Likes
Comments
Share
Dear Friends ❤️ in this week we topped again and bended this great Headshot by Seeds Mafia I topped the plant and remove big fan leaves that covered bud sites I missed to give top crop Big one at 14 october, it is important to give 10 days before flowering The last day of this week we switched the light to 12/12 week #5 of vegetation The 240w light is working at 50% power and now it is combined with the 480w quantum board. I consider week 4 the week from 18/10 to 24/10. day to day fert schedule: 📅 18/10 📅 19/10 NEEM OIL 📅 20/10 📅 21/10 Top Veg 3ml/L-Deeper Underground 2ml/L - Green Explosion 2ml/L - big one 2ml/L - PURPINATOR 1,2ml/L 📅 22/10 📅 23/10 📅 24/10 ABOUT HEADSHOT BY SEEDS MAFIA Headshot is a feminized cannabis strain that may grow in any environment, whether it is indoors or outdoors, and is therefore recommended to both experienced and inexperienced growers. The plants grown from the Headshot Feminized seeds are tall, compact and robust, and reach a medium height of 100-150 centimeters. Their flowering period is short, about 50-55 days. They give dense buds fully covered with a thick layer of resin. Also, this variety has quite a popular feature, it has a high productivity. It may be harvested in October and yields about 550 grams per m2. The plants reach a high THC content of 19%. Obtained by crossing AK47 and White Widow, Headshot Feminized is 30% sativa and 70% indica. Its flavor is sweet and reminds of sandalwood and oriental incense. Its name comes from its effect, which is rather cerebral and uplifting, perfect for relaxing and calming down. Data Sheet: Sex: Feminized Grows: Indoor, Outdoor, Greenhouse Height: ≈ 100 - 150 cm Yield: ≈ 800 - 1000 gr m2 Flowering time: 8 - 9 weeks Complete life cycle: October Cannabis Genetics: White Widow х AK-47 THC: 19% Type: Sativa 30%, Indica 70% 💸💸💸💸💸Buy Headshot: https://seedsmafia.com/en/feminized-cannabis-seeds/headshot-feminized.html OUR GERMINATION METHOD STEP BY STEP I Germinated all seeds in cotton pads because in my opinion is the best way, I'll tell you why. Why use cotton pads? You should use cotton pads because it is one of the fastest way to germinate seeds, it is also one of the more reliable way. This is a NOOB-FRIENDLY tenchnique, you have to respect some little and easy steps: -take one cotton pad, spray it 5 times with water; -dispose seeds in the sprayed cotton pad, remember to leave minimum 1cm of space between seeds, -take a new cotton pad, spray it 3 times with water, face it down and put it on the seeds of the first cotton pad; -now, spray the dry side 3 times. -put this/these "sandwich/es" in a sealed container of a sufficient size to store them, I use like a plastic tupperware (glass or plastic are equal) with about this size: 15x30.It contains about 8 "sandwitches". -store the container in a dark place with a temperature from 17°C and more. More light they see and colder is the place,slower will be the germination and lower will be the germination ratio. *(-If your seeds are old, not good stored and with a low germination ratio, I suggest you to use Seed Booster by Plagron. Old seeds and maybe stored in a very hot place for a long time may will be death may will not never germinate). Generally a normal cotton pad is good for 3 seeds. If you follow these steps, you will hardly have problem of non-germinating seeds. I tried all methods (except rockwool cube) and in the last two years (and I germinated a lot of seeds) I can tell that this is the faster and reliable way. I loved to use paper towel but with this metod is very easy to put too much water and it will be slow down the germination step. I really hope that this "rule" will help noob growers and maybe will help other growers to improve their skills. I personally do the step by step draw guide. ENJOY. 🔧💡WHAT WE ARE USING💡🔧 -LIGHTS: 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B temperature: 3000k Heat dissipator board: No Noise: 0dB 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B temperature: 3500k Heat dissipator board: YES 15MM Noise: 0dB -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Power: 42-50W RPM: 1940-2620 minimum -1 Maximum air flow: 430-560 m³ / h Sound pressure level at 3 m: 32-44 dBA -FANS: A)OSCILLATING FAN Maximum consumption: 20 W Minimum consumption: 17 W Fan diameter: 15 cm Housing diameter: 20 cm Height with handle: 35 cm 2100 revolutions per minute Two speeds B) COMPUTER FAN Sunon DP200A - 230V Nominal power: 22/21 Watt Noise level: 44 / 49dB (A) Rated speed: 2700/3100 RPM ± 10% Air delivery: 95/115 CFM C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h, can be used in medium-sized rooms. High silence and reliability make it adaptable and versatile. Technical details: Rotation range of 90 degrees Tilt adjustment Three speeds of rotation Suitable for wall and ceiling suspension Power Consumption: 35 Watts Air Flow: Approx. 740 mc / h Operating noise: approx. 39 db Diameter: 20 cm Voltage: 220-240V Frequency: 50Hz Dimensions: L 28 x D 16 x H 28 cm 💊💉💊FERTILIZERS: MAIN FERTILIZER BRAND: TOP CROP I use these products: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ ❤️ THANK YOU FOR BEING HERE ❤️ Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾
Likes
6
Share
@Raz666
Follow
flushing... i am almost done...
