I will update this within 5 days . I still dry the flowers.

It was another great week here in the grow room plants have come leaps and bounds low stress training is really having a huge effect on canopy density and i cannot be happier

The Ztrawberriez Auto is very resistant has a great sweet strawberry smell throughout the garden. As you can easily see from my grow question, I was initially afraid for the plants due to the high temperature in the greenhouse (as soon as the sun shone ~40 degrees). It turned out that the plant seemed to like it and rewarded me with beautiful buds with purple tips. Growdiaries won't let me delete the question otherwise this would have happened long ago... She finished very quickly and took just 70 days from seed to harvest. All this confirms that fastbuds is the right address for autoflowers. I'm already looking forward to the next run. Make sure to follow out instgram channel Krautbauern420

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Start of week 5

Harvest day! I gonna let her hang there up to she is dry and good to go for the curing 1-2weeks to go before the glass is filled and we have a weight. Seeding: 23.08.2024 Germination: 25.08.2024 12-12: 05.10.2024 Flower: 14.10.2024 Harvest: 21.12.2024 Curing:

11.11 die Lady nimmt 2L pro Tag auf. Solution 4L mit 12 ml COCO A+B, 8ml Rhizo, 10 ml Cannazym, 3.0 -3.5 ml CalMag, 14ml Boost. EC 1.918 Ph 5.83. Eine Handvoll Laub muss pro Tag raus. Braucht viel Pflege und Nahrung aber bei diesem Wachstum sehr gerne. 09.11 24.7 °C 68 % RL VPD 1.0. Gehe jeden Tag 0.5 ml mit dem Bosster hoch. Schaut sehr gesund aus und verträgt das tägliche Entlauben ohne Probleme. 08.11 neu organisiert, einiges an Blattmaterial rausgenommen. Dieser Busch frisst 1.5 L mit 1.8Ec pro Tag. 650-700 PPFD DLI 1.18 VPD 1.2. 07.11 4 L Solution mit 1.8 Ec. ca.1.6L bis es unten raustropft. Dli 30-32 VPD 1 06.11 Woche 6 Blüte Tag1 Umstellung auf 12/12 nach 24 Stunden Dunkelheit. Dli 28- 30. 2L mit Ec1.72 5.8 ph so wie immer. VPD 1.1

en lineas generales bien el cultivo. la genetica es buena aunque no esta muy estabilizada. no es resistente a los hongos, la cola mas grande que estaba vencida sobre otras plantas tiene botritis ne la parte baja de cada cogollo con lo que se habran perdido facil 30g en seco.

Everything is going well this week. Although two of the seedlings had trouble getting out of their seeds. One did manage to get out on its own but I had to help another one. Because of this two plants are a little bit behind. Just feeding with a good dose of rain water I've upped the amount to about half a liter per day per plant.

It’s spreading out really nicely and quite slowly as hoped. Defoliation and bending continues until flowering hopefully I should manage with space 😱😱😱😂

My strawberry gorilla is really starting to be a pleasure to grow. At 1st I had it in a small tent with my gorilla cookies and the other plant was taking all the light and the tent was so small I kept having to cut back at both the plants so they would fit in the tent but now they are in the bigger flower tent by themselfs and man all the lollipoping did wanders for this plant it’s got some nice big colas. You could definitely get this plant to make huge colas if done right. Only my 3 auto so I’m figuring it out.

Some of the leaves starting to yellow slightly but as it’s coming to the end I think I will let it ride out might give a little pk booster but that’s about it

