They got fed FLOWER as a nutrient tea, the lights are now full blast (on 10), and very little trimming was needed this week. There is very little growth upwards. They are the same height as last week. These ladies are looking great! 😍 The buds have big pistols (hairs)! They are getting covered in trichomes all around the buds, and forming loose colas. They seem like they are close to finishing?? Oh, AND they smell strongly of terpentine and that blue dream smell!

Going really well really happy with how the ladies have grown and how they are developing I seem to be getting taller plants back side of the tent I can only put this down to changing light to more powerful one but they all seem to be happy and doing great

Ill have to update the final results in 4 weeks. Plants are still drying and I gave it my best guess.

Been slack with the updates as we are busy buidling a new greenhouse. will make sure I take nice individual photos for harvest though.

Gorilla Glue Auto Day 89 This week I continue watering with 1.5 litres of water and nutrients every other day. I continue to remove leaves that are obstructing the flowers. The flowers continue to swell. When I look through the magnifying glass the trichomes are some 50% clear, 50% cloudy, 0% amber. Next week I will change the watering schedule and reduce the nutrients!? Gorilla Glue #4 Week 10

Bud site popping up looking good . New nutrients in the mail hope in time for next feedings. New goodies came in the mail today. Gona try them. Only go use half the recommended amounts to.let the girls see how the like them scared to burn.

OG 4Q24 Flower Week 7 Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Jan 22, 2024 CR2 4Q24 43:F:6:1] End of Week: [Tue Jan 28, 2024 CR2 4Q24 49:F:6:7] OrangeGasm Fertigation: - MAX: EC: [ 2.4, mS] - LightIntensity MAX: [ 850, µMol/m2/s] ______________________________________ __ Wed Jan 22, 2025 OG 4Q24 43:F:6:1 - [x] R&R Each Drip Ring Assembly (Assure NO Fertigation/Bio Build up) Runoff - Amount: [ .5, l] - EC: [ 3.8, mS/cm] - EC∆: [ 1.2, mS/cm] # Danger! Refresh Res (Filtered, pH’d Tap Water) - [x] Amount: [ 2, gal] - [x] Primer A&B: [ 35, ml] - [x] SLF-100: [ 10, ml] __ Thu Jan 23, 2025 OG 4Q24 44:F:6:2 Refresh Res (Distilled Water, pH: 7, EC: 0.0) - [x] Amount: [ 2, gal] - [x] Primer A&B: [ 39, ml] - [x] SLF-100 Runoff - Amount: [ 1.2, gal] - EC: [ 4.3, mS/cm] - EC∆: [ 1.6, mS/cm] # DANGER __ Fri Jan 24, 2025 OG 4Q24 45:F:6:3 Runoff - Amount: [ 0.3, gal] - EC: [ 4.1, mS/cm] - EC∆: [ 1.4, mS/cm] # DANGER  __ Sat Jan 25, 2025 OG 4Q24 46:F:6:4 Dump Res - [x] Remove Chiller and Fertigation Pumps - [x] Dump and CLEAN Reservoir, Note Sediment - [x] Detach Main Feedline - [x] Clean Chiller Pump - [x] Clean Fertigation Pump - [x] Dry ALL Components - [x] REASSEMBLE When Dry - [x] Clean 1/2” Fertigation Mainline Watered In Primer A&B, CalMag Fuel, Silica Skin - Amount: [ 1.9, l] - EC: [ 2.7, mS/cm] Refresh Res w/ Full Hydro (Primer A&B, Silica Skin) - [x] Amount: [ 4, gal] - [x] EC: [ 2.7, mS/cm] - [x] Primer A & B: [ 73.1, ml] - [x] SLF-100: [ 40, ml] Runoff - Amount: [ 0.25, gal] - EC: [ 4.1, mS/cm] - EC∆: [ 1.4, mS/cm] # DANGER __ Sun Jan 26, 2025 OG 4Q24 47:F:6:5 Refresh Reservoir - 2 Gal, EC: 2.7 - [ ] Check, R&R Fertigation Manifold Filter as Needed - [x] SLF-100: [ 10, ml] - [x] Primer A & B: [ 40, ml] Runoff - Amount: [ 1.25, gal] - EC: [ 4.2, mS/cm] - EC∆: [ tbd, mS/cm] __ Mon Jan 27, 2025 OG 4Q24 48:F:6:6  Watered In Primer A&B, CalMag Fuel, Silica Skin - [x] Amount: [ 1.9, l] - [x] EC: [ 2.7, mS/cm] IPM - [x] Spray sides - cover Air holes of Airpot - [x] Spray tops of pots to drench - [x] Dr. Zymes, 28ml/quart @ 85°F - [x] APPLY Mosquito Bits to Top of Containers Runoff - [x] Amount: [ 1.5, gal] - [x] EC: [ 4.9., mS/cm] - [x] EC∆: [ 2.2, mS/cm] # *** Plants Should Be Fried! Need to R&R Pre-Filter again. Fan Flow significantly diminished. __ Tue Jan 28, 2025 OG 4Q24 49:F:6:7  Replace ACI Pre-Filter - [x] Remove Plants - [x] Disconnect Irrigation Emitters - [x] Remove and Rinse Drain Tray - [x] Drop Front of Light - [x] Remove & Replace Pre-Filter - [x] Verify Airflow (Make sure we don’t need to change the carbon in the filter) - [x] Raise front of light to run position - [x] Replace Drain Tray - Reposition Shims - [x] Replace Plants AS THEY WERE - [x] Replace Emitters - [x] Verify Irrigation Runoff - [x] Amount: [ 0.5, gal] - [x] EC: [ 4.8, mS/cm] - [x] EC∆: [ 2.6, mS/cm] # *** Plants Should Be Fried!