Likes
Comments
Share
@YingYang
Follow
ATHENA NUTRIENTS dwc
Processing
Likes
54
Share
@rhodes68
Follow
3/18 Week 12 Day 33/Flower Have a Norto virus in the house so being brief All looks good no changes at this time waiting on buds to say when Tricones 80% Milky 20% clear with no amber so at least a week to go before flush 3/19 Pics Lot happened overnight, looking like end of week for flush. Will continue PK for one more day as time for the last push here now as upped nuets about 200ppm. PK ends Friday, nuets will drop back 200ppm at the same time. Flush begins 3/24 Tuesday... 08:05 PDT ... 😏 3/21 Day 36/Flower Ended PK dropped CT to below 900ppm On track for flush mid-week which will be real close to Fast Buds estimate of 45 days. 3/22 D 37/F Pics Just waiting for the ripening and flush day next week. Trics pretty much all white now, still no amber but that will come during flush. Will be dropping nuets to half Monday on last feeding. 3/23 D38/F Last feeding at half strength but tossed in a dose of Recharge just to see if it matters. doubt it would but it needed using as it hitting its effective date. Flush begins tomorrow morning 3/24 D39/F Flushed each using 10 gallons PHed tap water and 5ml/gal flushing agent. Pics and vid 3/25 D40/F Runoff @235ppm about 80 ppm over the water ppm so looks like the pot is empty and we can cease the FloraKleen those roots are stripped and I am no rush on this flush.
Likes
38
Share
@MrLahey
Follow
So far all is well. Left plant is looking great still. Right plant is still the same as it was, kinda "off." I cut the top off the main cola due to light burn. There's just no way that the plants energy it was directing to it was being used well. I'd rather it go to the rest of the plant because there's just no way that initial top was going to produce anything. It was gnarled. I've also noticed something odd going on with a couple of the buds on the stressed (purple) plant. I posted one of the pics in the pics for this weeks update. Looks kinda like bud rot to me but this is also my first grow so I could be wrong. It looks like it's only affecting the pistils. I may ask a question in the question forum just to be sure. It's odd though because conditions in the tent seem to be too dry maybe for bud rot (averaging in the 50-60% RH range and there is plenty of air circulation in that part of the tent. I'm thinking it could either be the plant negatively reacting to me cutting the main top off the other day or it's just the fact that due to the plant being stressed out for the entire grow that it's lost resistance to things like bud rot, etc.. essentially, I'm not sure at all lol.. Both plants are already showing a good amount of trichome production as the plants have almost switched from stretch flowering phase to pure on flowering/bulking phase. I can't wait to see the buds really start to mature and grow and get stinky. Carbon filter so far is working flawlessly. A week ago I was thinking it wasn't keeping up because when I'd come home from work I could smell pot but it turns out it was just my cannabutter supplies that I left out lol. D'oh. I've also been monitoring conditions in my basement over the past few weeks and have noticed that rain or no rain, the conditions down there are an average 66 degrees and 60-64% RH. With my dehumidifier if the conditions down there remain in that range, I should be able to achieve perfectly optimal drying conditions for when I harvest in 4-6 weeks or so. :) I am having a blast so far and can't wait to harvest and then really apply what I've learned online from youtube, here and reddit combined with my hands on experience from this grow to really fill out the canopy next time and also ensure both plants are the same height for some great yield. I'll probably mainline 2-3 plants for my next grow. I also want to eventually get into building my own soil and amendments but for now I'm just focusing on not learning & applying too many things at once. I just know that at some time I'd like to switch from synthetic nutrients to organic. I'm hooked for life to growing though!
Likes
13
Share
@NSABND
Follow
Let´s start Day 43 😎 some sun and cloudy with rain again 😳 Day44 cloudy and rain and cold 😡 Day45 rain and cloudy 😡 temp 16C/60F .. WTF it´s summer 😡😖😱
Likes
11
Share
This week has gone exceptionally well!! Already started the training process struggled with height last time but this time I am preparing early. (No bottom buds). These ladies are growing very well and fast. Fingers crossed 🤞🏼
Likes
24
Share
@Momentum
Follow
Bei der Hash Burger ist mir klar geworden, dass der Leafly Strain of the Year Titel sich nur auf das Endprodukt bezieht. Vom Growing her performt sie eher klein und graziös, wird sicher aromatisch und ist ne schöne Pflanze, aber der Wuchs ist nicht die erwartete Bombe bis jetzt.
