Semana 14. -7 de crecimiento y 7 de floración.

118 CM! What-a-stretch!! Lol I forgot to give her week 2 ferts and gave her week 3 ones instead (removing Voodoo Juice, Tarantula and Piranha, adding B-52, Big Bud and Nirvana). No problem because she already had two portions of fungi and bacteria when I had problems with the timer some weeks ago. Well she’s getting bigger and bigger. I’m a Sativa lover, and this is definitely a big gift to me.

Pues esta es la última semana el sábado 12 corte las red mandarine y hoy martes le toca a la 8 ball

Everything so far so good Blue cheese on the left Sweet zz on the right, RQS recommend with the blue cheese to LST during week 3 so decided I’d just do it on the sweet ZZ aswell. Never trained a plant before think it went well tho.

Not much changed this week.... Trimmed the plants again, removing 70% of the large leafs so the plants can focus on the buds. Also removed all new bud growth too and a few other smaller buds. Aiming to have around 12 buds per plant, fingers crossed. Started using a boost solution along with the feed. Now feed every 2 days. Doing this so that they can dry out between watering/feeding. I’ve sorted out the humidity levels now, however still a little high when lights are off - 58%. Decided to do a 9th week of flowering, but will review this again towards the end of the 8th week. Could do with bring in an heat source for both day and night, temps are around 15 night, and 23 day.

Comienza la floración de estas pequeñas!! Cambiamos línea de fertilizantes gracias a b.a.c 👍👨‍🌾🏻🍀

comon!

Week 21: August 16 2020 - August 22 2020 Great week, weather-wise except for some strong winds in the middle of the week. Some branches and leaves took some damage and went a little limp, but they all seem to have bounced back. Still more yellowing, I'm pulling dead leaves off the plants pretty much every day. I know it's natural and it has been a bit cooler at night recently, but I'm still a little bit concerned. Other than that, new growth is coming in strong, has a nice green color, and the little buds look healthy so far. First full week of flower under the belt. Thanks for stopping by. Cheers!

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hey everyone ☺️. This week she made a nice boost. I have decided not to use any more training and to send them into bloom next week :-). This week it was poured twice with 1.2 l each. The tent was cleaned and the humidifier was refilled. I wish you all a lot of fun with the update. Stay healthy 🙏🏻 You can buy this Strain at : www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Bio Bizz Coco ☝️🏼 Nutrients : Green House Seeds Company Powder Feeding Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8

Hmm

This week it has a very strong smell and the buds are flowering ridiculously fast I believe it willl take at least to the 10 or 11 week mark due to its size but will def be worth the wait this fastbuds strain(greencrack) is my favorite and I will def be buying again.

The girls have survived another week ❤️ I did a light defoliation and have been monitoring the RH closely. We have had a very damp week here, and the RH kept climbing and had my fan working hard. They are starting to plump up and fill in 😋. They have also started to slow their drinking habits, instead of watering every three days, it has moved to every 4 now. Just a couple of weeks left, I think I will be harvesting these over Christmas 🎄, and will have some great bud ready for the new year! 🎉🎊🍾

Getting caught up, had shoulder surgery 2 weeks ago. These girls are on week 7. Having to feed every other day, pots are light as a feather. So light, that I'm certain they are dead. You can see I topped the auto baby plant the other day. From my experience, I've had zero issues topping, or other high stress training with autoflowers, at all. Knock on wood. That pic was taken 2 days after she was topped. From my (limited) experience with autoflowers, I wait until the day I need to water my plants: do any HST, then water/feed. I really let my fabric pots completely dry out, so the plants seem to be so desperately hungry, they don't seem to notice that I topped or supercropped or broke a bud site, or.....anything, while they were eating! Apparently food and water distract' s them. Pulled my light up a couple inches because, taco leaf. This Ceramic MH light is great. Still under 24/0 light. No problems with temp or humidity. Keeping pH levels between 6.0-6.3 with Oregan's Only. Colas fattening up! Approximately 8-9 inches around. So pretty! Smell is not overwhelming. BUT no more crappy ipower carbon filter, it is crap. I'll get another brand for next grow. I live in a legal state, but don't want my house smelling like weed lol. I prefer to buy items that are Made in America. Any suggestions for carbon filters are welcome. I hope everyone is having a good week growing!!

Smooth few days after the defoliations. They seem to be happy. Malted Milk can be very temperamental but I have been catching on to her ways. Still wary with my feedings tho. Want to give all these different nutes and unknown what the results will be? Installed ac units in each room to ensure good temperatures and RH outside the tents. Hoping for another good week!

