Likes
Comments
Share
Small amount of lst and nothing much else to report.
Likes
8
Share
@Mr_Terps
Follow
Smashberry Fumez unter der Nanolux SN630 – Volle Power im 12/12 Lichtzyklus Gesponsert von Growshop Dampf Mit Stil Der aktuelle Grow-Report von Smashberry Fumez zeigt beeindruckende Ergebnisse unter der Nanolux SN630. Diese leistungsstarke 630W-LED sorgt für kräftiges Wachstum und eine optimale Lichtverteilung. In einem 12/12-Lichtzyklus entfalten die Pflanzen ihr volles Potenzial, indem sie direkt in die Blütephase übergehen. Highlights des Grows: ✅ Kompaktes Wachstum mit dichten Internodien ✅ Gesunde, kräftige Blätter dank optimaler Licht- und Nährstoffversorgung ✅ Starke Harzproduktion schon in den frühen Blütestadien ✅ Intensive Terpene, die bereits jetzt vielversprechend duften Die Kombination aus hochwertiger Genetik (Anesia Seeds) und einer effizienten Lichtquelle (Nanolux SN630) liefert hier herausragende Ergebnisse. Dank der Unterstützung von Growshop Dampf Mit Stil stehen alle nötigen Produkte, Nährstoffe und Equipment für ein erfolgreiches Grow-Erlebnis zur Verfügung. Schaut bei Dampf Mit Stil vorbei und holt euch das beste Equipment für euren nächsten Grow!
Likes
10
Share
Day 34 this lady is running, I can see flowers getting bigger every day, smell started really really soon this time so I already had to add the Carbon Filter. I’d like to close the cycle in less then 80 days. It would be great First flowering fertilisation Ph 6.2 Ppm 631 Day 37 - 9 of flower 🌸 Started blooming fertilisation, I’m keep Giving all-in one from aptus, i think I lm substitute with super pk and I stop all in one. Ph 6.2 Ppm 731 As I’m growing an solito in a 9.2 lt pots with all mix nutrients I’m slowing down with all in one and just giving base feedings, I ll decide later if I should give super-pk for the next weeks Day 40, tomorrow will be feeding days. Sge’s going really well, resin is already showing up on flowers that are several as and colorfull, smell is already there 🤤 Tomorrow update with feedings parameters. Day 41 feeding day Aptus regulator 0,15ml/1 lt Aptus all in one 1,25ml/1lt Aptus Topbooster 0,3 ml Aptus enzym + 0,5 ml Calmag 0,3 ml /L Ph 6,18 Ppm 756 Let’s see
Processing
Likes
11
Share
Managed to sex out the males this week, especially easy since the girls were putting out some pre-flower pistils. Moved others around a little using my potato fork and now everyone is in a much better spacing. Bummer that 2 out of 3 were males, but that's ok! The ladies that are left will have more room to stretch. I gave them a little Big Bloom and some molasses.
Likes
20
Share
Vamos familia que ya actualizamos la cosecha de estas lava Cake de Zamnesia . Y es que me han sorprendido para bien , vaya flores que se han marcado repletas de tricomas y las flores se marcan aromas dulces Temperaturas máximas en 28 y mínimas en 25 y una humedad estable en torno al 36%. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Espero que lo disfrutéis, buenos humos 💨💨💨
Likes
19
Share
The Afghan is a show off. The buds so far are growing strong for 21 day’s of flowering. No worries with this strain as she takes defoliation very good.
