Nirvana Haze 1
Broedt
@Broedt
Follow
Day 70 of flowering It has only been three days since my last update.. But hence the confusion of days past, I'll update it now again since this is day 70 and that markes week 10. The girls are looking very nice, if I may say so myself. The smell has intensified very much during the last days, yesterday when I opened the tent it really hit me hard in Tha nostrils in a good way. That smell that I couldn't set in words are still present but it smells lovely! I'm not at all sure how fast the trichomes are developing, so I'm checking up on them every day. This leads to alot of uncertainty of when I should start to flush. Some leaves have been yellowing for a while, at a slow pace and I fear that I might start the flush to early or late. But I'm thinking around day 71-75 will be the last day with nutritions. I have uploaded a picture of the trichomes, please let me know what you think?
Blueberry, ChemDog, LemonKush in 2x4
eighth week veg, the ladies were fine i defoleated them again before i sent them into flower
Zerberry cup winner 2024 positronics cup
Colas are getting heavy. Smell getting louder overall I am really happy with the strain
Seedsupplier Zkittles
Die letzte Dame ist aus dem Zelt. Ich bin sehr zufrieden mit dem Ergebnis und freue mich aufs verkosten in 4 wochen. Jetzt wird sauber gemacht, umgebaut und dann in 2 zelten in separaten Systemen der nächste photo run vorbereitet.
Blueberry MAC - by @cannabinology
Completely forgot to update like an idiot, but these videos were taken two days ago. Pheno 1&2 are both male, so I'm just hoping this last one is female. I might flower when I get back from vacation to just speed this process up but I guess well see.
shorts_status_processing
Northern Cheese Haze
RuX1337
@RuX1337
Follow
Damaged a cotyledon. FFS! All values on final day of week (day 7, 14, etc)
MassMedicalStrains Bubba Pupil
So far all plants have been harvested. (3x Bubba Pupil, 1x purple wreck, 1x AK-47, 1x Godberry). The first bubba pupil and AK-47 were harvested a week and a half ago and now have been jarred for 1 week +/- a few days. All pictures are of the bubba pupil and AK. I will come back and update once the other plants have been trimmed. The first Bubba Pupil, which was the tallest of the 3 and most stretched out, yielded exactly 4.5 Oz dry weight. The smell is starting to get stronger after a week. It smells grapey but has a weird funk to it. It must be the “pupil” funk everyone talks about. This plant looked like it wasn’t going to yield much, but I was pleasantly surprised. The lowers were dense and compact which contributed to a good amount of decent sized buds. Overall, I’m pretty pleased with the yield and quality from this plant. The AK-47 seemed like it was going to be a heavier yielder, but it ended up only yielding 2.5 Oz dry. The main colas were far during flower and dense when dried, but this plant had little to no lower quality buds. Everything below the main canopy seemed like it was airy and not worth jarring up. This plant smells a little bit fruity, but I can’t really put my finger on it. Super dank smelling, not skunky, but it smells like it is going to be gaseous once it cures up a bit longer. The Godberry yielded a total of 3.25 Oz. She was the best smelling by far out of all of the girls in the tent. Super fruity and sticky as hell. The resin content on her was definitely the highest of them all. I will be back to update once the last 3 plants are trimmed and jarred for a final weight and overview.
Tangerine Dream Auto Balcony Grow
Moritz87
@Moritz87
Follow
There was mixed weather again all week. She took some heavy rain and I therefore skipped the nutrients for a few days because she was soaked in water all the time. This caused a slight nutrient deficit that I hope to compensate the next few days with regular feedings. I had to take some leafs of that were yellow... But all In all she is doing fine and she is gaining flower mass. And she starts to smell really nice.
