Likes
Comments
Share
Week 3, Day 15 of Veg. Looking good and healthy so far. When they reach 6" I should have enough nodes to start LST.
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
200
Share
@Ferenc
Follow
Day 58, 7th of November 2020: The 6th day since the lamp switched to be 12/12. I raised up the nutrition intake as it can be seen above only the BioBizz family 2ml/l and removed some LST because the plants remain in shape or just set a bit but nothing significant.... They look good and strech is on the way..... These Original Sensible ones are having really nice smell :) Nothing really to report there is crazy 2-3 weeks from now ;)
Likes
149
Share
@DevilsBud
Follow
New week for the contest headshot from Seeds Mafia She looking really good still trying to widen here out try not to break shit but so far so good . I want a mighty Bush out this one so boosted here nutrients up she looking healthy so far So other then that have great grow and good luck Growmies made video today and had just use it for this theme capicé visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some handy info about the marshydro TS-1000 Increase Yield&Crop Quality in Led Grow Newest SMD Led technology provides the highest Par/Lumen output, makes you get 30% higher yield compare old led lights, can get up to 2.5g/watt yied. High Efficiency Energy Saving Plant Light Only 150 watts true output with so you don't have to check your light bill every month 😎 342 pcs LEDs, more scientifically and energy-efficient! Perfect for 3'x3' (100x100cm) veg stage and 2'x2' (60x60cm) bloom stage, higher intensity in a Mars Hydro grow tent. Sunlike Full Spectrum Led Indoor Growing Infinite close to natural sunlight, suit for all plants whole satge indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. High Reflective&Noise Free Fanless Led Grow System Quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants to receive more energy and without burning your plants for maximum headroom
Likes
11
Share
@johdlong
Follow
Week 6 of flower, the buds are fattening up and triching out. The terps are super sweet and very potent smelling. I haven't seen very many nanners or balls lately, but I have seen them popping through the buds occasionally. I still inspect daily, but some days I don't find any, so I hope it won't give me too many seeds. I did notice that the bud that gets the most intense light has started having tips pointed upwards and flipping its leaves. I attributed this to heat stress, so I moved that light over bit. Day 38 update: this last week I was only watering with distilled water and the yellowing has progressed, so I assume I was right about the nitrogen deficiency noted a couple weeks back. Today I top-fed with a homemade fast acting high nitrogen organic fertilizer, we will see if this helps. Also nothing in my current flowering feeding regime has a lot of nitrogen, so I think this will likely solve the problems. I have also decided to give them an extra 15 minutes darkness for a total of 13.25 hours darkness, 7.5 minutes extra on each end, tell them its almost time to finish with ~4 weeks left. Day 40 update: still been pulling herm balls and nanners off the big one, the others seem to have stopped, but i still check them daily. Gonna be slightly seeded for sure, but I hope not too much. Also, the yellowing seems to have been managed after that nitrogen feed.
Likes
2
Share
This girl has become a beauty. Stacking up nicely with amazing tricome and hair production. Unmistakable RS11 aroma. Thinking she will be the heavyweight out of my outdoor plants all said and done.
Likes
6
Share
@WeedM8
Follow
Gorgeous flowers getting pumped by this beautiful 600w led light
Likes
2
Share
@KEVS_BEST
Follow
Woche 5 - Vorletzte Woche der Vegetation und beeindruckende Entwicklung Die fünfte Woche markierte die vorletzte Vegetationswoche, und die Pflanzen zeigten weiterhin bemerkenswertes Wachstum und Gesundheit. Die Nährstoffe und das Gießschema blieben unverändert, wobei der EC- und pH-Wert sowohl im Drain als auch in der Nährlösung stabil auf optimalem Niveau waren. Die Luftfeuchtigkeit wurde leicht auf 60 % gesenkt, während die Temperatur weiterhin im Bereich von etwa 22 bis 26 Grad blieb. Die Pflanzen setzten ihr Wachstum in beeindruckendem Tempo fort und entwickelten enorme Seitentriebe. SPOILER !!!: Ohne jegliches zusätzliches Training bildeten sich am Ende der Woche 16 bis 18 Hauptnebenbuds sowie jeweils ein zentraler, kräftiger Headbud. Die Genetik dieser Pflanzen erwies sich als absolut außergewöhnlich. ENGLISH Week 5 - Final Week of Vegetation and Remarkable Development The fifth week marked the penultimate week of vegetation, and the plants continued to show remarkable growth and health. The nutrient and watering schedules remained unchanged, with EC and pH levels stable at optimal values, both in the nutrient solution and the drain. Humidity was slightly reduced to 60%, while temperatures stayed in the range of 22 to 26 degrees Celsius. The plants kept growing at an impressive rate and developed enormous side branches. Without any additional training, by the end of the week, they formed 16 to 18 main side buds along with a strong central head bud. The genetics of these plants proved to be absolutely outstanding.
