Recommended
Likes
13
Share
I made these fem seeds from bridal party x the queen from copycatgenetixx. Initial germination start sept 2nd, added 3% h202 about 1 tbsp in the 1/2 cup of water. 4/4 100% I do not need to hunt as all will be phenomenal
Likes
38
Share
@Chucky324
Follow
Hello. This is the end of week 12 and the beginning of week 13 of veg. Everything is going good in here. The plants seem to have doubled since last week. They all got a gallon of food yesterday and were all reaching up this morning when I went in. Every few days I push the tips down under the next rung to spread these girls out more. I'll do some training on the 3 plants I've got going indoors this week. Ok. Have Fun. Chuck.
Likes
7
Share
@Chubbs
Follow
This strain has been an absolute pleasure to grow. I'd say they where the perfect size for indoor grows as they stacked amazing. Not requiring special treatment and pretty much took everything I threw at it. All in all highly recommended for all levels of growers.
Likes
22
Share
@Stork
Follow
Day 8 Mon PH 5.7 EC 0.8 DLI /19h / PPFD / Water 23c Day 9 Thue Change the water and add nuts 10 L PH 5.2/5.8 EC 0.8/0.8 DLI /19h / PPFD / Water 25c Day 10 Wed I've confidently carried out defoliation on the lower branches of my autoflower plant. Despite the advice against it for autoflowers, I've decided to trust my intuition and follow my gut feeling. Time will tell the results. 😎 PH 6.3/5.8 EC 0.8 DLI /19h 17 PPFD / Water 22c Day 11 Thu PH 6.1/5.8 EC 0.8/0.9 DLI /19h 17 PPFD / Water 22c Day 13 Sat Add water to lower EC PH 5.8/ EC 1.0/0.8 DLI /19h / PPFD / Water 22c Day 14 Sun The plant was slow to grow, but now it's starting pre-flower early. Add water to lower EC PH 5.2/5.8 EC 0.9/0.6 DLI /19h / PPFD / Water 20c
Likes
6
Share
@PoshGrow
Follow
Welcome to Auto Alaskan Purple Grow by PoshGrow! 🍀 Week #1 2020 July 23 - 30th. General Info: When planted: 2020 July 23th. Week: 1 Days: 1- 7 Last Update Day: 2020 July 29th. Plants: 5 Alaskan Purple Auto. Equipment: Tent: MarsHydro 1mx1mx2m or 39"x39"x72". Light: HLG 260w V2 Rspec QB Kit. Exhaust: 4" 322 CFM fan + Viper Carbon Filter. Intake: 4" 100 CFM Inline Fan. Oscillating Fan:             Lower: 4" Ram Fan.             Upper: 16" Oscillating Ram Fan. Humidifier: Taotronics TT-AH001. Dehumidifier: Pavlit MD750. Soil: NPK soil 40% Compost, 50% Peat Moss, 10% Agroperlite. Pot: 7 gallon Fabric Pot x 5pcs. Nutriens: Fox Farm Trio. PH Correcton: Chemoform pH-Minus Granulat. PH Pen: Cheap Chinese one, I callibrate it every time I use it. Comment: Germinated in paper towel, sprouted under 36h. Planted in 7gallons fabric pots filled with NPK soil under 18h light schedule. Watering with pH corrected water when needed. Maintained 65% humidity and after 24h we have 5 nice seedlings 😉✌️
Likes
11
Share
@sweetkaya
Follow
The ladies are growing fine and faster. Fertigating till run-off. Light increased at 50%
Likes
33
Share
The stretch continued with this girl after switching the light back to 20-4 instead of 24 (done by mistake). I increased the brightness to 100% now as well. Aside from the stretch, I'm seeing some deficiency on the first true leaf. I'm using Ocean Forest, so I don't typically start with nutes until week 3-4, but looks like I may have to here if this conintues.
