Gracias al equipo de Herbies Seeds, Marshydro y XpertNutrients sin ellos esto no seria posible. 💐🍁 Runtz Punch: Runtz Punch no es una cepa para personas de mente superficial, está hecha para reflexiones filosóficas, euforia dichosa y un gran subidón corporal a la hora de dormir. Es la cepa perfecta para romper la tolerancia en cualquier fumador experimentado. ¿Cuál es su secreto? Esta cepa tiene un gran impacto con un 29% (sí, 29%) de THC. Es mejor reservarla para noches de ensueño bajo las estrellas, deja que tu mente divague mientras tu cuerpo absorbe todas las cualidades terapéuticas que tanto necesita. 🚀 Consigue aqui tus semillas: https://herbiesheadshop.com/cannabis-seeds/runtz-punch-herbies-seeds 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 11: Finalmente estoy contento con los resultados pese al error que tuve con el temporizador, lavado de raíces para esta maravilla y corte final en una semana.

Hello growers! Tonns of defoliation and branch management this week. I added 2nd pack of stretching wires I actually don't know how to manage THAT amount of branches Shall we count this stage as a flower or veg. Well, it's transitioning At the beginning of the week PPM was 1040, by the end it's 1700+ It's hard to maintain correct level, when we add water, not changing it, i wanted to add more bloom nutrients. And she dinks well now.

Week 4 Veg Report: Croco Girls - The Mutant Chronicles 🌱 Hello Grow Fam! Week 4 of veg is here, and what a unique and eventful week it has been for the Croco girls! These funky mutants continue to surprise and amaze with their one-of-a-kind growth patterns. While the colder weather has introduced a few challenges, we’re adapting and thriving together. Let’s dive into the details! Environmental Updates: A Chill in the Air 🌬️ This week, temperatures in the grow room dipped to around 21-22°C, with relative humidity (RH) holding steady at 65%. While not drastic, this slight chill is enough to slow down growth a bit as the plants adapt. Cooler temps can encourage tighter node spacing, but they can also delay development slightly. Here’s how we’re addressing it: Proactive Monitoring: Keeping a close eye on temperature and RH trends to ensure they remain within optimal ranges. Gradual Adjustments: Slowly warming the environment with indirect heat sources if necessary, without shocking the plants. Remember, plants are incredibly resilient—and this slight delay will only make the Croco girls’ eventual growth even more rewarding. Feeding Updates: All in One Pellets & Organic Boost 🌾 This week marked a significant milestone: I introduced Aptus Holland’s All in One Pellets to the soil mix. Here’s how it went down: Preparation: Added a generous dose of the pellets to each pot. Soil Enrichment: Topped the pots with Pro Mix soil, bringing the total soil volume to 1 liter per plant. Feeding Transition: While I did one last watering with All in One Liquid, I’ll now rely primarily on: Regulator (0.15ml/L): To support stress resistance and strengthen cell walls. CalMag Boost (0.25ml/L): For calcium and magnesium supplementation, essential for strong stems and vibrant growth. Start Booster (0.25ml/L): To continue promoting robust root development. The combination of organic pellets and the Aptus liquid lineup ensures the girls have everything they need for a slow, steady nutrient release while maintaining microbial activity in the soil. Watering Technique: Bottom-Up Hydration 💧 This week, I switched to bottom-watering, a game-changer in preventing fungus gnats and promoting healthier root development. How It Works: Water is added to the tray, allowing the soil to wick moisture upwards through capillary action. Advantages: Reduces surface moisture, deterring gnats from laying eggs. Encourages roots to grow deeper as they seek water, resulting in a stronger root system. To further combat gnats, I’ve also placed yellow sticky traps around the pots. This dual strategy—bottom-watering and sticky traps—is already showing promising results. Mutant Marvels: The Funky Leaf Phenomenon 🍃 Each Croco girl is a masterpiece of mutation, with unique leaf shapes and growth patterns. No two plants are alike, and that individuality is part of what makes this grow so exciting. I’m patiently waiting for them to grow large enough to identify their sex. Here’s the plan moving forward: Option 1: Flip to 12/12 Temporarily: A one-week light flip to identify sex, then returning to veg. Pros: Fast and straightforward. Cons: Slight delay in veg growth. Option 2: Clone & Flip: Take cuttings from each plant, root them, and flip the clones to flower. Pros: Preserves the main plants in veg. Cons: Requires additional space and time for cloning. I’ll decide based on how the girls progress over the next week or two. Either way, I’m excited to unlock their potential. Photography: Capturing the Magic 📸 This week, I focused on showcasing the Croco girls’ beauty through a mix of macro photography and behind-the-scenes shots. Using both my Sony and Nikon cameras, I’ve been able to capture intricate details—from water droplet reflections to the delicate veining in their leaves. Why Use a DSLR/Mirrorless Camera? Greater sensor size allows for higher-quality images compared to even the latest smartphones. The ability to swap lenses provides flexibility for macro shots, wide angles, and close-ups. Depth of field and manual focus control ensure every shot is intentional and artistic. Lens Choices: Macro lenses (e.g., 90mm) for close-ups of leaf textures and water droplets. Standard lenses (e.g., 50mm) for portrait-style plant shots. While phone cameras like the latest iPhone can take great photos, they can’t quite match the level of detail, depth, and creative control a dedicated camera offers. Shoutouts & Gratitude 🙌 As always, a massive thank you to: Terpyz Mutant Genetics for these one-of-a-kind Croco seeds. Aptus Holland for their exceptional organic-mineral nutrients. Pro Mix for the reliable soil base. Future of Grow for their stellar LED lights. TrolMaster for keeping the environment dialed in. Grow Diaries for being an amazing platform to share this journey. The Grow Community for your endless support and love—haters and lovers alike, you’re all part of this adventure! Join the Journey 🌱 Be sure to check out my Instagram and YouTube for more behind-the-scenes action, including videos showcasing how these photos and macro shots were taken. Let’s grow together and keep inspiring each other with creativity and positivity! Until next week, stay green, stay growing, and remember—every mutant is a masterpiece in its own right. 🌟 Let’s grow, let’s grow, let’s grow! 💚 Grower’s Love, 💚 Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚

