Likes
6
Share
End of week 4 and I have a bit more to report this week. On day 22 I topped this girl and she was a little slow to react, turns out my thermometer was in a bad spot and the girls were getting hammered by the heater 🤦‍♂️ lesson learned. Since re-positioning the thermometer they have bounced back and happy as Larry again, thank goodness. On day 27 i had brewed up my first compost tea and fed them a bit more than usual. The tea had a cup of Herbi's brew starter, a cup of work castings and a cup of organic compost. They loved it. I used the remains as a top dress afterwards. Today, on day 28, I defoliated and started LST, she's praying to the lights right now and I'm stoked! Hope you've all had a good week and thanks for checking in 🙏
Processing
Likes
39
Share
👉With each day it grows a noticeable amount. Its staying short and the leaves are actually touching the media on the lower set. Its actually on its 3rd node, and i will probably top it on the 4rth. I lowered the light from 36 to 24". This week i will lower it again to 18". The plant is short but its growth is still vigorous enough. under the leaves there is vegitation emerging as well. I like the fact that its staying short, I will probably need every inch of of my tent so the longer its stays short and grows like a bush, the better. 👉Im doing the week 3 nutrient schedule for another week because week 3 is the highest levels of grow nutrient. My EC target is 1.7 and is near the high end of the recommended range. I usually start with 2 gallons and then mix and pH the batch. If the EC is high I then ad pHd/calmag/ArmorSI water to lower the EC to the desired range. Im feeding 1 liter of nutrient solution and the runoff is an average of .6l. I give this 2x a day. The EC is slowly creeps up over 3-4 days and when it gets to 25 to 30+ EC I use a liter of rinse solution before the next fertigation. the rinse solution is same water source as the nutrient mix, (RO water at 5 micro-Siemens from a medical grade RO unit) with Armor SI and Calmag pH's to 5.9. The machine isnt at my house so I mule the water in 6 gallon water carriers. Eventually the plant will be big enough that more solution is needed at each feeding. During the Critical Purple and Hindu grows, the EC would actually never guild up because the plants were absorbing a lot of the nutrients. I will gauge the needed inflow volume of nutrient solution by the amount of run-off. Currently 1 liter is what I determined is the minimum needed to keep the coco wet and buffered. As the plant absorbs more water the drain off will decrease. I will target 20-30% run-off from inflow volume. EC value also determines inflow volume but to save on mixed nutrients I like to precede a feeding with the rinse solution if the EC is too high. 👉I disinfect the water jugs 1 time a week with 1% bleach. I disinfect my nutrient solution dispensing jugs at each batch mixing. My watering can and measuring vessel, I rinse with the H2O2 spray at each use. 👉To help keep the grow clean I have a 1 gallon garden sprayer filled with water and 60ml of H2O2. The recipe is usually just 30ml/gallon, but I wanted it a little stronger. I spray the exterior of my cloth pot once a week to rinse of the build up nutrients and prevent mold, mildew and green fungus. I also use the spray to disinfect the drain trays as I swap them out after a feeding. I have a couple dozen white wash cloths that I use to help clean and dry things. I use fresh wash cloth each day, and keep everything as clean as possible.
Likes
18
Share
Hey fellow green thumbs! 🌿💚 It’s harvest time for our Auto Fat Pete’s Cookies from Super Sativa Seed Club! After an exciting journey, we’re thrilled to share the details of this unique plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our Auto Fat Pete’s Cookies was harvested yesterday. While the flowers turned out less dense than expected, the amazing smell has us super curious about the final product. 🌿🌸 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Fat Pete’s Cookies: • Bud Structure: The buds are not as dense as we’d hoped, but they are still sticky and resinous, showcasing a beautiful array of green hues with hints of purple and orange pistils. • Aroma: The aroma is incredibly strong and delightful, filling the grow room with a sweet, cookie-like scent that hints at the strain’s name. 🌿🍪 • Trichomes: A generous layer of trichomes covers the buds, promising a flavorful and aromatic final product. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Fat Pete’s Cookies: • Characteristics: Known for its sweet and cookie-like aroma, this strain has shown remarkable aromatic qualities throughout the grow. Despite the less dense flowers, the strong scent and generous trichome coverage promise a high-quality final product. • Harvest Expectations: Sweet, aromatic buds with a rich flavor profile. The slower drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ The aroma of a cannabis plant can be a strong indicator of its final flavor profile. Strains like Auto Fat Pete’s Cookies, with their unique and strong scents, often translate these aromas into delicious, flavorful buds. For a detailed grow guide and to see this strain in action, head over to my YouTube channel! 