Likes
10
Share
Not too much on the scale but the terps and the intensity of the smoke is great. Two very distinct phenos that makes it so much interesting to understand the differences between.
Likes
33
Share
@Ema26
Follow
Day 85: what’s good guys? She’s looking and smelling great, temps are okay sitting at 25 for the most time and going down to the lowest of 16 at night. Humidity is sat at 30+ which is okay for her but not so great for my seedlings. I have a 400w hps bulb on the way so I’m hoping this will stop so much heat eating at the moisture. She still looks like she’s putting it on a bit but I think I can see quite a few cloudy trichomes and some ambers and a few clears so when she dries out next I’ll start feeding ph balanced filtered tap water for a week and see how the trichomes look. A lot of the fan leaves look like they’ve got a nitrogen deficiency maybe a slight bit of calcium too but being so late in flower I don’t think I need to worry about it. Very excited to see the changes as she finishes up! Any advice is greatly appreciated! Stay safe happy growing😎🍁 Edit: I’ve now started feeding her plain water. I gave her 2L of filtered ph 6.1 excited to see how she reacts to it.
Likes
25
Share
@JonnyKush
Follow
hello growmies! day 51 finally the pre-flowers begin to appear. I apologize for the few photos but unfortunately they really filled the box and I find it difficult. overall I have to say they look in perfect shape! I will keep you updated thanks for passing by. like and comment! good day and beautiful growth to you 🌳🌱
Likes
6
Share
@CalGonJim
Follow
1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY EDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂
Likes
2
Share
Likes
3
Share
@Ninjabuds
Follow
Divine jelly has some really pretty leaves and some super thick stems. Some of the smaller branch’s I cut off because the main 4 were so much taller and thicker. Ok structure But I’m looking for strains that stack a lot better
Likes
8
Share
@DimJesus
Follow
Elas crescem tão rápido 😅 Ainda estão esticando um pouco mas somente os top buds. A da estufa pequena está aparentemente mais gorda e os pistilhos são maiores, já a que tá mais perto do zíper na estufa grande parece ter buds menores só que mais densos e mais bonitos, com muitos botões, já a que tá atrás dela parece ter buds mais alongados, bastantes pistilhos igual a outra só que muito mais alongados. A da estufa menor tá mostrando sinais de exceso de potasio, Acho que é isso por conta da cor das manchas nas folhas, acredito que seja da última rega que fiz pq eu coloquei bastante astro flower e o regulados de PH também é potasio, a última rega que fiz foi sem ferts e a próxima também, já consegui diminuir bastante a concentração de nitrogênio, acho que o verde já não está tão escuro e as pontas das folhas dobrando para cima de volta, acho que eu poderia ter colocado menos fertilizantes na última rega mas eu queria muito atingir os 1.000 ppm, as da estufa grande parecem estar gostando bastante da concentração e até agora não tem sinais claros de toxidade, somente a que tá sozinha tem manchas meio roxas em algumas folhas, fora algumas queimaduras amarelas por causa do nitrogênio que já resolvi. Eu acho que a diferença de tamanho nos buds é por causa da altura que o painel tava, então preferi sacrificar a temperatura e descer o painel até um palmo de altura e aumentar a potência, espero que valha a pena, acredito que o PPFD tá batendo 1.000 no ponto mais alto, o painel da estufa pequena sempre esteve baixo e na verdade eu tive que subir uns 8 cm mas o driver fica fora da estufa e por ser de apenas 65w ele não esquenta tanto assim, já o da estufa grande é um painel de 180w (funciona a aproximadamente 80% da potência pq é muito quente e gasta bastante energia 😭) que esquenta bastante e o driver fica dentro da estufa e faz ficar mais quentes ainda. Acho que o painel estar perto foi uma vantagem que a outra sempre teve mas não consigo saber pq ela tem tanto sinal de toxidade e as outras não, mesma água e quantidade de ferts, enfim, continuo aprendendo bastante com essa safra e planejando melhor o que farei nas próximas, ter 3 plantas da mesma genética e todas serem diferentes uma da outra é muito bonito, não somente a diferença aparente como também a diferença de necesidades. 💚🌱
Likes
12
Share
Plantas saudáveis, ótima qualidade, estão reagindo muito bem a alimentação, regas todos os dias e alimentação todos os dias,.cheiro doce
Likes
33
Share
@SAC87
Follow
Week 1: All the seeds popped within 4-5 days. Everything is looking good and they are all happy. I moved them into the 2x4 tent with a Mars 300 led. I’ve sprayed daily with plain water with a couple drops of voodoo juice. They are all starting on their first set of leaves. Nothing much going on at this moment. Happy Growing 🌱
Processing
Likes
36
Share
She started popping pistils. She just got into preflowering let's see how she does. Day 40 flushed her with ph balanced water to remove the salt build up Day 42: Had an accident today tho she recovering and she's totally droopy. Day 44: Thank God She has started stretching again
Likes
8
Share