Got the Spider Farmer wicking system set up with a reservoir. Up until now I’ve been using purchased pure water since it came with a better starting pH than my tap. After running the numbers, the cost of hauling jugs didn’t make sense long term. I ended up grabbing an RV water inline filter for the garden hose, which strips out most of the chlorine and other contaminants I was worried about. Goal was mostly a stable water source because the girls are getting thirsty; I still prefer hand-watering to wet and activate the top dress. Access is only from one side of the 5×5, so as they bulk up I’m learning the back two are a chore to reach. The wicking pads help keep things even between rounds, but I’m still going in by hand to finish the job. Did a defoliation pass; airflow and light paths improved, but I may need to push it a bit further because I don’t want a lot of larf. Crazy how much plant material I pulled off but they seem fine. Light feels like the current yield limiter. The SF4000 is solid but a touch undersized for full 5×5 penetration, the lower canopy isn’t getting what I want. I’m eyeing a higher-wattage bar style light for better edge uniformity and deeper PAR at canopy. I’ve been testing edge light saturation with the SpiderF PPFD sensor at canopy height. Center readings are strong but the corners and long edges are clearly lacking. Smaller tent or smaller plants another option maybe. Im at 100% on my light and will be for the rest of the grow just raising it to keep distance. Plants look happy overall. The Durban Cookies is standing out, taller and more vigorous than the 10th Planets especially for being a week younger than the rest. I am guessing it will be harvested first just by stretch speed alone. The 10th Planets R1s all have a pretty even canopy going but showing stretch. Wicking system + hand-water combo is keeping the media right where I want it, and the top dress from last week is kicking in. Reminding everyone this is my first grow. Hoping for a pound dry, but I won’t be greedy. Keeping my expectations realistic! Thanks for following along.

Giovedi 3/11/2022 Cambio acqua, inizio controllo Ec 2200 Ph 5 60 lt demineralizzata 6 lt rubinetto Ec 289 56 Grow 112 Micro 168 Bloom 66 Enizmi 70gr mega bud Ottenendo Ec 2184 Ph 5.9

Nice developing, no big problems.

Nothing new, i will add commentary later in the week. Edit: Everything seems nice and cool, 2 of the plants are just growing 4th node, 2 of the plants are growing 5th. Tommorow i will top for the first time. I will add video of that. Day 16 - I increased the light intensity from 40% to 50%. Day 17 - I watered with increased dosage, 750 ml per plant. I kept voodoo juice in becouse i wanted to make sure of establishing good rhizobial colonies (root bacterias that are prosperous for your plant - don't be afraid to ask any informations in the comments), the bacterias need food to stay alive and i started in 20 liter pots with small amount of water volumes per feed, so to make sure there will be some in the future i kept it there in the first bigger feed batch of this run. Day 18 - topping(kinda fimming) above 4th node. Bending plants to the ground using rubber covered wire by AC Infinity. Adding video of topping. Also, when topping, i clean scissors in denatured alcohol (technical ethanol) after every plant - every detail matters, don't risk spreading any disease, these can be brought even in the seeds!

