5/18 It's not raining now but it's supposed to later. The plants are protected though. I have brought them out to continue hardening. It's only 57 degrees but they'll be alright. I used what little water was left in the bottom of the gallon to lightly water what looked like it needed it most. I mixed up another gallon and I'll check them again before they go in for the night. These plants are getting hardened off properly. I've had some pretty serious problems when I try to transition to quickly. I don't see ANY problems (knock on wood) thus far. Pink kush reminds me of purple punch. It grows similarly and starts off slow. I hope it turns the corner like the purple punch did and make up for it with the quality of flower. I topped/fimmed a special kush #1. I'll update when I bring them in for the night. This week I'll clean/sanitize the cage and the grow bags. EDIT: PLANTS SPENT A LITTLE OVER 3 HOURS IN THE LEAN-TO WITH INDIRECT SUNLIGHT AND EXPOSIRE TO OUTDSIDE AIR, TEMPS AND RH. I DIDNT WATER WHEN I BROUGHT THEM BACK IN. I'LL CHECK TOMM MORNING AND SEE HOW THEY LOOK. IT HAD JUST STARTED TO RAIN LIGHTLY WHEN I BROUGHT THEM IN. THEY ARE PRETTY SHELTERED FROM WIND AND RAIN IN THE LEAN-TO. 5/19 It's thunderstorms out with high winds so the girls will probably stay in today. They look like they are acclimating well. I can see where some of the FIMS took. I redid one I think. I'll update later if do anything. 5/20 Everything looked AMAZING this morning. Boy that MK ULTRA has get some thick branches already forming. Another shitty rainy day. I consulted chatgtp and it was on the same page as me. No real benefit to expose my girls to 47° Temps, cold rain qnd wind. It will be shitty a couple more days. I'll evaluate things later. WATERED EVERYTHING TODAY. TOPSOIL WAS DRY. I USED APPROX 2/3 OF A GALLON ON EACH PLANT. 5/21 I've got a super busy day. I left early and it was to cold to put the girls out. It's 55° at 9:30a.m. It may rain off and on but I think the girls would do okay in the lean-to. I need to get them ready and hardened for their forever homes. Time seems like it's flying. We are getting close to being able to put them out without risk of reveg. Plus I'm not subjecting my girls to un needed stress for no reason. I'll update what I do. 5/22 Plants were dry this morning. I used what was left in the gallon jug to water all the plants. I don't wantcto overwater and I'd like to keep the nutes in the soil where the plant can absorb them. Not just leak out the bottom. They are all growing at an incredible pace. It's currently 49°F at 9:45. It's overcast with a chance of rain. We are at what was suppised to be the high for the day. If we get above 55 I'll bring the girls out and continuing hardening. I guess it's not going to he an early season. Won't be long though and these girls will be in their final homes. I'm impressed with what I've seen so far. EDIT: ITS 4PM AND THE SUN JUST PEEKED OUT FOR A FEW MINUTES AND IS GONE AGAIN. PLANTS LOOK FANTASTIC. IM SO GLAD I KEPT THEM IN DURING THESE 40 LOW 50 DEGREE WET DAYS. IT'LL ONLY STRESS THEM IMO SINCE THEY LOOK SO GOOD. AS SOON AS THIS RAINSTORM AND COLD WEATHER PASSES WE SHOULD HAVE DECENT WEATHER. JUST A FEW MORE DAYS WHERE HIGHS ARE IN THE 40'S. I FEEL BAD FOR THOSE PEOPLE THAT SAW THOSE HIGH 70-80 DEGREE DAYS AND PUT THEIR PLANTS OUT. THEY ARENT DOING GOOD. JUST LOOKING AT THE FOLIAGE AROUND AND I CAN SEE TREES THAT ARE JUST LIMP. THE BLOSSOMS ON THIS SPECIES LOOK LIKE A CANNABIS PLANT IN VEG WHEN IT GOT COLD SHOCKED. ANYWAY MY BODY IS KILLING ME. I GOT A LOT DONE. AND I SOAKED MY BAGS FOR 40 MINS IN A MICTURE OF DAWN, H202 AND WATER. PRIOR I USED A WIRE BRUSH TO GET ALL DIRY AND STUFF OFF I COULD. THEN I SOAKED THEM AND AFTER I RINSED THEM. I COULD SEE THE H2O2 DOING ITS WORK. REALISTICALLY I SHOULD GET NEW BAGS. ITS JUST NOT IN THE FINANCES RIGHT NOW. OH WELL. THEYVE BEEN SANITIZED AND WASHED AND ILL GO OVER THE ONES THAT ARE STAINED AGAIN JUST TO MAKE SURE I DONT SPREAD SOMETHING. 5/23 What a miserable day. It's 44° and pouring out. I put a screenshot of tbe weather and you can see that after the next few shitty days we are getting sunny weather in the 70's. Light is long enough for them now. I need to dial back the timer morecto get them acclimated. I just have to clean up the cage and they are ready to go. Bags are sanitized. I'm going to spend some more time getting some algae off a couple. These plants are flourishing. I am happy I picked 1gal over 3gal before the transplant. It's turned out perfect thus far. Really looking forward to this. Oh and I watered everything a LITTLE bit as it was dry. Enough to get it through until they get a full watering before going outside. I also attempted a FIM on the other 10th planet. The FIM on the mk ultra worked and I've got at least three tops. 5/23 WATERED ALL PLANTS WITH APPROXIMATELY A HALF GALLON. Plants were all super light and dry. I keedcto water more volume at a time. This is easier than fixing overwatering. Things are getting tight in here. Plants are getting huge! The FIMs and Toping that ive done took. That big mk ultra has 4 or 5 tops on it! Plants look super healthy. Good weather is coming. They'll be in their forever homes shortly. It's working out perfect. Some of these plants look like they'll need a transplant soon. Still need to clean up the grow cage but that will only take a minute. Also need to fix a tear I made in a grow bag but again thats just normal small shit. If you look at the snap shot of weather I took you can see the weather is going to improve greatly. This is when I'll do the majority of work. I'll update anything else I do.