Likes
3
Share
Día 36. Estamos en 6ta semana. Los esquejes se atrasaron debido a que han sido días muy fríos y no he logrado enraizarlos. Decidí poner el extractor de aire junto con la bomba de aire, así solamente se prende 15 minutos cada hora. Así estoy logrando temperaturas mayores a 24°C en el indoor y así voy a lograr el enraizado. La planta ya tiene un tamaño que ocupa casi todo el indoor. Pero lo importante es que la voy guiando y ya estoy proyectando como va a ir cada rama. El tamaño va a exceder lo que esperaba, pero aún así creo que si logro lo que tengo en mente, voy a sacar muy buenos resultados. Igual no me voy a arriesgar demasiado, así que si contando 10 días desde ahora, no logro que los esquejes enraicen, voy a pasar la madre a floración sola. Cómo pueden ver, las ramas están bastante gruesas, y el la ramificaciones van ganando su lugar cada una. Las raíces son demasiado grandes, aunque sé que voy a poder poner la planta en el sistema de arriba igual, aunque me voy a tener que ayudar de algo para meterlas. Es importante no utilizar las manos, ya que se pueden transmitir muchos hongos. Voy a seguir actualizando e ir viendo que pasa. Pero ya estamos en los últimos días de crecimiento, haya o no esquejes. Incluso puede que ya pase la planta al indoor de arriba para darle mayor libertad de crecimiento. Esto me va a servir para tlmar en cuenta en la próxima camada que se vendrá. La idea de esto es hacer las cosas rápido, y no en gran tamaño. Pero siendo que ya estoy en el baile, no me queda otra que bailar. Día 40 Los esquejes no estaban enraizando, así que decidí cambiarlos de lugar y los puse arriba de la luz, donde les da calor y luz tenue. Espero que ahora si agarren. Y hoy fue el gran día, pasé la planta madre al módulo de arriba. Pero lo voy a dejar una semana más creciendo. De esa forma veo si los esquejes llegan a agarrar a tiempo. Y además tuve un problema en el trasplante. Primero que la planta se hizo más grande que lo esperado, y la raíz también. Cuando la pasé, hubo contacto de la raiz con prácticamente todo lo que había cerca. Sumado a que se enredó en el oxigenador, así que quedó una pidra difusora en la raíz. Dado el alto riesgo de haberla contaminado con algún hongo, le puse una solución de agua con agua oxigenada, recirculando continuamente, para lavar las raices y de paso bajar el stress de teansplante. Mañana veremos cómo arranca el día. En el aprendizaje me llevo que en la madre, es mejor hacer un corte en el primer nudo, o dejar las ramas del segundo y quitar las del primero. Y así que queden sólo dos ramas, para luego dejar a los esquejes en el medio. Eso planeo hacer con la próxima variedad. Entre tanto ahora sólo me preocupa que la raíz no se haya contaminado en el traspaso. Ya en 8 días estaré pasando a floración si no hay esquejes. Si llegan a agarrar, habrá que dar unos días de crecimiento hasta que alcancen a la madre en altura. Pero ya está todo en definición. Ahora sólo queda esperar y seguir guiando a la planta. Ya tengo ganas de poner la próxima, pero falta bastante para eso. Tengo 10 semanas de flora, así que recién en 5 semanas voy a poner la nueva madre.
Likes
12
Share
Day 8 - First official day of veg and both ladies are looking good and on schedule for a couple of changes. Nutrients: 10ml of Hydro A & Hydro B were added to both buckets (10L of water in each bucket) PH: the Milwaukee PH controller was set to work - starting at a PH of around 7.6 - 7.8, it slowly worked down to a perfect 6.0 over about 50minutes. Lights: The lights were readjusted to be 60cm from the seedlings who are all between 8-10cm tall and the intensity of the lights were increased to about 70% brightness. Day 9 - Both plants are taking nicely to the adjustments and I am happy with the progress. Temp and humidity are stable and PH is controlled. Day 11 - The second nodes are clearly visible today for both Chong and Max which would hopefully put them at 3 nodes by the end of the week - right on schedule! Day 13 - The ladies seem to be showing some signs of heat stress, so thinking about adjusting the lights after their period of dark today because they are due to be adjusted tomorrow anyway for the new week of veg
Likes
9
Share
Trapianta purtroppo per crescita bloccata ma ora si è ripresa benissimo lei è l’unica delle 5 che sto facendo a solo acqua
Likes
28
Share
Two of the S.A.D. seeds did not germinate. I also used the water glass method to germinate these two. The other two were planted directly in Jiffys. The Bruce Banner unfortunately germinated a day earlier and had no light yet.
Likes
106
Share
Things are getting frosty around here! Critical Cures are at the top of the class. Critical Mass is in second. Charlotte's Angels are in third. Durga Mata is in fourth, with Blue Shark rounding out the pack as far as blooms are concerned, and how far along they are. This week I used the last of my "Tiger Bloom" and "Big Bloom" and I didn't feel like buying more, so I started making compost tea! It comes from my pile that consists of kitchen scraps, horse, chicken and sheep manure. They seem to be liking it. I also gave them a little nitrogen foliar spray this morning. I've had to spray insecticidal soap twice this week. Smells so fragrant out there, it's attracting a lot of bugs. I sent a pic of one of the Critical Cure's to a friend of mine saying "Not long now!" (As in like 3-4 weeks on this particular plant) to which he replied: "You've still got 6-7 weeks!" No, just no. Same guy also told me my plants would be 8 ft high. Ha! Silly boys.
Processing
Likes
8
Share
Buds are really starting to put on weight I was a little nervous because I have never grown autoflowers before and to I have never done low-stress training before so far everything has worked out magnificently minus the pH that was off and the temperature drop elsewise these plants are all significantly larger than originally anticipated
Processing
Likes
6
Share
Se nos fue un poco de altura pero intentaremos arreglar el error farmers... al final quedo simplemente en podas apicales y de momento ramas muy finas. Iremos comentando el proceso Farmers!🍁
Likes
9
Share
@Chupadeos
Follow
He realizado la poda FIM ya tienen entre 3/4 nudos cada planta,debido al posible estrés que puedan tener ,hoy en el riego llevan todo para recuperarse perfectamente el agua del riego es de filtro de osmosis inversa,se ha aumentado el riego a 0.6l ,la temperatura subió algo debido al calor que hace en la zona donde vivo,pero temperatura y humedad controlado,apareció un poco de variegacion en una sweet skunk espero que se pase pronto no es nada preocupante.esperemos haber la respuesta que tienen después del trabajo de hoy ,disculpen la calidad del vídeo pero esta vez me tocó trabajar con La lámpara encendida disculpen,las plantas están todas entre 17/18cm todas van por igual en altura,ya están todas con sus tutores saludos y buenos humos