Day 56 Jungle Jimmy / Day 57 Pink Cookies: Nothing to do today. Day 57 Jungle Jimmy / Day 58 Pink Cookies: Nothing to do today. Day 58 Jungle Jimmy 63 cm / Day 59 Pink Cookies 90 cm: Nothing to do today. The outside temperature are getting high right now, so the temperature in the tent increases as well. I hope I can manage to keep the temperature about 30° C. We are at day 19 after switching to 12/12. The bud development is quite impressive at this time. Day 59 Jungle Jimmy 66 cm / Day 60 Pink Cookies 93 cm: Nothing to do today. Day 60 Jungle Jimmy 68 cm / Day 61 Pink Cookies 96 cm: Nothing to do today. Day 61 Jungle Jimmy 68 cm / Day 62 Pink Cookies 98 cm: Nothing to do today. Day 62 Jungle Jimmy 69 cm / Day 63 Pink Cookies 99 cm: Nothing to do today. -------------------------------------------------------------- 🙏 Thanks for visiting and follow for daily updates 🌱

La tercera semana ha ido bien, han estirado menos de lo que quería debido al exceso de agua, aprendido para la próxima. 📅 Dia 22:🔹 Continuo con el Low Stress hasta que dejen de crecer. 📅 Dia 23:🔹Descanso ( no estoy en casa) 📅 Dia 24:🔹Riego según la tabla de nutrientes, EC 1500 , PH 6.3 y un drenaje del 10%. 📅 Dia 25:🔹Las dejo que terminen de estirar tranquilamente. 📅 Dia 26:🔹Descanso 📅 Dia 27:🔹Riego según tabla de nutrientes semana 4. Aplico toda la cantidad de la tabla, ya que con el CO2 comen mucho.

*=UPDATED=* looking about the same again, nothing much is changing other then the new flower growth has slowed and some of the trichomes are turning amber. the one plant has thick buds and the rest are average. Harvest maybe next week or the one after if I get the time I need, I want to first take off all the extra fan leaves "half ass'd defoliation?" and let it sit in darkness for two-three days, help it breakdown some of the chlorophyll and should make the cure much nicer. first time trying this, may leave one plant in normal light and hang dry it to see if it makes a big difference. Had a bit of powdery mildew on some of the lower bud sites and baby leaves on one plant, I believe this was because the fan in the case was broken and not replaced. Corrected it by spraying the area with a peroxide mix and increasing airflow. *=UPDATE=* the one video I uploaded for this week was not working. So retrying it again today.

Lemon Cake week 18 7/28 - 8/4-10 I am late for my outside ladies diaries updates. Life has been getting the best of me lately. I’ve been packing my daughter’s room and moving her things to her new home. For those that have followed my since my beginning here, Cancer left me with neuropathy and arthritis in my hands. I can no longer do my glass fusing or flame work. To close this chapter of my life, I’ve been inventorying glass, tools, equipment, molds and supplies to sell. The most stressful has been appealing Medicare claims and receiving the second denials on the same claims. They are the last payer of record so good luck getting any reimbursement you are entitled to. My apologies to all of you for being so brief on your diaries and not providing many comments. Photos are from 7/28- 8/9 for both weeks. For my outside ladies, Opium, Auto Opium, Fractal, and Lemon Cake not much changed. They continue to live in sweltering conditions. Temps are in the upper 80-90s with humidity over 105. In addition to the heat, Hurricane Debby started up the coast but was downgraded to a tropical storm by the time it got to us. Expecting our normal thunderstorms, I waited til morning to bring the ladies inside. Overnight, we had wind gusts of 25mph. Yeah, then I brought all gals into the house. The photo gals are strong and with thick stalks were able to withstand the winds. I top dressed all ladies with Bloom Soil for organic fertilizer. Buds are fattening up, trichomes are minimal at this time but some fragrance is starting to be noticed. Thanks for the visits, likes and comments, I appreciate all the plant love💚. Have fun & love what you grow 💚 Sending you good vibes of love, light, and healing 💫 💫Natrona 💫

Bueno, en el inicio de la fase de floración, hemos cambiado la solución nutritiva con ml x ltr , metí la red scrog y he notado que esta cepa se estresa con facilidad, tras el cambio de agua y nutrientes y la red quedaron full stress, poverine... Empiezan el fotoperiodo con mucho olor a vegetal y esto me hace temer que tendrán mucho olor los futuros cogollos... esperemos tener suerte también en este cultivo. Estoy muy contento, no pensé que gracias a ZOE SPACECAKE me iba a apasionar tanto cultivar el cannabis.

Empezamos su día 16 de floración con un buen puñado de nutrientes repartidos en dos tomas. Las plantas ya desprenden un ligero olor generalizado, hora de encender filtro y más potencia al extractor. Dentro de unos días dejarán de estirarse para centrarse en la producción de las colas, hasta entonces, haremos la última defoliación de bajos para dirigir la ventilación en ese punto, así, por mucha humedad que tengamos, jamás tendremos hongos. Feliz semana, buenos humos.