Day 33 after 12/12

Week 10 Week 3 of Flower Well … bud sites are on the scene. I love the nice open structure of this plant. The stretch has been pretty wild! She is being a bit crowded to the back of the tent now because of the explosive growth of her tent mate (Mimosa EVO). I can’t wait to see this lady stack on bud now. 😎🔥 Cooler internals: 600 ppm 1.2EC 5.9pH-6.1 (it swings a bit over 3 days) 65 F Solution Temp. Onward 😎🍻

It was a rough week for the girl. We had bad weather this past week very high humidity and lots of rain. I also dealt with some powdery white mold which I was able to get under control by using baking soda and water and removing lots of leaves. The buds are much more dense and the trichomes are starting to turn milky. Ideally I would have liked to keep this plant in the ground one more week but we have more nasty weather coming so I will be most likely be pulling this girl in the next three days. It has been about 11 days since I have given her any nutrients and she has received a lot of rain water. I pulled some of the lower branch when I found the PWM just in-case and I have those dry right now.

first I shed the substrate with 400-500 ppm feeding short fertilizer The seed is sent to a glass of water 200ml / 6.5ph / 200ppm for 12 hours after - the seed is sent to wet cotton pads for 2-3 days

Beginning of week.. I went up a tad on the nutes today.. And went down on the light power last week.. It was about 65% - 70% power which was quite a bit, I guess.. I put it at 50% power and she is finally starting to get some height to her.. I noticed more pistils toward the very top. I really hope she doesn't start flowering too soon.. I'd like to get some LST done on her. But she is happy and healthy! Next day... Even more pistils! Its been awhile since I grew an auto.. So I kinda forgot how early pistils can start poppin out but still be in veg (preflower). I just really wanna turn this girl into a flat bush! 10 mins later... Ok.. So looking back at my other autos.. This is pretty typical for them to start showing preflower this early.. She should still have 2 or 3 more weeks of veg with preflower! Mid week.. This is a day early.. But close enough.. 3rd week and growth is beginning to explode! The very first node's branches aren't really doing much.. Plus they are damn near to the ground.. I'm wondering if I should just remove them.. Maybe not yet.. But soon.. Or when I finally apply some LST. She is doing great!... No deficiencies.. No excesses.. Autoflowers are a trip! Can't wait to see what she looks like in another 7 days! I wanna try to do the entire grow without removing much, if anything.. But if this bottom branch doesnt start doing something.. I'm gonna have to remove it.. Its just bothering me way too much lol. Actually mid week.. SoI have been noticing a little bit of clawing and darkness.. BUT ONLY on the new growth.. As the leaves get older they seem to straighten out and lighten up a bit.. But I'm pretty sure it's nitrogen toxicity.. So I went down from .66mL/L to .33mL/L.. I use 3L to water daily.. So basically 1mL per feeding of all the base nutrients and the CalMag.. The Floralicious Plus has a bit of nitrogen too so I went down a tad on that as well. I read someone else's grow that says these girls are a bit sensitive to nitrogen.. So that's where I'm at now. Flushed this morning, and now for a small feed tomorrow morning. Will be updating with pics at the end of this week. Later that night.. Went ahead and flushed with just 2L of pH'd water.. Going in - pH: 6.3 PPM: 240.. Runoff - pH: 6.1 PPM: 640... So the PPM is still a bit high, but during the feed tomorrow, it should go down some still.. I should have ALOT of runoff tomorrow. I had the same amount I normally do when I use 3L just from these 2L.. Just cuz its 12 hours early.. The medium was still nice and moist.. And will still be in the AM for the next fertigation. Next day... Waking up this morning, I found that the oldest set of leaves that had been clawed cleared up.. For the most part.. Still dark asf.. But not as much clawing..the newest set were still clawed tho.. Which is understandable.. I made 3L of nutes.. Only used 2L in the AM.. Going in pH: 6.3.. PPM: 420... Runoff pH: 6.2.. PPM: 480... Not bad.. And I still have 1L left over which I am going to have to give her later today.. And will update with the runoff info also. Some say not to worry about the runoff pH.. But I think that is only because when people see it really low, they tend to give make the nutes waaay too high in order to combat the low runoff.. I just make my nutes 6.5 till ai see the runoff coming out at the area that works best for my grows.. Which is 6.2 or 6.3.. Let me explain why I use 6.2 to 6.3... My first 2 grows in coco I was using 5.8 to 6.0.. It worked well in veg but it was only during the transition and beginning of flower that I had calcium defeciency.. GWE website said that in hydroponics/coco that calcium is best absorbed at 6.3 or so.. So ever since I've just ran my girls at 6.2 or 6.3.. No lower, no higher.. The entire grow.. And haven't had any issues with deficiencies since! So that is MY sweet spot.. I may let it drift to 6.1 or 6.4.. But I try not to, for the most part. Later that night... I went ahead and did 1L of pH'd water first.. Then did the 1L of nutrient water.. Runoff came out at 420 PPM 6.2 pH... Nice... Also, I went ahead and ponytailed the top and pulled some of the longer branches on top of the fan leaves.. I'm only going to keep it ponytailed for the rest of the day (6 hours left of lights on).. Never tried this before, but with these super fat indica leaves blocking literally every branch.. I figured it couldn't hurt to give it a try. I may do it for another 6 hours tomorrow.. But I havent thought that far into it yet. I just want her and her branches to be long enough to begin some LST by the beginning of next week.. And already more than halfway through this week. Happy with the way things are going, for the most part... Almost end of week.. Ponytailed her again for another 6 hours this morning.. Just trying to give the side branches a little head start before the LST next week. End of week.. Welp.. I couldn't wait one more day to apply some LST.. I went ahead and did it today.. I also removed the bottom node, leaves and branches.. They were weak branches and I figured I could get them to take root and breed some seeds with them using Collidail Silver method! I really like how these branches have grown on this girl! It's like they already grew into a lollipop!!! Still only using the light at 50% power.. Which is helping keep the temps down a bit... Niceeee... I haven't defoliated anything (except the bottom node due to very weak branches and horrible looking leaves.. Which I'm guessing is because they were so low, possibly getting nutrient water on them during watering) but again, cloning those to breed with! She has completely exploded this week! Very happy with this girl! On to the next week!!!...

