Forgot to water for a few days, and she got quite crispy. Halfway to dry even I'd say. Not looking forward to this trim.

2 of 3 plants are females, Others are still unknown, females r hst ed and topped. I will repaet training with fimming after stress. 1 of them is a male ruderalis, I took him from the pot he lost around %95 of his roots but still alive and moved in quarantin to harvest his pollens to cross new combinations for the future, I broke a flowered stem :( and I dont want to say good bye to that small piece so I will try to make a clone with it, the chance will be less because of her flowers also I have not root hormon so the only chance is aloa vera gel and honey to protect her from infection . 2 fresh cuts from topped girls and 1 broken stem are in a box now (which they borned in it, the destiny :)) . Looking a chance to survive, Im supporting them with foilar spraying 2 or 3 times a day which includes B52 and Revive. Good luck girls God bless u,

Cal mag deffeciency. No problem I knew I would run Into it using soil nutes. Some rapid growth on most sherberts. Pink kush Is more stubborn and difficult but one of them seem to be thriving. Not sure why most pink kushs are just a bit slower. The seeds also seemed to NOT be germinating as fast as all the other strains. This is some really solid genetics so far with some rapid growth to them. Scrog installed 20 - 23 cm above the highest point of the pots. I will just them grow into the scrog and then train them into the trellis. I might raise the lights so they can stretch just a bit. Call mag issue was fixed very fast changing to Coco nutrients and i have some really healthy growth now at the end of week 4

Day 64 - Starting week 10 and haven’t really had any issues so far. She’s definitely a lengthy girl and hoping the bud development will catch up to her soon. She’s frosty as hell all over and it’s looking like she’s gonna need some water and nutes in the next day or two. Day 65 - Gave the girl 2 gallons of water and nutes today and she’s still chugging along nicely. She’s still budding nicely but not sure how well she’s going to develop them with how lengthy and spacing between everything but I’m sure things will work just fine. Day 66 - Everything is going good with girl still. She’ll have some more room to stretch outward come this weekend when I chop a plant. Other than that just watching her buds frost over and grow. She’s a bit behind with the watering schedule but will still be getting some by Wednesday. Day 67 - All still looking good and buds are still forming and fattening. Definitely getting nice and frosty all over and she’s smelling amazing. She won’t be needing any water tomorrow like my other two but should be ready on Wednesday. Other than that, just keeping the leaves tucked to keep her as opened as possible. Day 68 - I thought she still had some time before giving her water and nutes but she was dry today and gave her 2 gallons. She’s got more room to stretch out now that I put my Cherry Cookies into 72 hours of darkness. Day 69 - Nearing the end of week 10 and everything is going great. She’s good on water for a few days and just took her out for a few updated pics. She’s back in the tent and tucked the leaves some more. She already unbelievably frosty already and can’t wait to see her when the buds really start getting fat. Day 70 - The end of week 10 and all is looking good! Just letting her do her thing and fatten and frost up. She’s definitely still got several weeks left and another couple of days until she needs more water.

All fine, stretch nearly done, DLI was increased to 30, fertilizer changed mid week.

This is the last week before water flush and the harvest. Plants continue in their course. The week plant surprisingly will give some crop but the healthy one is very pretty. From today I started with the water to flush.

den beiden Damen geht es richtig gut und Ihnen haben die heissen Sommertage nichts ausgemacht.😎 Die grösseren der beiden, die ca.2 Wochen Vorsprung hat, ist so gut wie fertig. Werde sie heute das letzte mal düngen und ihr noch ein paar Tage ph-angepasstes Wasser geben. Denke Ende der Woche werde ich sie dann ernten..... Der Nachzügler wird bestimmt noch 2 Wochen brauchen, bevor es soweit ist.😜 Freue mich schon mega auf die Ernte und kann es kaum noch abwarten😜

