Always room for improvement.

Hey growmies! week 3 of flower flew by, this week is only 6 days, as last weeks entry went on for a day longer. I didn't really touch the flower this week, just let her grow, next week I will probably pluck off some more leaves. feel free to provide input. if you watch the timelapse. you can tell she stops dancing towards the end of the week, so I assume her stretch is as good as over. no real smells yet, just smells like fresh greens still.

piante ancora stressate spegnerò la luce per 24 ore... se trascorse le 24 ore staranno meglio più chiare e rilassate le manderò in fioritura... ho dato 1 ml di bio grow a un esemplare su dieci

10/27 end of week 2. hopefully smaller one doesnt wobble off the bricks.

Harvested the Clones! I'm stoked how #4 grew out, I think she's the winner! With limited space in my grow, I'm only going to be able to bloom out the rest of the phenos clones to week 3-4.. The show must go on.. It's the price I must pay for using non-ideal cloning methods... Next round of phenohunting will have 100% cloning success, using my new aeroponics cloning machine.

Great grow from start to finish, very resilient plant and would of given her some more TLC if I was to grow her again.

Ich denke die 2 Bruce Banner und die Critical kommen noch. Die sehen prächtig aus.

Week 2

The purple lemonade is getting some beautiful sticky fat dank buds and the gorilla cookies is flowering nicely the node spacing is super close so i will be looking at some super dence fat sticky buds the smell is amazing i cant wait to have a joint with the two strains combined in it .

Welcome to the Zamnesia Spring Cup 🏆. Hey everything together 🤗. This week has continued to develop super 👍. It was topped for the first time 3 days ago. I think I will not use LST this time because of the short time that remains 😅. Maybe I will do it a few more times top 😁. The Monster Bud Mix also seems to be working, they're pretty dark. They are a little too dark for me , but I will see that in the coming days. Otherwise there is nothing great to report for this week. I wish everyone a nice week, stay healthy 🙏🏻 and let it grow 🌱. The Strain Runtz is available at www.Zamnesia.com Zamnesia Spring Cup 🏆🏆🏆 Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Canna Bio ☝️🏼 Nutrients : Monster Bud Mix ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧

The Future #1 strain took to germination right away, was very flexible, and worked very good for SCROG. It produced heavy buds that are beautiful. Teh strain started very strong and grew excellent. The flowers was super dense, very crystally and sticky. It will be very interesting to see how they smoke. I had some pH issues with my water supply which impacted the grow and this strain seemed to be more light sensitive compared to another Anesia strain right next to it. Wet bud weight is prior to trimming. The buds off of this plant were HUGE!!!! Wet weight - 58.8 oz prior to trim; 14 colas; Terps: White - 70%, Amber - 30% After 3 days of drying, took them down to trim for my jars. Dry weights into jars: Future #1: 9.06oz I did pull them after a day to dry rack them for 12 hours due to a little bit higher moisture content then I would have liked (+70%rH). Re-jarred on 6/1/23 and now holding steady at around 60% rH. Cure Check In: 6/10 - 6/12/23: rH ~ 63 - 66%. Daily air exposure & fanning. Very smelly. Looking good - another couple weeks and will be ready.

Still in the HPS tent but now they are under the LED again and doing pretty well as the roots are filling the pots out they are eating faster. Did a couple foliar feeds with the Growzyme at less than 1 ML/Gal which they seem to like. Hoping to get a little more vertical growth before they kick into flower. Also been doing some bottom feeding which I have been experimenting with a little bit. It seems to increase rate of growth and the plants seem a little happier when I do a few feeds like that in a row. REMEMBER , IF YOUR SHOPPING FOR GEAR YOU CAN USE THE CODE “BANGDANG” FOR 10% OFF YOUR ENTIRE PURCHASE FROM ANY OF THE FOLLOWING COMPANIES. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led *****Gorilla grow tent discounts extend to all companies affiliated with grow strong industries which include..***** @super.closet Lotus Nutrients Kind LED grow lights

Week 2 going 💪🏼 used fish shit and water

So im retroactively uploading this after some phone issues the weeks may not be 100% accurate but the content is! did some cloning a while back (round1) and i got a little too comfortable with minimal roots showing and only 8 of the 15 survived. about 2-3 were very small and objectively should not have been attempted one will not survive due to a stoner error in leaf cutting. i've learned in this field patience is key and learning is essential. I made some mistakes, and dont plan on making again