shorts_status_processing
No name bag seed auto
Hello everyone, So ended up finding this girl with my no name seeds. I expected this one to be a regular seed never suspected it to be a auto. Shows you, you never know what your smoking, lol. Even tho she's small she's doing and smelling good. Lets see how she ends up... See you guys next week... 🤘🤘👍👍👊👊👊
Aeroponic ScrOG ( Gelato )
Hey everyone 😊. Today is the last week before the harvest 😍. I don't even know where to start 😅. I love this phenotype . It smells extremely tasty 😃, and this time I'm very curious to see if the pheno tastes better in the aero than the last time it was grown on earth. I would never have thought that it could taste better on aero than on earth, I always thought it was a Mhytos, but the last run with the Blue Gelato # 41 on aeroponic tasted even more intense than the same pheno on earth 😃. I'm really looking forward to the harvest, and of course I will bring a harvest update before the last update 😇. At the end there is also a detailed report 👍. I wish you all a lot of fun with the update, stay healthy 🙏🏻 and let it grow ☘️🍀 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.5 - 5.8 💦 💧
The Garden 2026-1 - HSC Mountaintop Mint
Total days above ground: 70 Total flower nights: 31 Vege growth stopped around FD25. Started feeding 1/2 strength fertilizer FD26 (last 6 irrigations including today). Excellent development across the canopy. Tried to get some pictures showing how the colas are stacking up along with a couple shots of terminal buds. Included some photos and videos of irrigation setup, drainage and other half of the tent setup that is not often visible in weekly updates. Also, a video showing the canopy with some grateful dead background music. Last week including progression pictures as they are full size. Well, I still don't like the structure, but this plant has really turned on the jets in mid flower. More bud sites than I expected but because I had to HST it, It is crowding AM3 and probably not helping the runt of the litter by doing so, lol. The smell on this plant is a mix of fuel and a hint of mint at one time, but the gas smell is overtaking it at this stage. The aroma is a big reason why i'll use it as a pollen-donator and hope that the lanky trait gets toned down with hybridization. My bets fem-seed outcome was two lanky plants and that most certainly got toned down in the offspring. I think it's related to too much inbreeding because of the much better structure found in the F1 offspring. Smell is starting to ratchet up. Bud sites are mostly formed at this point and we will see some noticable ripening by next week's update. Might see a hint of fattening calyxes in the bud pictures this week. 2026-2 starts in 8 days. Will have some Blue Cookies and Pineapple Express from MSNL running along side some Vanilla Creme Pie from HSC. Can't believe winter-2 is already starting. Time is flying by. Breeding cycle is doing well. Will update that when the pollen-receivers join the pollen-donator on a 12/12 light schedule. Side note -- looks like I avoided any issues from accidentally leaving port hole opened about 8 or 9 days ago. I have it marked in notes and will feel 100% confident 2-weeks out from the incident. So far, so good. The lung room is mostly dark and light would have to travel a difficult path to get in the tent, but still mildly concerned about it.
Honey cream
I am officially in flush now! I love how far I have come with these girls! They have started to plump up nearly the size of 2 clipper lighters in width! The smell is so sweet and after the touch you can smell the caramel all through it! I can’t wait to taste!
María Luisa cookies - Colombia Genomics
PalmaGrow
@PalmaGrow
Follow
7 - 13 sep Inicia 3ro semana de floracion se realiza defoliación.
Runtz and GMO Cookies in Hydro
Lucyfer
@Lucyfer
Follow
So okay, this is the start of week 2 of plants life, as i stated in the previous week I bought a chiller with a compressor because the one that i bought previously did not work, so far had to change the bulkheads because of leaks and it seems that leaking just ended, so today i finally put some fresh water into the system and things look great. pH was 5.85, ppm 49, no juice is added yet, I'm suporting the humidity witha humidity dome over them and PPFD is 250-ish, can't adjust much, the lights i've got dont have a dimmer box , because of the lack of that some of the initial leaves did burn but eveythings nice so far. Will continue to update as I go, but for my first hydro I'm exhausted, learned a lot and wil continue to do so. Also!!!!, if someone comes by can anyone tell me WHY on earth one of my bucket fills more than the others??, i have 3 25w pumps, saame pumps distributing water and one of them is ALWAYS fuller than the others, ahd to adjust the knob that the pump has to level them out, and even after taht is not perfect.