This weeks update is just basically a photo/video dump! At the start of the week I did some lst and a tiny bit of defoliating and the growth just seemed to burst, I noticed they seemed to began to flower! So I went ahead and introduced the net to the set up and the I’m stoked with the way they filled this tent right out!! These cream manderin are truly fast growing buds. I also started adding Big Buds Liquid to the feeding schedule and so far, so good. At this point I’ll just be uploading photos every Tuesday/Wednesday 🤙🏻🤙🏻

Day 1 Today is the first day of flower here we go doing a water changer in 2 or 3 days will set it to 900 or so can't wait to see the first buds on my girls a lot of love in this grow Day 2 Ppm at 450 now time to change out tomorrow Day 3 have a five gallon bucket at 1500 PPM to add back during this week is the reservoir gets low. ppm's are at 1150 with a fresh change of all the water we'll see how she's doing tomorrow Day 4 had a major disaster last night went in to check everything and have an inch of water inside of the tentnot too much water drain from the pots that the roots got dry but it did sprung a leak when I change the water out I filled the buckets too high so my sealed job broke had to think on my feet put the 4 plants into DiY dwc buckets I built with their bubble inside no way of maintaining the temperature in there going to have to get some kind of a new epoxy and hopefully have the system up and running tomorrow. Day 5 all is well with the grow again completely cleaned out the system and all the buckets put the new epoxy on there and everything is leak free did another exchange what the plants back to their original pots with a slight adjustment to the placement I hope the stress of moving the girls is not going to affect my yields too much it is only day five of flower hopefully everything's smooth sailing from here on out P.s had to add the 5-gallon of 1500 PPM nute solution to the reservoir to get everything at the proper level along with some extra Cal mag and a small amount of the other nutes the PPM in the system is now at 740 Day 6 happy to say not much to report lol everything looks good 🙂 Day 7 week over

So far so good plants seem happy gonna start slowly bringing the humidity down start of next week it hovers between 60 an 65 at the moment will bring it down slowly 5% each week 🤙🤙

Wow good growth this week. Early in the week I noted she fell over and needed support. Seemed very top heavy. She seems to be growing much faster, much earlier in a small pot as opposed to my normal 20L pots... Still don't know if she's auto/photo yet either 😬

Lots of work this week on keeping up on training this week, buts it’s going well! I split a fork when tying her down but the duct tape fix worked great and she didn’t exhibit any stress from it surprisingly :) Each day I tighten the bindings and then defoliate about every other or 3rd day. I keep doing 2 feeds to 1 yucca flush. She now uses 3 gallons to get my saturation and 20% runoff, about every 3 days. When I yucca flush I also foliar feed her to keep things flowing, roughly 1/8-1/4 strength of my food dosage. Foliar feed mix is yucca, kelp, fulvic acid, 1-0-0 Calmag+, and a 14-0-0 ominA. And I fed that every day for 3 days until I watered her again :) Interestingly, 3 days in a row just barely began to give her N toxicity by causing a slight clawing of the mature fan leaves, but no burn in the tip, and day 4 she was flat out again :) so it was right at the edge of useable nutrients IMO. The netting is coming along nicely, lots of weaving going on, refilling the center and spreading the mains out to the corners of the tent. Tried 2 different cloning techniques, one placing them into the peat pellets from Walmart with rooting powder, and the other is a Tupperware container filled with a PH’d weak nutrient solution, and sticking the stalks through the lid into the water. Both techniques have produced roots, peat took longer but are stronger specimens. Tupperware seemed to shock them less but roots are tiny little nodules. Thanks for stopping by and checking things out :)

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

🚀 Tag 20 im Growzelt, Volle Power im Living Soil! 🏡🌱 Ein herzliches Update von den Ladies! Unglaublich, wie schnell die Zeit vergeht. Wir haben Tag 20 erreicht und das Wachstum ist einfach phänomenal! 💚 Vor sechs Tagen (an Tag 14) sind die kleinen Schätze in ihr neues, gemütliches Living Soil Zuhause umgezogen die perfekte Basis, um jetzt richtig Wurzeln zu schlagen und zu explodieren. Der Umzug hat super geklappt und die Pflanzen zeigen sich vital und kräftig. Die Pinienmulch-Decke hält, was sie verspricht optimale Feuchtigkeit und Schutz für das Bodenleben. Und apropos Bodenleben. Das Team ist jetzt komplett!