Primera semana de crecimiento de estás critical, fue una semana sin complicaciones, humedad relativa en 40% y temperatura rondando 20-23 grados, tienen un color espectacular boludo, estoy deseando que llegue la época de florar. Volvemos por aquí las proximas semanas guachines . 🇦🇷🇪🇸 Muchos humos para todos 💨💨💨

Day 15 Today I switched the lights from the Seedling program to the Growth program. I measured around 640 PPFD at the canopy level so a bit high for early veg but I will leave it where it is now and keep an eye out for light stress, and raise the lights if I have to. I also added a second USB fan for increased circulation. USB fans are great when the plants are small and you don't want the stronger winds that the regular clip fan generates. I also started the clip fan but directed it towards the lights to help keep them a bit cooler. I adjusted the extractor fan from 60 secs Off/30 secs On to 30 secs Off/30 secs On in order to remove more hot air. This will have to be tweaked further and I'll monitor my temps to figure out a suitable setting. It becomes a balance between temp and humidity. I really wish I had a system where I could set a target VPD and then the system would automatically adjust temps and humidity to follow that target. Not practical in my small setup though but maybe one day... Temps are always an issue in my setup as I have two powerful lights inside one small tent without AC. I have set the light cycle so that the lights are on during the night but off during the day to help to balance the temp a bit. I'm also considering getting some extension cables and put the LED drivers outside the tent to see if that helps to bring down the temps a bit further. Later in the grow I will use CO2 so that will help a bit against higher temps. Finally, I watered the plants as they were getting a bit dry. The left plant got 1 liter and the right plant 1.5 liters as the sensor reported that that pot was a bit drier. I reckon it has to do with the plant being larger (almost double the size of the other plant!) I should also really get my ass in gear and hook up the Blumat system so I don't need to worry about hand watering. Day 16 Nothing to report really except some additional growth, both vertical and horizontal. Day 17 Watering time again. Gave them 6.2 pH water this time and once again more to the right plant as it drinks more. I guess around 1.3 liters for the left plant and 2 liters for the right one. I tried putting in my small USB humidifier into the tent but I soon realized that it can't share the USB power that the fans are running on so will have to get another USB power cable in there. Didn't expect that small humidifier to use that much power. Oh well, that's a job for another day. Day 18 The girls are thirsty it seems as I had to water again today according to the Blumat sensors (I really, really need to install my Blumat system as soon as possible but should get the last bits that I need in a day or two). I gave them 2.5 liters of water (pH 6.7) and once again a bit more to the right plant. I also was able to squeeze in my tiny humidifier into the tent even though the tomatoes are still in there. Turns out that all I had to do was to switch the USB power adapter from the old Samsung one that I used to a more powerful iPad charger. Now it works just fine to run the fan and the humidifier on the same power. The reason why I'm using a small USB humidifier instead of a proper one is simply due to the lack of space in my small tent. This (very basic) humidifier is the smallest one I could find yet have a decent size tank so I don't need to fill it up all the time. Day 19 The cover crop EXPLODED since yesterday so the first thing I had to do today was to cut that back a bit. I also started brewing some compost tea (AACT). I mixed together worm castings, rock dust, biochar, lime, bentonite, neem meal, kelp meal, and molasses and will leave it brewing for 24 hours and then feed it to the plants tomorrow. Would have liked to add alfalfa meal as well but haven't been able to find any. I usually put my seed starter warming mat under and taped to the brewing bucket to increase the tea temperature and microbial activity. The plants are doing their thing, a little bit taller and a little bit wider. I will probably top the right plant next week but not sure about the left one as it is smaller so might need another week. Day 20 The compost tea was ready today after 24 hours of brewing. I fed each girl with around 3 liters of tea (pH 6.8) and as I wasn't planning any foliar feeding this time around I kept the tea unfiltered. So that everything that went into making the tea ended up as a top dressing. I guess I don't have to water for a couple of days after this. Not much change is plant size but the leaves are filling out. Day 21 Today was completely uneventful so not much to report except that I probably will top the right plant tomorrow as it is up to 5 nodes.