Likes
7
Share
They’re growing like crazy, right in front of my eyes 🌱👀💨 Every day: more power, more vibe, more respect 😤🔥 Dropped a few big leaves so all the energy goes straight to the flowers 🌸💪 This ain’t just growing… this is building an empire 😈👑 One running in sativa mode ☀️⚡ The other in indica mode 🌙😌 This is not the end… This is only the beginning 😎🚀🌿
Likes
19
Share
@Haoss
Follow
I gave this beautiful girl LST and defoliation, let's see how she copes with the sters, She feels good
Likes
25
Share
Permanent Marker weed strain possesses the genetics for high anthocyanin production, which is responsible for its signature deep purple. While the genes are present, the expression of these colors is often enhanced by "thermal stress" (lower temperatures) during the final three weeks of flowering, which triggers the production of these pigments. 👋 Raising the Carbon-to-Nitrogen (C:N) ratio in the growing medium to avoid over-immobilizing nitrogen, on the flip side, being careful not to trigger early autophagy. Moderate, controlled increases in sugar support the energetic demands of flowering and act as a signal trigger, but excess sugar is more likely to inhibit flowering or damage the plant. Balance, like everything else. Visually, when the chloryphyll green gets darker, it is a subtle indicator that the concentration of nitrogen is increasing / more is being stored than is being used. I noticed when you push very high intensity lighting, it slowly fades the green as the plant degrades chloryphyll faster than it can be replenished. When the green of the leaf continually gets darker, it is an indication that the concentration levels of nitrogen are increasing, and I dont want to increase light intensity. Turn down the nitrogen faucet. C:N ratio dictates the rate at which nitrification occurs, if at all. The Carbon-to-Nitrogen (C:N) ratio acts as a critical biological "on/off switch" (or regulator) for nitrogen turnover by determining whether microbes immobilize (consume/tie up) or mineralize (release) nitrogen during the breakdown of organic matter. This ratio regulates microbial activity by defining the balance between available energy (carbon) and building materials (nitrogen). The C:N ratio in a medium acts as a critical regulator of nitrification, effectively functioning as an "on/off" switch for the dominance of either autotrophic nitrifying bacteria or heterotrophic bacteria. The shade of green in chlorophyll is subtly linked to the enzyme Rubisco through a co-evolutionary, functional relationship designed to optimize photosynthesis. Chlorophyll absorbs blue and red light for energy, reflecting green light, a process that ensures the "light-dependent" reactions provide the correct, controlled amount of energy (ATP and NADPH) needed by Rubisco to perform its "light-independent" carbon fixation. Because Rubisco is a relatively inefficient and slow enzyme—often considered the bottleneck of photosynthesis—chlorophyll and the overall structure of the leaf have evolved to manage energy distribution to prevent overwhelming the Calvin cycle. While chlorophyll absorbs mainly red and blue light, it is not perfectly efficient, and leaves appear green because some green light is reflected or transmitted. This reflection allows light to penetrate deeper into the leaf, preventing the surface chloroplasts from becoming overloaded and enabling a more efficient distribution of energy to the high volume of Rubisco located throughout the leaf's mesophyll. The rate of chlorophyll-driven electron transport (light reactions) is matched to the potential rate of carbon fixation (Rubisco activity). If Rubisco were faster, leaves might be darker; however, the "shade of green" represents a balance that prevents chlorophyll from producing more energy than the inefficient Rubisco can process. The green color itself is a byproduct of a photosynthetic system tailored to feed a slow, yet crucial, enzyme (Rubisco) just enough energy to maximize carbon assimilation without inducing excessive oxidative stress or inefficiency. The shade of green in leaves is directly linked to the concentration of chlorophyll, which is in turn strongly correlated with the amount of Rubisco (Ribulose-1,5-bisphosphate carboxylase/oxygenase) and, consequently, the rate of carbon fixation. Darker green leaves generally indicate a higher concentration of both chlorophyll and Rubisco, signifying greater capacity for photosynthesis. Increase output or reduce input. Subtle tells. While an excess of nitrogen (specifically ammonium) can cause an imbalance, nitrification—the microbial conversion of ammonia to nitrate—is highly sensitive to a variety of environmental, chemical, and physical factors. Because it depends on specific, slow-growing bacteria (Nitrosomonas and Nitrobacter) and archaea, anything that stresses these organisms can disrupt the process.
Likes
28
Share
Sorry for the late post had a very busy period. The buds are great, good feedback from patients. First time I've been able to taste a fully organic bud and I can say I won't be going back!
