Runtz - Zamnesia Seeds "Our girl is thriving and steadily gaining mass, feeding happily on nutrients from Plagron. Daytime temperatures are sitting at 28°C, with nighttime temps between 19°C and 22°C. Humidity levels are kept around 55%. She's doing great and we can't wait to see her full potential!

Step by

Sky Walker ~~~~~INDOOR~~~~~ DAY 77 Above Dirt 💬SATURDAY - 11.11.23 These ladies continue to blow up, I moved them into a 4x4 space under the Mars Hydro FC-6500 I am going to look at some defoliation and pruning, they will be moved over into 7-gallon pots, then some final tie-downs added into the training, also started a compost tea today, see recipe below. 💬SUNDAY - 11.12.23 - The ladies like their new space, today I defoliated, topped, and pruned out the lowers, and insides, once these girls are moved over into their new pots, will be flipping these massive bushes! ~~~~~~~~~~~~~~~ 🌱Sky Walker 👨‍🌾🏽Sativa Jones 🌤️@Medicgrow420 SeedBank Seeds 📝@gaiagreenorganics 📝Bokashi Biochar ~~~~~~~~~~~~~~~ 📝 Skywalker OG Strain is a top-shelf Indica dominant hybrid. It is a cross of Original Amsterdam Blueberry, OG Kush, and the indica strain Mazar from Afghanistan, and is best known for its super potent effects and sky-high THC levels. ~~~~~~~~~~~~~~~ 📝 Compost Tea 3 Gallons of Dechlorinated H20 3 Cups Malibu Compost 2T Molasses 2 T Alfalfa Meal (DTE) 2 T Kelp Meal (DTE) 1 T Bat Guano (DTE) 1 teaspoon Rootwise Bio Elixir 1)- I used a small paint strainer to hold my composts, placing an air stone right in the bag and zip-tie it nice and tight - this allows air bubbles to really agitate the micro matter off of the compost and into your tea 2)- I like to mix in the molasses (microbe food) and start my main air stone, the dry amendments and Rootwise can be just measured in the bubbles 3) - Keep the temp of the water warm to 75F/85F - too cool and the microbes reproduce too slowly and too hot will kill them. I do not delete my teas and let the plant pots dry out slightly before feeding.

Overall this was a wild grow. Had some ups and downs, trial and error, but at the end of the day I learned a lot and I’m going to keep on trying new things. Wish the solo cup challenge was still going on I totally would have won.

Week 13 - a cute visitor! We've had strong winds, so I made a little support net with some hemp string. Tbh, I just went with my inuition: knots here and there and strong support. Let's hope this will do the trick. Temps are lower this week but humidity is up. Sun keeps shining. This should be a good harvest. Another 10cm growth spurt. That's more than 1cm per day. I should hear her grow at this speed. Also, the leaves on this one. She really means business. It's almost a full time job to keep her in check. But I'm only here on weekends and I think she likes that. 5 days of undisturbed growth until it's time for a little leaf shedding. She's doing and looking great. I found a tiny critter enjoying some leaves, luckily my cats keep them at bay, so no damage.

ALL THESE PHOTOPERIODS WILL GO IN THE 8X8 TENT ONCE THE AUTOFLOWERS ARE CHOPPED AND I WILL SWITCH THE LIGHT TO FLOWER THEM IN THERE FOR MORE ROOM FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Flushed her for 3 Days, after that i didnt give her any water for 2 days, and now she is going in the dark room for 2-3 days and then will be hung. Had to cut one Main-Cola due to Mold. The Plants are growing awsome, strong smell, and rock hard nugs in all colors. Its now the last week, she has been in flower since 8 weeks. Be ready for the harvest and the smoke report ;)

Ich hatte zwischendurch echt bange dass die auf die letzten Meter schlapp machen🙈 für nächstes Jahr hab ich es anders geplant da werde ich 3 mal umtopfen damit ich nicht wieder solche Probleme mit der Nährstoffversorgung habe und wenn ich Probleme mit Viehzeug haben sollte mich denn auch darauf konzentrieren kann nicht das alles wieder auf einmal kommt

Wasser, Sonne, das war‘s.

day 42 images are in last week, I can not count XD. bridal is stacking a lot of weight and is constantly shifting/leaning every morning, good things. I would chop any day but I will wait it out. water, tiny bit of humic and folvic to reduce chloromine, chlorine- air stones day 45 took a few nugs off on day 42, dried for 3 days. Tried bridal and blackberry. As a heavy recreational, thc is up there! bridal felt like having a blindfold over your eyes somewhat sativa uplift but heavy weight feelings. Very good. Lasted as good as 30%'s. Dr. Thunder was also very nice, nug was smaller so mixed with blackberry to have a small j. Also feels very good indica. Both trials were chopped on week 6 day 1. Very pleased with the results. I was worried bridal was more sativa; which charasteristica I am not looking for. So I believe this is a very good heavy hitter run with 4 plants. I can chop any day, but I am waiting for pink paradise to finish seeds. day45 took top nugs from bridal party, blackberry oreo bigstuff and dr. thunder. No touching pink paradise!! day 46 can chop anytime just waiting on pink paradise seeds to finish, bridal party leaning more day 47 bridal leaning hard from weight. day 48 stacking, day 48 video