This week I pruned and defoliated heavy. Removed every fan leaf and removed everything before the scrog. I didn't get as horizontal as I would have liked but I'm hopeful I won't burn tops bcuz I'm close, lucky I have the light rail moving the light atotal of 3 feet back and forth allowing me to use more intense like but in spurts. Also the co2 bag and co2 bucket really seem to be helping. Topdressed with endgame and loaded up with basilus, activated em1, orca, great white, king crab, mammoth p, ohn, yucca, alow flakes, count powder, root wise poder and enzymes. Also weekly to every other week I make compost tea from boogie brew. All my water is treated with drops of balance and I also collect and use rainwater. I have an irrometer and run from 10 to 15 kps

not that easy to trim - pretty dense buds

viel passiert nimmer im wuchs... noch ausreifen lassen...trichomen produktion merklich erhöht... denke in 2 wochen sind sie fertig 😛

Too Tall, Almost touching LEDs and lightburn is becoming an issue as well as the outer parts receiving too little light. After some more desperate attempts at LST and even fumbling the scrog net on top again..... The girls need to move out of the budget home and get something proper! Never thought the additional growth during flowering is this much x)

Day in and exit fan 15 min off 15 min on Van is full on Night in and exit fan 30 min off 15 min on Van is off Lst tranings return Nutrients started 0.5gr/1L at day 21 400ML Per Pot Day 24 Grow powder 0.75gr/1L Short Flowering 0.5gr/1L 400ML Per Pot Day 26 Grow Powder 1.5gr/1L Short Flowering 1gr/1L 600ML Per Pot Day 28 Grow Powder 1.5gr/1L Short Flowering 1gr/1L 600ML Per Pot

142.nap A trainwreck szépséges😁😁a héten megfogom ajándékozni őket egy kis vitaminnal💚💚💚 Mit gondolsz adjak nekik lő port?

She is growing so fast and super big beautiful fan leaves all over my lst is working well and she will be flipped into flower once the smaller one has vegged for a few more week and the autos are finished up don’t forget friends It’s 420 somewhere™️

Esa familia, ya estamos a mitad de floración como quien dice finalizando la 4 semana , y es que están cogiendo unos tonos también, esos colores rojos y morados que están entonando😈 Tuve que tuitear las 5 plantas de un armario ya lo visteis y las puntas se dirigen hacia la luz. Cómo podéis observar en las fotos y vídeos. Algunas se sobrealimentaron porque no todas comen igual pero reduci la alimentación solo en esas y ya se está solucionando. Por lo demás , pronto empezaré aplicar el overdrive junto con el bud candy unas semanas más. Las temperaturas en estos indoors son perfectas y la humedad relativa es correcta. Hasta aquí es todo espero que os esté gustando, buenos humos y feliz navidad 💨💨💨

https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

Se realiza transplante a maceta definitiva de 20 LT AIRPOT Sigue el riego día por medio

11/3 - Today is technically the first day of Week 5 and also the first day I could see a visible drop in her water level since her last check-in (~12 hours apart). As a result, her ppms shot up to around 800. I diluted the solution with straight tap (7.5pH, 170ppm) since her pH was registering around 5.3. This brought her up to 5.6pH and 670ppm (1.0ec + tap, 500ppm of nutrients). I would have liked to adjust her pH more, but the water level ended up at the bottom of the basket. I'll adjust further as necessary. The other day while attempting to LST her top branches, they ended up snapping off, so I just topped her down one node and broadened her other LST to make her as squat as possible. Once I am able to find a suitable individual ScrOG screen, I will put it on her. 11/4 - I wasn't even planning on doing an update today, but I want to note a few changes. The first of which is a visible difference between her foliage density in a span of 36 hours. Her root bundle is over a foot long and getting more wound up every day. I removed her LST ties in order to take advantage of the ScrOG screen apparatus (see notes below). After lights came back on, she measured 645ppm and had another notable drop in water level. Currently, I am preparing another nutrient solution that closely matches what she is feeding on now. I will be upgrading her to a 5 gallon bucket. I will be aiming for 1ec of nutrients/additives (500ppm + Tap on my meter, Hanna Primo .5 conversion). Tap measured 180ppm, so target ppm would be 680. Later that same day... So I finished upgrading her to a 5 gallon bucket before I actually got done writing the update. Added one photo showing new 5 gallon setup. Solo ScrOG test mk1 - In an attempt to do a ScrOG, but maintain control over each bucket, while still having relatively easy access to each reservoir, I decided to throw together this little contraption. I removed the lowest complete segment of a tomato cage, leaving a short "tail" beyond the lower ring to act as a peg to insert into corresponding holes in the lid. The lower ring is 10" in diameter and the upper is approximately 12" in diameter. Each ring is 11" apart. I would prefer to have a shorter segment, but I haven't worked out exactly how to do this yet. I would prefer to set the screen height at around 6" above the bucket instead of 11". This will have to suffice for the time being while I let my latent conscious work out a solution or one is provided by the community. Above each cage will sit a coated wire fence with grids measuring ~2"x3", as shown in the above picture. 11/5 - Uploaded short video showing Solo ScrOG Apparatus in place. Screen height currently set to 6". Thanks for stopping by my garden, and, as always, Happy Growing!