como o conhecemos hoje, devemos muito a Dutch Passion pioneiro no mercado. NĂŁo preciso dizer para ir ver novidades e promoçÔes em Dutch Passion Bem melhor planta de interior do ano 2024 no meu jardim. Voltarei plantar estĂĄ menina fazendo mĂŁe para minha coleção de mĂŁes. No geral correu tudo bem, para mim melhor planta de concurso, fazendo um comparando outros diĂĄrios. Muitos podem concordar comigo. Tenho pena nĂŁo ter tido tempo para tirar uma boas fotos, que era principal objectivo de concurso. TambĂ©m com mĂĄquina fotogrĂĄfica de alta qualidade e ando tirar fotos com telefone de merda. Podia muito bem estar no pĂłdio, e tivesse dedicando uns minutos para tirar fotos. Bem para o prĂłximo ano vou tentar fazer melhor. Tive ela secar por 10 dias pendurada inteira, mais 5 dias embrulhada em papel. Estou pronta para entrar em cura. Tem botĂ”es lindos, duros como pedra, cheios de resina e um cheiro delicioso, fiz uma pequena prova, mas ainda sem cura sabor terraço com uma mistura frutado, simplesmente deliciosa, aguardar por curar. Ansioso para poder provar todo seu esplendor. SaudaçÔes atĂ© breve
Processing
Likes
3
Share
@Reaper
Follow
week 7 flower: big fanleaves start to die off and the purple/yellow colors appear on the plant. one more week before harvest
Likes
12
Share
@Hawkbo
Follow
They all doin pretty good, leaves are a little too yellow for my liking at this point I should have added some grow to the mix but they will be fine I think. I have 3 of these going one is at an earlier stage but they seem to have very elongated bud structure with a solid stretch in flower. REMEMBER , IF YOUR SHOPPING FOR GEAR YOU CAN USE THE CODE “BANGDANG” FOR 10% OFF YOUR ENTIRE PURCHASE FROM ANY OF THE FOLLOWING COMPANIES. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led NEW* @Rocbudinc Seeds on his website * *****Gorilla grow tent discounts extend to all companies affiliated with grow strong industries which include..***** @super.closet Lotus Nutrients Kind LED grow lights
Likes
11
Share
Likes
9
Share
Missed a week posting. I feel like the buds are forming slow. I have a lot of leaves that are blocking bud sites but am hesitant to cut too much.
Likes
12
Share
Topping a sprig on the third plant 😊
Likes
114
Share
@Natrona
Follow
This week, my Titans are sleeping in a cooler dark room until harvest. So for your viewing pleasure, I've loaded some videos made of the Titans during there time with me. I'm wondering what to serve at my Queens Tea Party... I made some butterscotch pistachio bars and modified the recipe for less sugar. 😋 We experimented with topping the bars with black cherry spread, orange marmalade and a mango jelly. All are very tasty as the bit of sour/tart enhances the butterscotch sweet. A few solar eclipse pics.