This week was an absolute nightmare. For five days straight, our residual-current circuit breaker (RCD) kept tripping multiple times a day until I finally discovered—regretfully—that the dehumidifier was the cause. As a result, the ladies will now have to go without a dehumidifier for an indefinite period, which is leading to very high humidity levels in the basement. Besides that the Merengon looks awesome and healthy! Light hits with around 600 PPFD

Big week here. Got the girls transplanted to their 7 gallon pots. First time with pots this big. Gonna really let them grow. Got a little water with BT and mycorrhiza.

Day 58 - Starting week 9 and she’s filling in nicely and showing some gorgeous frost. She’s gonna be ready for water tomorrow and will probably give her a dose of nutes. Nothing much else happening, she’s pretty much taking care of herself. Day 59 - Gave her 2 gallons of water and nutes today and all looks good with her. She’s filling in nicely and starting to put out a nice fruity kind of smell. Other than that, not much else happening. Day 60 - All looks well after watering yesterday and love watching her fattening up each day. Getting nice and frost too, not much else really happening. Day 61 - Still packing on the buds and looks great, she’s got a nice pinkish color to her right now. She’s just about ready for water so will juice her up tomorrow. Day 62 - Not much to update today other than I gave her two gallons of plain pH’d water this evening. She’s really filling in quite a bit each day and haven’t really had any issues with her so far.

Woche 5

Purtroppo causa infestazione di insetti le piante hanno avuto una vegetativa lenta e di conseguenza sono entrate in fioritura che erano alte 20cm.Penso che la mia avventura con le autofiorenti termina qua. Piante troppo delicate. Bisogna essere perfetti i primi 20/25 giorni e probabilmente non lo sono ancora.Si torna alle femmine per ora e in futuro si partirà da semi regolari di banche semi serie!!! Alla prossima 🖐️

first time grower,random seed in a bag of local bush weed,it seems to be doing ok,signs of little hairs growing on nodes so im gathering its starting to flowet started off with 5% nitrogen for 2 weeks at 1.5ltr per day then went up to 10% nitrogen on same water cycle for 4 weeks now using 9% nitrogen but have upped the P and the K for flowering stage soil is sandy underneath so drains very well,typical western australia sandy soil https://youtu.be/4bxFg8IivZo

🇩🇪 Alles sieht großartig aus! Der Geruch ist sehr fruchtig und intensiv, die Buds sind schön angeschwollen und steinhart. Noch ein/zwei Wochen, dann wird sie zwei dunkel gestellt, um nochmal das letzte rauszuholen. 🇺🇸 Everything looks great! The smell is very fruity and intense, the buds are nicely swollen and rock-hard. Just one or two more weeks, then I’ll put her in the dark for a bit to get the last bit out. 🇪🇸 ¡Todo se ve genial! El aroma es muy afrutado e intenso, los brotes están bien hinchados y duros como una roca. Solo una o dos semanas más, luego la pondré en la oscuridad un poco para sacar lo último.