Journal de Culture : Frost 1 (Semaine 6) ​Génétique : Frostbanger (F2 Perso) | Système : Autopot 20L ​📣 Remerciements ​Un immense merci à toutes les personnes qui suivent ce journal depuis le début ! Un grand merci en particulier à @MIA_BIOTABS et à Mrs_Larimar pour leurs précieux conseils toujours aussi utiles. Merci à tous pour votre soutien ! ​🛠️ Configuration Technique & Gestion de l'Espace ​Éclairage : Lumatek ATS 300W Pro (réglé à 75%) ​Distance lampe/canopée : 52 cm (obtenue de justesse après domptage) ​Climat : Jour : 25°C / Nuit : 21°C ​Humidité (HR) : 50% ​Tente : 1m80 de hauteur ​📅 Évolution, Changement d'Espace et Domptage du Stretch ​Observations Phénotypiques & Réorganisation de la Tente : Sur cette session de Frostbanger F2 perso, la stabilité nous montre deux phénotypes bien distincts qui ressortent entre elle et sa sœur : un phénotype violet et un phénotype plus vert. ​Grand soulagement dans la box : nous étions à 4 plantes au départ dans cet espace. J'ai enfin pu déplacer les deux MAC 1 dans la tente qui leur était initialement prévue. Avec le recul, je me suis rendu compte que l'une des MAC 1 avait pris une envergure tellement énorme qu'elle masquait et bloquait le développement de nombreuses branches secondaires sur les trois autres plantes ! ​Aujourd'hui, la structure de ma Frostbanger est vraiment très belle, mais je reste persuadé qu'elle aurait pu être encore plus impressionnante si elles n'avaient pas été entassées à 4 au début. Maintenant qu'elle a de la place, elle va pouvoir s'exprimer pleinement ! ​Le combat contre la hauteur (Nouveau LST) : ​Hauteur maximale atteinte : Libérée de ses voisines, la demoiselle a complètement explosé sa croissance verticale pour culminer à plus de 87 cm de hauteur ! ​Action : Face à cette poussée ingérable et pour éviter qu'elle ne finisse brûlée dans le panneau, j'ai dû ressortir les ficelles et refaire un gros LST pour la coucher et contraindre sa structure. ​Hauteur après LST : 78 cm (Ce qui nous fait tout de même +10 cm par rapport à la semaine dernière, tout en ayant gagné 9 cm de sécurité grâce au pliage). ​Le casse-tête du Système D pour la lampe : Avec un pot de 37 cm de haut, le sommet de la plante après son palissage culmine tout de même à 1m15 du sol. ​En ayant supprimé les attaches d'origine qui me faisaient perdre 10 cm pour la suspendre au plus haut directement avec des ficelles (système D), mon panneau est calé à environ 1m67 du sol. ​Cela me permet de maintenir mes 52 cm de distance de sécurité avec la canopée. ​Si je plaque la lampe à fond contre les barres de toit de la tente, je n'ai plus que 10 cm de marge de manœuvre totale pour toute la fin de session. C'est très serré ! ​Nutrition & Gestion Autopot : ​Action : Je viens tout juste de couper l'arrivée d'eau de l'Autopot. ​Objectif : Je laisse le pot sécher tranquillement pour les prochains jours. Dès que le substrat sera bien sec et aéré, je lui ferai un arrosage manuel pour envoyer le PK 5-8 de chez Biotabs afin de donner un grand coup de fouet aux premiers pompons qui pointent le bout de leur nez. le 21/05 Apport de 0,75 cl d'eau avec 4 ml de PK 5-8 biotabs PH 6,3 ​Résumé : Le grand ménage dans la tente et le nouveau palissage ont permis de rééquilibrer la canopée. Les branches secondaires, enfin libérées de l'ombre des MAC 1, vont pouvoir profiter à 100% de la lumière. Malgré l'espace restreint en hauteur, la plante affiche une santé resplendissante et commence à bien cristalliser. ​À bientôt pour le premier engraissage PK !❤️

She went for way longer than i thought! I really do think yeild wise she would have been a monster if she stayed under 18h of light instead of the 15h of light outdoors.

Only 3 out of 8 turned out to be females. 5 male ones were culled a week ago. 💀 Today I transplanted them to final - 26L - fabric pots and moved into flowering 4x4 ft tent under Mars Hydro FC 4800 (466W). They get around 650 μmol/m²/s for now - will crank it up in a few days. I used Canna Terra Professional substrate - as always. After they get accustomed to new pots I'll flip them to flower - in about a week. 👌

Started the week with a plastic dome to help with humidity, and after six days the dome was not needed anymore. The seedling outgrew the dome. I keep the watering very light during the seedling stage to make sure there isn’t any overwatering. I take my photos about 24 hours apart

Didn't have a lot of time this week so she missed her waterings for a couple of days, also didn't empty the dehydrator so humidity was up a few days. Installed a second cheap blurple led on the side, but doubt this will really help much. Having some trouble keeping temps up as winter is coming and I dont have a heater in my garage

prime 2 piante tagliare......hanno un profumo speziato dolce, buonissima 🤤

The second week of flowering and they're absolutely still stretching, hopefully it comes to a stop before the tops reach a 55 DLI level - height 😅 They've been so thirsty and blooming wonderfully! Even the two pots with my pollen chucking Do-Si-Do/Blue Blizzard cross have been doing well 😎 Even though they haven't been top dressed or had direct light in a month! It's almost as if they grow like weeds 😆 It's been a pretty easy time so far, I think I might even be done tucking branches as I've got a canopy that's even enough for me. Thanks for the read and take care!