It's time to harvest them but this I wasn't there for last 2 weeks had humidity issues causing bud rot

Two of the plants had little bit of powdery mildew so I defoliated those leafs. Also sprayed them with baking soda, liquid soap and water mixture. Hopefully we don't find any more of that. Otherwise everything seems good they are healthy and growing well.

Idhdb

She's got good smell so far. Just did some defoliating almost some lollipoping. Give some nutes but it's been raining so haven't needed to feed as often lol Happy growing 🌴

It’s the second week of flower and I’ve got her spread across the net. I’m going to do a foliage feed of fish mix and alg a mic in a around 4 days as well as another 4 ml of alg a mic in 2L.

48 hrs. of dark are up and its time to chop. pots have dried from the last flush. These did not stretch as much as I would have liked I will have to adjust my light better next time and there was a lot of lower development near the media, hence not enough air flow. when I flushed the pots the water level went up to the lower growth on the Think different and the bottom was wet and rotted the bottom half. I did a mild lollypop on them I'm early flower it just was not enough, LESSON LEARNED. Chopped on 2/8/20 whole plant drying low and slow 54% RH 68F for 10-14 days then will trim and jar. 981 grams wet with the lumber. lets see how they dry. I got a rosin press coming today I will squeeze all the trim and larffy buds into dabs yummy! All in all I recommend these genetics I will try the think different again I'm sure I just got a recessive dwarf gene. I have seen other grows of this same strain same breeder that are huge and stacked. thanks again to Fast Buds 420 and Green Buzz Nutrients for suppling the goods for the grow. Stay tuned for the harvest pics and vids along with the rosin squish. Be cool to one another we could really use it these days.👏 please fell free to comment on the grow as this is my first true auto flower grow. If any one out there is experienced with rosin pressing and you have any tips for beginner's let me know I will incorporate them in the next videos. thanks

DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Do you have the Xs Factor? email [email protected] for open apprenticeship spots. Open to Canada and USA (no cost) MARS HYDRO LIGHTS: https://www.mars-hydro.com/mars-tsw-2000-led-full-spectrum-hydroponic-led-grow-light DISCOUNT CODE FOR LIGHT: BudXs CULTIVAR: BudXs2 GROWER: @PsGrowers ________________________________________________________________________________________________________________________________________________________ Notes: @PsGrowers - How much longer???? Im sure this is what you are saying. Its been a long journey, and typically autos will finish sooner. But this is an XL version as you can tell by their monstrous size. You will have a lot of bud, however you will have a lot of larf due to the penetration shortcomings of LED vs HPS, tit for tat. This will be a pleasure of a smoke, and well worth the wait I promise. Continue your excellence through the grow, I really look forward to your harvest

First grow, if you have any advice or feedback to give me go ahead :). All conditions of the plant will be what the plant is currently at in week 3. I tried to keep it as organic as possible and only cut one of the lower leafs to try to get a clone going.