Hey everyone 😃. Another wonderful week is over and they are developing really well 👍😃. I think I'll put them in the flower chamber for about the next 2 weeks. until then I wish you all the best 😋 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

she's a beast and has grown really tall just hoping the buds will fill out in the next few weeks, I grew this strain a while back but it looked completley different to this and was half the size, maybe that was because it was grown in soil ??

💩Alrighty Then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are back to do it all over again 😁 So what do you say we have some fun 👈 We got some Gorilla Punch 👊 👊 👊 DAY 14 👉 Its been a really good week , lots of growth , just given water 💧 👌 Never the less we are moving along and so far so good folks👌 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍👉Added an RU45 too the mix 👍 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

I'm happy 🤤

Week 🌸

On day 1 the rez is at 6.2. The highest cola is 8.5" from the light. On day 2 the rez is at 6.2. The highest cola is 7.75" from the light. On day 3 the rez is at 6.1. The highest cola is 7.5" from the light. On day 4 the rez is at 6.3. The highest cola is 7.125" from the light. On day 5 the plants are smelling and doing well. On day 6 I changed out the rez and PH to 6.1. The highest cola is 7" from grow light stretch is deff slowing down and should be over shortly. My avg PPFD at canopy is around 800. On day 7 the rez ph is 6.0. The highest cola is still 7" away from light 😅 close but not too close in my small space.

No se cómo expresar mi felicidad después de casi 3 años sin poder cultivar consecutivamente he podido cosechar esta belleza gracias a @blacktunaco por la K.O una genética llena de resina con flores compactas. Cometiendo errores desde el principio se pudo obtener una excelente planta corrigiendo todo para así mejorar el aprendizaje continuo. Se dieron 12 días de lavado de raíz y 3 de estos estuvo expuesto a lluvia constante durante los 3 días por tal razón se decidió cosechar para evitar dañar las flores

these 2 girls have been a wonder an a half to grow. !! #2 is finishing alot faster than #1 but its about half way through flower and #2 has just taken off from the beginning rich thick colas with dense stinky purple nugs. #1 is a real tall with a few thick long colas really showing off her legs this one.🤙😁

📆 Week 12, 7-12 July 2024 Harvest 8 July - Turned light power down to 25%. Changed nutrient solution to RO water to begin flush. 11 July - Harvest 12 July - Begin curing time. 📑 Harvest time! She is ripe, danky, sticky, full of resin, solid, and I am pleasently suprised at the yield. This is not your ordinary Auto Afghan variety. She produces heavy buds and a lot of them. This is also the first auto I have grown using DWC in 12 weeks without manipulation - 18 hours straight from start to finish. I pushed her to the limit. Now she will hang in the closet at 50-55% RH and 70 degrees F, for about 7-10 days curing. Then she will trimmed and put into one quart glass mason jars, with 62% Boveda TurpShield and burped until 62% RH is maintained. The full potency potential and terp profile will be reached in about 30-45 days. 📆 19 July 2024 The Smoq Report: After 7 days of hanging, she was ready to cut. I trim and shape each individual bud, removing unwanted leaf and stem. It’s a process but worth it if you smoke bud. Her potency is evident. It will take the experienced smoker to a satisfying high and keep you there for a good hour or more before you want another hit. The smell and taste is of a typical Afghan. I was expecting a heavier yield, but in the end I guess we all hope for a little more! Maybe next grow! 🍶 Nutrient solution changed to RO water 💧 Using reverse osmosis water with EC/TDS at 0 🔆 Light power at 25%, DLI 20 canopy coverage at 18hrs 😤 Using PYPABL, Air Pump, 400GPH That is it for this grow. Thanks for following, reading and stopping by.