I've switched on also the bloom light on my lamp but I've kept the light schedule (will change next week or so). 😊

End of week 4 and things are still moving along despite a few hiccups. Ended up over feeding them at the end of last week and this week we have dropped there ppm down to the 450 ppm mark untill they come around. Didn’t really do to much damage except burn my leaves a bit and maybe slowed there growth a bit this week. Got a laser temperature gun for another project and I’m now able to check my canopy temperature too and it’s great. Canopy sits around 24-25 in the center of the screen and between 21-23 on the rest. Got around 65 D.L.I on the canopy's tallest area in the Center of the screen directly under the light when it passes over. The 1000w HPS is on the rail mover so it’s keeping things from burning and getting too intense. I recently added 2 x 1000x(180w actual) LED “Blurple” lights I had kicking around not been used so I through them in the tent to add some different light spectrums that the HPS doesn’t have. Just a little added extra kick for them, why not rite?...lol been struggling to keep humidity up across all my tents really, got the bare minimum everywhere and only one 1gal humidifier to run in the big room. Temperatures were cold the last week outside in the -20c range so my basement was a bit cold despite the one baseboard heater, which makes things even drier! Lol There has been no need to use either of my air conditioners in my tents for a month or so now even with the 2 x 1000w HPS lights in tents running side x side in the same room. Which is good cause they also drastically drop my humidity, the lights and the air conditioners...ugh. Lol well that’s if so far for now, Cheers 💨

Hello everyone 😎 Week 5 of flower for the Dutchie🧡 Time to flush⚓️ Mac#1 Very nice smell of citrus & cookies 🍪🍋 SFV top buds ready✂️super dense,smell citrus & earthy🤤 Glueberry one more week for the top buds✂️

Got hydro halos setup because I need to be able to go away for work for a few nights, Was actually really easy to setup and works awesome, I got most the parts plus all my nutes from my local hydro store. I'm using cocoforcannabis.com as a guide for most of this grow and his site includes details on how to setup an auto watering system. At this point I'm still using Professors Go Green for cal-mag and following the GP3 feed chart to mix nutes to the right ratio and then diluting with cal-mag water to target EC (300-400EC for wk 1). Some of the plants had clawing leaves and were really dark green - I read that this could be caused by nitrogen toxicity and I'm concerned this may be due to the Go Green as it seems to be intended as more of a deficiency fix rather than a regular use cal-mag supplement for coco. Some of the leaves on one of the plants started getting rust spots like calcium deficiency, Canna Coco comes pre-buffered and I was adding Go Green so it had plenty, I think the likely case is that nitrogen toxicity may be blocking calcium intake also. I intend to change to Green Planets Pro-Cal which has low nitrogen and is made to work with their line of nutes. Also we named the girls! My roommate and I were pretty baked if you can't tell...