Finale Phase, die Trichomköpfe schwellen an und färben sich milchig! ...Abwarten und beobachten! Ein Geruch von Guave, Mango oder Banane, auf alle Fälle tropisch! Das Highlight für mich ist die tolle Herbstfärbung, strahlend gelb bis dunkelviolett.

Evening all...back on it AGAIN!!!! Worst is, in the middle of a heat wave (Hottest day every recorded in this part of the world a couple of days in a row!!!)...still need to finish trimming my last crop!!! :'( Will get that done over the next couple of days as these girls need rehoused!!! So, got a cloner at the start of the year...was planning on clone a spare wedding cake I had but that sort of went to pot and life got in the way and that didn't happen. As I also got a hold of an Ultrasonic Mist Generator, I thought I'd give this "Fogponics" Germination thing a go!!! Seeing as @Sweet_Seeds donated a few Magical Beans to my cause, I thought I'd give their genetics a whirl. The Red Hot cookies looked too cool to pass up on!!! So, got the beans popped on the 12th of July and by the Thursday, they were showing their wee heads. One though was also showing its wee tail - I hadn't buried it enough and it popped itself out of the Jiffy Coir plug I started them in. I did get it reburied and it has started growing but you can see its the runt in the pic...intend on keeping this one as a cloner (And will give the cloning a fair whack this time!!!). Since I was worried that the one that popped the soil was going to be impacted, I dropped a 3rd bean and true to form, it was out of the root riot in 4 days also. Got them into the 'fogponics' machine and let them rip (Under 2x11W T5 Sunblaster 6400/k's and a Amazon Special LED light for extra Spectrum) and they seem to be coming on grand. Noticed some yellow spots on the leaves and in 2 minds if it was: A. calcium (As starter plugs are Coir and I didn't put calmag in the plug hydration mix - Jiffy Original plugs are supposed to be buffered for this!!!); B. if I should have broken and washed them out of the Coir and put them into straight Hydroton (The fog could have been saturating the Coir and choking the internal roots a bit) or C. if its just the abusive heat we've been having here (In a country where A/C is basically unheard off as heat doesn't exist outside!!! 😋). Roots are ripping out of the net pots now so they're about as ready for transplant as can be...just wanna give a day or 2 more to see if the heat here settles as I can't adequately cool the area they're going too - but then again, under LED so heat may be good as it doesn't heat the leaf surface up as much! Plus I have a couple of plants to trim...still hanging in their humidor tent when is needed again for growing! Think this will also be the retirement party for the Wilma. Going to build an Undercurrent Fallponics system when this run is done (Wont have time to get it setup before these girls need forever homes!!!). Have the crates bought and a bit of research done on how to DIY a build so hopefully this turns out to be a decent run. Also have a few people with building experience on hand to give advice. Since last grow: Lights have been upgraded to a Geekbeast 630W Pro LED (3500K Spectrum - UV 385nm and Far Red 730nm built in [won't use the 730's as they can't be run independent of the Main Lights...be wary of this if you buy one off Alibaba for the 730's built in!!!] - Will run the 385UV's though throughout the grow for more blue...will run then 3 hours after lights on to until 3hours before lights off). Also procured an InvisibleSun LED 730nm Flower Initiator (Will use this for EOD Far Red treatment to try a 13/11 flower cycle) and a Migro UVB310 fixture - For the Trikes!!! 😝. Have a Haliea 300A winging its way to me as we speak. Have some Non-Stick Micro-tips flying in from the Grand old US of A a will to get a better, more consistent yield. Think thats about all I have for now...Happy Growing all!!! 💪