NL twins Outdoor
Foffy
@Foffy
Follow
Looks great, flowers are growin nicely! Very small and compact little plants. I guess they gonna be like 30-ish grams, eventually The straight one smells too much, Northern Light shouldn´t be doin that, not good! I can smell her on my terras 😮 hope neighbors don´t... Great top on the one plant, flowering very nicely on the other one. Some animal is chewin on leaves 😮 unacceptable Looks great! Flowers are doin great on both. I would like to keep them another month, but they are doin very well, might not take that long 👍 so exciting 😛 They look SO F good!! Sweet flowers on both of them. One smells way too strong. Bottom leaves are chewed/picked off... I´m in love with these flowers! They look so cool! ❤️
Purple Kush Outdoor Organic Amendments
Chi_K24
@Chi_K24
Follow
Hey folks. Into week 11 and the ladies are doing very well. Recovering slowly from a fungas gnat infestation that I caught pretty late. I got careless and wasn't really paying attention to the topsoil. Also to boot, this was only an issue once I started to water with molassas. It seem to attract the bugs either via sugar for from the supercharged biosphere. Not sure lol. I treated the topsoil with neem oil drench and applied yellow sticky pads and d.e. powder to the top of the pots. Cheers.
Creamsicle#10 X ZkittleZCake
Im feeding her steadily at around 825ppm every morning monitoring any possible deficiencies. I did defoliate quite a few leaves from the to[ and bottom once I felt that she is thriving happy and growing more vigorously during the stretch. I raised the light a full 2 feet. during week 1 and now at the end of week 2 the tallest stalk is about 14 inches while most are around 20. reason for a few stalks being taller is because of what happened when our 3rd plant ended up being a male during the transition to 12/12. Im not gna try anything crazy to try and fix it. Obviously there are no problems so dont fix whats not broken I guess. Have a great week !
Eight amazing strains in a 4x4 / ORGANIC
SWITCH420
@SWITCH420
Follow
Hi folks, I'm coming here to start the process of ending this grow journal. I harvested about three months ago and the weed is definitely cured. Photos are about to come — I'm doing a real studio photo shoot for those buds, they deserve it! While waiting for the shots, I made some pretty damn dank hash temple balls using the iced water extraction method (solvent-free) with my little washing machine. It's a mix of the 8 strains I grew here — never ideal to mix different kinds of resin... but man, this is some serious dedicated work, so I'm making myself happy with that 14g shiny temple ball in the end 😉 Here are a few details about my process for you guys (and don't forget — you can do it with fresh material! Fresh frozen is always tastier. Also, the drying process is much more efficient and faster with a freeze dryer, but... you need the budget for that. I don't, so I go with the air drying method — check it out below): 1. Get your dry trim, then cure it properly for at least a month (I did 3 months). Smell it — mmh, sweet, dried to perfection. ✅ 2. Freeze it, delicately wrapped in a freezer bag. 3. Let a large amount of tap water sit for at least 24h to remove chemicals like chlorine, then use it to make plenty of ice cubes — don't be shy, especially if you're not working in a cool environment. 4. Prep your washing machine: add trim between two layers of ice, fill up with clean water (as much as you can, large vortex is better than a smaller one), then make it seat for 30 min (45 min for thicker buds) the time that the dried green material gets wet again. 5. Prep your filtering tools: catch bag, different mesh bags, spoon, etc. 6. Wash as many times as you can before green contaminants appear, as these lower the quality of your hash — don't hesitate to go up to 8 to 12 washes if the resin still looks clean! Important: each wash has its own specific duration, and they get progressively longer as you advance through the process. Frenchy Cannoli (a true hash legend) provides a detailed timetable for this — from as little as 30 seconds to 1 minute for the first wash, all the way up to around 25 minutes by wash 8. Make sure to follow that schedule rather than using the same duration for every run or running it too long the first wash !! It could breaks to quickly your precious material before you collect all the trich's and the quality would be lower in the end. 7. Collect the wet resin in the mesh bags with a frozen metal spoon, make patties with the resin, and let them sit over some towels in order to drain as much water as possible (place a tissue made for hash collecting over the towel). 8. When the patties are a little dry to the touch, wrap them as they are in the tissue and place them in the freezer for 48h or more. 9. With an iron strainer, microplane your patties over the biggest flat surface you can get! It's important that your micro pieces of hash dry widely and don't get too compacted. Any failure in the air drying process will nucleate rot, ruining your hash in the end and making it a poor product — eventually something to throw away. Sad when you think about all the phases of the process to get to this point! 