Up up and ... one more week here We go ❤️🤘 so they are grooving hehehehe i'm focus on producing good amount of trichomes and tryin to bring some colors to them. i reduse nutrients and stabilized my condictions . i like this AC thing lol I brouth down my temps to77 day time and 65 nigth time, humidety is the one i'm having problens bringing it down but is not too bad any way is going up and down and arround 55% so is ok Peace out and stay happy and safe D

Week 8, Week 8 was a fairly easy one. The flowering spots are starting to fill in, and the leaves are starting to become frosty. I am watering her every three days with a teaspoon of nutrients and a tablespoon molasses. I think I have dialed in the grow tent and have a routine down. Please let me know if you have any suggestions/ questions. Happy growing everyone

Germinated 11/12 seeds

Smooth sailing just add water soil has made this run easy she’s frosty up nicely and buds are looking great

In der fünften Woche habe ich es gewagt. Nachdem ich die Weiße Witwe schon etwas trainiert habe, wurde sie jetzt auch oberhalb des fünften Sprossknotens abgeschnitten. Dazu habe ich meine Nagelschere benutzt (siehe Video), mit der ich mir auch die Fußnägel schneide. 😅 Dann wurde die unterste Nodi noch entfernt. Jetzt hat sie noch vier Nodien übrig, die zu acht Blütenstände wachsen sollen. Es war das erste Mal, dass ich eine Pflanze getoppt habe. Um sie besser runter binden zu können, habe ich einen Haselnusszweig quer über den Topf befestigt. Das macht das Festbinden um einiges leichter. Die Cherry-Lady lasse ich ohne Training etc. wachsen. Sie ist aktuell ca. 40 Zentimeter hoch. Hier werde ich in den nächsten Tagen nur etwas entlauben. Die untersten Blätter können abgemacht werden. Sie sehen nicht sehr gut aus. Die Kirschen-Lady kann auch einen größeren Topf vertragen. Sie wird bald umgetopft. Der PH-Wert der Supermarkt-Blumenerde ist mit etwa 8 zu hoch. Der Idealwert liegt zwischen 6 und 7. Ich werde dafür Rhododendron- und Hortensienerde besorgen. Damit wird ein eigener Mix hergestellt. Solange bleibt sie aber noch in ihrem kleinen Topf, dem ich einen Mantel verpasst habe. Der Jutebeutel soll die Pflanze vor den Trauermücken schützen. Das abgeschnittene Teil der White Widow wird versuchsweise in einen kleinen Anzuchtbehälter gesteckt und ordentlich nass gehalten. Ich bin gespannt, ob es mir gelingt, die Pflanze zu klonen. peace & love

Day 128. It took me almost 48 hours with two short naps to sort all 8 girls. Result not bad, think easy will brake 1g/W, I have 720 setup, but one light is limping, so it's closer to 600. Think harvest will be in 900 area. It's 90 W per plant only and I think one girl will go above 150 easy ! I doubt I will post Tangies weight in statistics, don't want to screw that strain, she could be way way WAY bigger !!! Happy Growing !!!

Day 57 26/08/24 Monday Feed today using de-chlorinated tap water pH 6. No plagron products as noticed burning again. (I think I'll do a run using advanced. And Plagron. Just to see what's different. ) There all showing great progress!! Divine seeds - auto Overdose, the main bud is so compact and dominant it looks great! The rest are performing well, did a decent fanning of lower two fans that started to turn in colour. Apart from that left them to it ✌️💚 Day 59 28/08/24 Wednesday De-chlorinated tap water pH 6 only today, 400ml with little to no run off. Day. 61 30/08/24 Friday Another feed today using de-chlorinated tap water pH 6 with Plagron products. Picture and videos coming tonight 🤯👀✌️💚 Day 63 01/09/24 Sunday (End of week) De-chlorinated tap water pH 6 today with calmag. Notes on plant structures , bud structures, leaf density. - Auto critical orange punch - Xmas tree shape, main colar nice and thick. Side arms - doing with LST next time would provide more decent tops. Strong structure, big fans, but bud to leaf ratio is high! Compact ball shaped buds so far. - Orange Bud - she Climbs! Tall, Long structure, I would top this strain next time, with LST next time again she would provide alot more tops. She has an even leaf to bud ratio, but the buds look fire already and there only just forming! Getting hues of blue on calyxes. Taller buds. - Auto Melonade Runtz - Another Xmas tree shape, ideal for LST, main colar bud is impressive, she just wants to stack. Leaf to bud ratio is even again, bud the buds are forming tall, with pistils firing everywhere. - Auto Overdose Wow, compact short autoflower, with a powerful punch! She is dense!! Fanse are even, thick, and balanced. Leaf to bud, even. Bud formations - dense boulders already, like mini hedgehogs. I would definitely do a SOG with these 🤩

bla bla bla