Likes
10
Share
@MG2009
Follow
08/27/2021 Been 7 days since last pictures. Pheno #4 was eliminated do to the fact she reversed (hermied) I believe that an outside light was at fault. ( lemon Thai) genetics maybe coming through. Others have not really been affected but pheno #2,3 may have been delayed a bit but no sign of hermies just not as developed as pheno #1(Hulk). Going to mix up a flowering tea (AACT) fungal dominant. Also topdress with Gypsum, and Diatomatious Earth before tea is applied. Gypsum Gypsum is calcium sulfate (CaSO4). Refined gypsum in the anhydrite form (no water) is 29.4 percent calcium (Ca) and 23.5 percent sulfur (S). Usually, gypsum has water associated in the molecular structure (CaSO4·2H2O) and is approximately 23.3 percent Ca and 18.5 percent S (plaster of paris). Diatomatious Earth Diatomaceous earth is a mineral-based pesticide and its composition is approximately 3 percent magnesium, 5 percent sodium, 2 percent iron, 19 percent calcium and 33 percent silicon, along with several other trace minerals 08/29/2021 Posted close ups of Hulk.
Likes
11
Share
I should have used a net as they are starting to fall over! Next time 😅
Likes
15
Share
@PiusWaxis
Follow
Here we are at the end of my plant's wonderful eleventh week of flowering, another week full of exciting developments and new discoveries. The constant and unstoppable growth of the plant has come to an end, showing a beauty and vitality that are a true spectacle for the eyes. 😎 The abundant layer of resin that has formed is a clear sign of the health and well-being of the plant, once again confirming the benefits of the premium nutrients used throughout the entire growth cycle. TrollMaster's "TENT-X" environmental control system continues to prove its worth, precisely maintaining optimal temperature and humidity levels to promote vigorous plant growth. The combination of advanced and precision technologies ensures that plants can thrive in a controlled and conducive environment😎 I am thrilled to share with you the latest video showing the temperature, humidity and VPD trends of this last week of flowering, providing further demonstration of the extraordinary performance of the TrollMaster control system and its synergy with the other elements of the grow room.With each week that passes, the anticipation for the new discoveries and challenges that await us continues to grow. With the constant support of Plagron nutrients, trust in the TrollMaster control system and the excellence of MEDIC GROW LED lighting, I am sure that I am always ready to face any challenge! Thank you again for being by my side in this extraordinary adventure, dedicated to exploring the wonders of plant cultivation. Together we continue to look to the future with confidence and enthusiastically anticipate the successes that each new week holds for us. 💪👽🌱✨ REVIEW TENT-X: I was pleasantly surprised by the effectiveness and functionality of the TROL MASTER! This device is simply amazing, as it has allowed me to monitor the environments I use it in accurately and efficiently. One of the most impressive features of this device is its ability to operate LED lights easily and intuitively. Thanks to its user-friendly interface, I could easily customize the lighting of my rooms according to my tastes and different situations. I particularly appreciated the possibility of programming the sunrise/sunset simulation, thus creating a more natural situation.But that's not all: the device goes further and manages to keep me constantly informed about the humidity and temperature of the surrounding environment. This feature has proven to be very useful, especially in times when I am not present. I was able to set humidity limits, so that the device would immediately alert me if the levels exceeded the desired threshold. This allowed me to intervene promptly and avoid excessive oscillations. The accuracy of the temperature measurements was another welcome surprise. The device is equipped with a high precision sensor that allows me to constantly monitor the temperature of the rooms. Here too I was able to set temperature limits, allowing me to be notified immediately if they were exceeded. Overall, I was really satisfied. The TENT-X exceeded all my expectations. Its ease of use, precision of measurements and possibility of customization make it an indispensable tool for those seeking to monitor and optimize environmental conditions.
Likes
18
Share
Week 14 water change Wednesday 3/6/20 Last (3 weeks) ph5.3 ppm1050 New 100L ph7.1 ec0.2/ppm100 22c 20ml sil ph9.2 ec0.3/ppm150 22c Roots 150ml ph8.8 ec0.3/ppm150 Ph dwn 6ml ph5.9 ec0.3/150ppm 22c B1 600ml (6ml/l) ph5.6 ec/650ppm 22c A1 600ml ph5.6 ec/1000ppm 23c Thursday 4/6/20 ph5.9 1050ppm 23
Likes
24
Share
@Doubleb84
Follow
Running into some rookie mistakes with PH and nutrients 😫. Getting her healthy again with help from friends though! Love this light so much!!
Likes
6
Share
Plant has recovered from training a further defoliation. Topped the high branches as they are approaching the top of the greenhouse.