10. So, in order to air dry properly, you must — it's not optional — lower the RH of your dry room to 35% or slightly below, never above and let it dry as long as needed until the material feels like dry sand. For myself, I found 10 to 15 days is ideal. The room must be very lightly ventilated (not directly on your resin!) and in complete darkness — the goal is to preserve all those delicious terpenes! Ideally, temps around 60°F or 16°C 11. Now that it's dry, collect your resin with a large thin spatula! Make a little mound between two layers of PaperHash, boil some water, and fill up a wine bottle with it! ⚠️ From this point on, to avoid exposing your carefully dried resin to a more humid environment — which could ruin all your hard work — everything must happen in the same drying room. Keep working at 35% RH until your temple ball is tightly and airtight wrapped in PaperHash. (And don't forget to drink water — it's dry in there! 💧) 12. Start to slowly press your resin. Magical moment. Finally.... 13. Press 3 times for 10 to 15 minutes in order to really decarb your hash — because that's what it's all about! Between each press, try as best you can to shape a patty... until the final press, when you'll be able to form that magical shiny temple ball (it only shines with gloves on, guys 😄) 14. You are now allowed to try it — for quality control purposes only, of course! 15. Because you want to age your hash for the sweetest 5-star smoking experience: wrap your temple ball in a large piece of PaperHash — if you can get that brand it's ideal, or another kind (check https://thepressclub.co) as long as it's organic! 16. Place the wrapped temple ball in a glass jar and store it in a dark, cool place. 17. Wait a minimum of 3 months before opening it. 18. Open, smell, touch — you'll be amazed. Roll it up with some weed or tobacco or both (I do both) / Or get a Hooka... you are smoking some true primo aged hash made by yourself! Taste the difference and realize all the path from choosing the seeds online until this first amazing puff ... 🙏 I want to credit my inspiration for making this kind of hash to the great Frenchy Cannoli, who has shared all his knowledge through amazingly rich tutorial content that you can find online with a bit of searching. 😉 Peace Frenchy 🕊️☮️
LEAF - Skunk #1
2/22/24 - Day 108 - ok yall harvest is done! I'm exhausted! It took about 3hrs. There were a few things that I will highlight the differences. I have tons of pictures and video to go through. I'll update later...... I'm tired! 2/23/24 - Day 109 - Everything went really well yesterday. I was able to cut the harvest time from 9 hrs last time to 3 hrs this time. Here are some of the details on this. Last time I hung each branch on its own, it took forever to use the twist ties and then to hang each one. This time i used some drying nets. The only problem with the drying nets is for sure there will be one side that is going to be flat..... it's still going to smoke the same and if it saves me 5 hrs. then I'm doing that. LOL I also decided this time not to wet trim the buds before putting them up to dry. I did remove fan leaves that had 0 THC on them, but if there was a leaf sticking from a bud and it had THC on it i left it. That also saved me some time. The bud quality was better this time around, the buds are denser and more compact. I also had almost NO popcorn buds. The last grow I had 2 to 3 ounces in popcorn schwag buds. They were tasty and great but this time around every bud was a legit contender. This could be due to having more space, I used an Auto in the box this time. I thought Autos would be difficult to control in this space limited environment, but it was the exact opposite. It's just as easy if not easier to grow an Auto in this Magic Box. I think its important to note that anything I talk about here is from my own experience, I've purchased everything with my own money and no one pays me for my reviews or details. This is such a labor of LOVE for me. They day I get a job in the Cannabis industry is the day I stop working, at that point it would just be me living my dream having a BLAST! That being said if you would like this same exact experience here are the tools i have used. Growing Box: www.getleaf.co Seeds: www.Sensiseeds.com Strain: Skunk#1 Curing Bucket Controller: www.ACInfinity.com Last thing I want to share before my next update of dry weight. If you want to see even more photos and videos from my last grow (GovernMint Oasis) along with any new grows im working on you can check out my Instagram (@ChumpkillaOG). I update almost daily with new details on my grows. Ill go into more detail on how or why I did something. I have not posted about this Skunk#1 grow yet, that will be the next few weeks' worth of content. So, if you want to see a lot more documentation throughout these grows check me out @ChumpkillaOG. I would absolutely appreciate the likes, shares, and follows! 2/25/24 - Day 111 - There was no place that I saw to add the dry weight. I finished the harvest today and now it sits to cure. Final weight 364.5gams! Not quite a pound but very close! This strain came out really well, the bud quality with this strain is better than the last grow. It only gets better. See yall on the next one!