Utopia Haze is a rare heavily sativa dominant hybrid (90% sativa/10% indica) strain created through back crossing Brazilian Sativa strains. This tasty little bud took home 1st Place for Best Sativa in the 2008 High Times’ Cannabis Cup and for good reason – with its potent 18-22% average THC level and long lasting cerebral effects, Utopia Haze is one powerhouse smoke. The Utopia Haze high comes on soon after you finish your first toke, hitting you with a strong cerebral lift that infuses you with a sense of hazy relaxation. Type: Feminised/Photoperiod Cultivation: Indoor/Outdoor Flowering Time (days): 70-75 Indoor Yield (g): Up to 650 Feminised Outdoor Harvest Month: October Feminised Outdoor Harvest Month Week: 3rd-4th week Aroma: Citrus, Woody, Pungent, Mint Effect: Cerebral Lift, Hazy Relaxation, Sleepy Welcome Everyone to the Final Entry of my Utopia Haze Grow ! There is so much to discuss ! I have been extremely busy as of late trying to get this Harvest together, but i am happy to have it here for you now ! I Seriously under estimated the amount of time, help from others, and my own necessary skills to pull this off.. and i still kind of screwed it up lol ! But its worth noting i have never actually done this before and trying to document it during....was extremely hard. It is next to impossible to work an iPhone with rubber gloves on ! First I want to discuss everything step by step so before you jump straight into the comments on how the end product is so small in "quantity" Rest assured i am happy with its"quality"...and thats all that matters to me because Life is a journey not a destination! and i have learned so much from this grow that I couldn't be any happy even if i messed some things up :) But at the very least I hope you read through this entry in its entirety with an open mind and focus more on the process, rather than just the outcome! I ran out of Ice & i was only able to wash three times..(normally I've heard you should go sometimes 5-6 washes) Preparation is Key & things will be much better next round :) Photos 1-22 These are pretty self explanatory but for those of you just tuning in now.. this is what happens to a very happy plant when you don't have the necessary tools to monitor key components of growing cannabis.. Ph, as well as EC levels play a very key role in the outcome of your grow lol that being said I was just able to save this plant by purchasing both tools but that doesn't mean the plant didn't suffer because of the prior events.. This was a Huge reason behind me choosing to turn this harvest into what i would consider "Solventless Hash Rosin" from "Ice water extracted Bubble hash". Pictures 23 The idea here is the process of using "fresh Frozen Cannabis" this has been discussed many a time online on such sites as instagram and here on grow diaries as well.. I personally have Never tried the process so i decided to try it out and make a judgement for myself.. Video 24 The Cannabis has now been in the freezer for 72 hours making it very well frozen.. as you can tell i struggled getting it all into the 25u Screen Wash Bag. One thing of note i would do differently is i will de-stem my next batch as i also believe this played a part in the amount of plant matter that escaped through the sieves. Photo/Video's 25-28 The idea here is "ice water Seiving" & especially with the bags that I am using here that are only have screen material on the bottom portion of the bag it is very important to have spaces in-between the screens to allow the water to pass directly through the screens into the bottom bucket with the least amount of resistance.. because the hash is so extremely temperature dependant if it gets warm on the side of the bag.. it will stick there and not make it to the bottom to become use able product.. 29 You do not need to use as much Ice as i used here lol... the idea is to keep everything very cold..i certainly achieved that but at the sacrifice of using so much that i ended up grinding product and producing "contaminants" but in the end they are just plant matter that i would be smoking when i rolled up my joint either way so.. I'm not super disappointed.. But it should be noted that what you want to achieve here is a Layering effect where you have the wash bag between two small layers of ice while the "water current" washes the Trichomes away allowing them to be separated by the screens setup below :) Before Starting the machine you should allow some time (i.e.;10-12minutes pre soak to allow the product to become saturated) before the first cycle. By video 32 I have just ran out of ice lol.. Video 33-34 Here I have a tip for you.. to separate the screens that you sieve through.. cut 5 gallon buckets to stretch them across nice and tight.. it'll make scooping your Bubble that much easier ! i learned this from the many "Frenchy" videos I have watched :) Picture 35 Here in lays the problem for most people.. drying your hash without loosing vast amounts of "Terpenes" whilst also stay ever vigilant against mold ! Thanks to all those videos I've watched on youtube.. id like to think this was one of my most successful parts of this process.. Things to Note; Terpenes start to seriously evaporate at temperatures 68F or 20C you need to stay as cold as possible whilst bringing the Relative Humidity in the space down into the 40-30% to stay away from that nasty mold ! I used my cold storage room in the basement.. with a dehumidifier running to keep the space at 45% RH & staying at a constant 15c. All while spreading the hash as thin as possible across parchment paper, on top of the white screens with a fan moving air across both sides of the paper. Pictures 36-38 These are some macros i took in the middle of my drying session I fell in love with the colour. Yes i know the black spots are plant material but they will get caught when i bag the hash & squish the oil out. Thing to Note; at this stage it is important to ensure you 'micro plane" the hash down as fine as you can whilst staying weary of the temperature... any "chunks" will hold pockets of moisture.. that lead to potential problems..ie; mold ... Picture/Video 39-41 Successfully planed bubble hash ready to be bagged and Squished ! Picture 42 Ive decided to follow Pedro.. from Pedros Grow Room and double bag to be on the safe side so i don't have any blow outs. So thats One 25u bag inside one 160u bag ! :) Pictures 43 This is almost 3 grams of the bubble hash from above, already melting in the bag.. this is where i ran into trouble again lol things started getting to warm in the house and i was only able to get one of the three squish's i did on video :( things started getting sticky. Picture 44 This is basically just a photo of the equipment I'm using; 3x5 LowTemp Cage in the frame I built myself, with a 20Ton bottle jack. Something to note here is this is an older Lowtemp model with only a single heating zone which is which i have it closed here heating Both sides of the press :) As well as the importance of having adequate pressure on your plates.. my rig is very overkill for the size of hash bags..lol Video 45 Here is the lovely press video.. its didn't quite work the way i wanted either lol my directional folding wasn't quite tight enough for a big "drip" :) &the Press was set to 65°c Photo's 46-50 are pretty self explanatory :) I had a blow out.. but still managed to pull an 80% return from the hash once squished...& yes it tasted amazing :) Was it worth it in the end... that could be debated.. for some..i understand..its not your thing, but for those of us that are interested in making our own concentrates.. free from Solvents... I wouldn't make it any other way :) If even ONE of you reading this diary finds it helpful to reference for ANYTHING.....even if its "what not to do" ill consider it a success ! Thanks again for tagging along on this garden adventure.. its been one heck of a journey ! Much Love from B.C. Canada, Until Next time, Cariboo