I’m quite a novice when it comes to growing auto’s but I thought I’d give it a try after seeing the huge colas some people are producing online. To be honest I’ve never really been too scientific either about growing a bit of bud in the past. just recently I have been trying to research in order to gaining more knowledgeable information on how to grow big fat buds. After reading many reviews I decided to give the Hulkberry a try. Week1: 3rd Nov :Germinate seed sandwiched between cotton pads left on a warm surface. 5th Nov : successful germination. Showing a lovely thick root. Planted in a small pot of normal soil. 7th Nov : She’s popping out the soil. In between the Cotyledons she’s Displaying her first set of true leaves already. 8th Nov : she’s looking beautiful, standing to attention. I placed her on the kitchen window sill to enjoy the morning sunshine. 1.5 cm tall 9th Nov : looking great, placed back on a warm surface. I need to get my tent set up lively at this point. 10th Nov : Got the tent set up. I had a bit of a crazy moment and wanted to experiment a little even with the minimal knowledge I have about it. I used a bit of fresh normal compost, a bit of old used compost, a small amount of worm castings, some chopped up vegetables and around 5/10 red tiger worms from my wormery. I kinda hope everything will be ok

Ok, so day 46, i see a lot of “hairs” turning dark/brown/yellow, so i gave it fresh water no nutes. But it is only the top buds, so maybe i will feed 1-2 times more before flushing. Thats for lsd-25. blueberries, on the other hand needs more time. Day 47: very beautiful colours, and the sweetest smell ❤️

Day 43 : Watering with co2 tab / 5L. Also added food again because i think they need it. Increased ppm to 850. Maybe the next one will be pure water. Ventilation works all the time when lights are on. Temp and humi are stable and this is good for the girls. 5 cm in 3 days. Patience is the key always. Also removed some burned leaves from all ladies. Edit (Day 47) : Watering with co2 tab every 5L. I watered with juices again at 850ppm because i felt that they need it. Only DsD drank pure water because of burns. Also 4cm in 4 days. She will be low yielder with good stuff. It smells sickkkk.

First Day June 16 : • 1 3/4 Inch Tall • 30ml Of Water Day 5 June 21 : •Nearly 3 Inch Tall •50ml of Nutrients Water So far I have been feeding daily when the soil runs dry Day 7 June 23 : •3inch 1/4 •80ml of Nutrients Water

Been a busy week, everything is looking good I still have 1 that is behind and still recovering. Potted into 6.5L pots. Vpd is in range but does fluctuate. Gonna back the EC off a little as i find it to be high in nitrogen in places I don’t like doing plain watering so I shall lower the ec and do a little extra run off Midweek so some good recovery from transplanting everything looking good still environment perfect backed off the nutrients added a water butt and and air pumps to the room. Later week update, all these ladies are thriving in there environment really healthy plants, I need to get rid of the shite from the early growth when they were fresh cuttings now. The branching has exploded now these girls take about a week from topping to get back to full growth rate under these led lights other than that all good. 🌱

Welcome everyone The first seven days of flowering have just ended for this beauty AYAHUASCA PURPLE 😈 Wow , she's already purple and smel like it 🔥🔥 Shecwas pretty fast in producing flowers 🌻 The appearance is not extremely healthy because of me, I was away for a few days and my self-irrigation system did not work properly, leaving the plants in shortage of water 💦 Maintaining the correct proportions between dry and wet soil is essential But she will recover 💪 In this week I have slightly defoliated to allow the light to penetrate more and also better ventilation ✂️🍃 About the lights cycle 💡 We are now in a 12/12 on / off.. Always under two SP3000, from Mars-Hydro, at 75% of the power.. About nutrients 👇 I still giving their always organic/veganic nutrients.. A little bit of silicium (Bionova) / Activator (Biomagno) / Crescita (Biomagno) / Activera (Biobizz) / Grow vegan (Bionova) / The Missing Link (Bionova) / X-Cell (Bionova) / Bioheaven (Biobizz) , a little bit of P-K 3-5 (Bionova) {in spray solution } and for the firsth time a little bit of Fioritura (Biomagno) and Bloom vegan (Bionova) Like i usually do, a little bit of everything at any watering 💧 And that's pretty much everything i've done.. See you in week n°7 📆 Thanks guys for stopping by 😎👍👍 FC ✌️ 🇮🇹

Wächst und duftet. Bin zufrieden und freue mich über das köstliche Aroma, das sich langsam im Garten ausbreitet.