Likes
91
Share
Hi everyone! Sorry for the late post I've had a lot of personal crap holding me back but I'm on the bounce back and trying to catch up with everything. Couple lessons learnt on this one. I'm going to run this strain again but a little differently based on experience from this grow, the plants were ready at week 8 barring flush so I reckon I can cut away two weeks of flower time and start my plain water flush at week 7 and chop at week 8 instead of 10 which will be great as I will be adding at least one but most likely two of those weeks to the veg time so my turnaround will be the same but my end yield should hopefully be much better. This grow is by far my best quality end product, hard nugs, caked in trichs, stinky as hell water and strong as a Russian circus freak. Yield however was not as expected from 2 meter squared using a 600w hps and 450w Ied I wanted 20-25 oz and I got 15 but I know where I went wrong as previously mentioned and I have set a challenge to do it again hitting 25oz, same strain, same system, same nutes, 1 extra plant, 1-2 weeks extra veg time and 1-2 weeks less flower time. What's everyone reckon? Any holes in this plan? Like the look of my end product? Got a question? Comment below! Thanks everyone for looking in its always my pleasure! Peace and love Fire_Farmer🔥👨‍🌾
Likes
31
Share
48 hours of darkness starts today for the last two the smell is more diesel then the first two trichromes look perfect chopping on Saturday The first two smoke sample report after a 6 day dry and week and a half cure earthy diesel inhale and diesel fruity exhale very couch lock half a bout I’m KO definitely night time smoke full report after these two cure thanks for stopping by if you like leave a 👍
Likes
27
Share
@WestOzzie
Follow
Flowers are getting bigger by the day now,not much more i can say .. she's loving life
Likes
5
Share
@Ninjabuds
Follow
This will be my 1st auto run. Other than one time I was sent some free f1 autos from rqs and I started some but I ended up tossing them for some reason or another. I am actually super excited to try out fastbuds. I have been wanting to try out fastbuds for over a year now. I'm not the greatest with seedlings so I am doing a test run with a 2x2 tent I'm gonna try and grow the best plant I get out if the 3 seeds hopefully it doesn't out grow my small 2x2 tent . Pound cake thou looks like a killer strain with some fat buds can't wait to see how fast fast buds really are. Here we go.
Likes
16
Share
@420keef
Follow
Looking healthy! Still wondering if the second one is a gorilla glue because i might have mixed them up, i gues time will tell!
Likes
2
Share
@JoeCNote
Follow
Mites have taken hold bad at this point, vacuuming them off buds everyday, trying to avoid over spraying
Likes
21
Share
@NG420
Follow
Fattys are growing and seem to be thirstier.Used foliar spray to help the leaves and also started tucking. When the plant was topped pistils were seen for first time.
Likes
8
Share
So introduced a scrog net into my grow tent this week and tied some high growing stalks down a little so the others can try and reach there height! Whether I’ve added the net to late is a different question and answer!! My first grow so still learning as I grow haha! Temps been good and they look like there flowering heavier each week which is a bonus! Still unsure on the flush system when harvest is nearing!
Likes
167
Share
🗓️ 1° WEEK FLO // DAY 1-7 (from switch) // DAY 78-84 (from dry seed) ⚡- Light: 40 cm / 200 watt. Added a second lamp to support the flowering stage; ⌛- Schedule: 12/12. First week after veg begins, I hope that the gradual approach to the critical point helps to have a quick transition; 🌡️- 23° C - 65% RH average; 📑- PH 5.8 - EC 2; 💧- 5° DWC change for both after 48 hours flush; 🍔- Transition blend: tap water EC 0.4 + Silic 0.5 ml/l + CalMag 0.5 ml/l + Hydro A-B 1.8 ml/l + Oligo Spectrum 1 ml/l + Power buds 0.5 ml/l; 🥅- ScrOG-net mounted at 50 cm on DAY 4 FLO; 🔄- I reversed the position, the phenotype #1 is now on the right side; 🌱- Pheno #1 shows burnt tips since week 5 but I don't care, she has a great shape, is enormous and gorgeous. The lateral branches are long and strong, the main stem is very thick! Pheno #2, instead, is smaller and the lateral branches are not so long but she has the best root system I've ever seen!
Likes
7
Share
Becoming a challenge to keep these branches trained. Looking for some more stretch before she reaches the beginning of her flower weeks. I will be performing a flush next week. So far it’s going well.