🎥✨ I share tips, tricks, and in-depth reviews to help you get the best results from your grow. This week’s harvest has been particularly intriguing, and I’ll be explaining the reasons behind the less dense flowers in detail. 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Fat Pete’s Cookies at Day 75 has been an interesting and rewarding experience. While the buds are not as dense as we hoped, the strong aroma and generous trichome coverage give us high hopes for the final product. With the plant now drying, we’re eagerly awaiting the final outcome. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a sweet and aromatic harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #FatPetesCookies #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚 Discount Codes : @thecannakan DOGDOCTOR 15% off @theneutralizer PORKIT7-DOGDOCTROSO 17% off @kannabiaglobal DOGDOCTOR 30% off @seedsmangenetics DOGDOCTOR 10%off @terpyz.mutant.genetics DOCTOR 15% off
Likes
2
Share
Vamos familia, actualizamos la sexta semana de crecimiento de estas Lemon Mandarin de FastBuds. La temperatura que estuvo entre los 24-26 grados y humedad dentro de los rangos correctos. Todavía estamos en el ciclo 16 horas luz, 8 oscuridad, estiraron bien y ensancharon bastante también, el color es verde sano. Se nota que los nutrientes de la marca Agrobeta hacen sus funciones. También realicé una poda de bajos que yo si las veo necesarias para explotar después la flor. - os dejo por aquí un CÓDIGO: Eldruida ,descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨
Likes
14
Share
@TOMI08
Follow
31naposak ma 4nap telt el supercropping óta 2napja háló alatt vannak
Likes
8
Share
2 plants made it to harvest. Small nugs, about an ounce per plant dry. A lot of frosty trim and small nugs I’ll be using for hash later. I had rooting issue when I flipped to flower that definitely negatively effected nutrient uptake. Small yield but quality is good. Smells almost like a sugary jelly bakery. Cured for a week, tastes sweet almost.
Likes
21
Share
The plants hung in the grow tent with the exhaust fan running low for 10 days with an RH between 45-50%. 80 grams at trim from 3 Blueberry Autos. For a first time grower, I tried to let the plants do their own thing mostly, aside from some lite defoliation and tucking. In doing this I see ways I can improve. After curing for 10 days, first sample was not disappointing. (I intend to cure it at least 1-2 months.) Sweet berry aroma when chopping up the bud. Smooth burn with white ash. Can get a hint of berry flavor in the smoke however it also is not ready yet. But I can almost predict the possible flavors after curing. I believe a strain like Blueberry benefits from longer cures of a few months or more. I will attempt to give it as long as possible. Overall impressed with the grow and look forward to the final smoke. Ready to apply what I've learned and improve on my next grow.
Likes
175
Share
_____📅 Week 15 | 8nd week flower | 📅 Day 113 - 120 | 03.05 - 09.05 ______ 03.05 | Day 105 🌞 🔸Okay...we are getting close to the finish line...The buds have swollen a bit in the last week...They are not the biggest, but they look and smell like the biggest...Trichomes are also looking quite good and are plentiful (I still have to learn something with the microscope hehe) but it is enough to get an overview... 🔸It has been quite warm in the tent for the last 3 days, sometimes up to 29° - not ideal, but I don't have air conditioning either. 🔸I only add water with Cannazym and Bloom Booster, so EC=0, as my water is 0.5, so my nutrient solution for the last week has 0.5 EC and 5.6 pH. She still drinks about 1 liter a day, but it has become less. So the nutrients are steadily decreasing. 🔸I think I will harvest them in the course of the week...that fits quite well as the temperatures are going down again. I'm looking forward to giving the others more space and light. _____________________________________________________________________ 🌡️🔆= 25-26° 🌡️🌜= 19-20° 💨 Hum. = 55% 🔦 PPFD = 800-900 umol 12/12 🔦⌚DLI = ~35 ___________________________________________________________________ Equipment: Flower 💡2 x 200 Watt Cosmos LED 💡2 x Glow80 Spider-Farmer (4x40Watt) 💡1 x SF-600 Spider-Farmer ⛺120 x 120 x 200 Tent (4 x 4 x 8) 🍯 18-20 liter Bucktes
Likes
2
Share
Holaaa, aquí tenemos la segunda semana de las GingerPunchAuto de la familia de Kannabiaseeds. Están creciendo muy bien lo que una de las plantas me está costando recuperarla, pero voy hacer todo lo posible para sanarla. pronto nuevas notícias. 😘
Likes
5
Share
First week of flower in the bigger tent and on the Autopot xl smart pot system. Trying a new product on this run which is rock resinator which starts on Monday. Will leave these now to grow through out each week till day 20.
Likes
76
Share
@Roberts
Follow
Purple Ryder auto is growing great under the Medic Grow Mini Sun-2, in the Agrogardens nutrition. She has a great canopy full of budding sites. She is starting to develop a aroma as well. Everything is looking really good, and she is ready for another week. Thank you Medic Grow, Agrogardens, and Doctors choice. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Processing
Likes
10
Share
@Jd1971
Follow
If it's not broken don't touch it just water it
Likes
73
Share
@PsiloNoid
Follow
Starting week 1 of flower on this Bruce Banner Auto from FastBuds! She has been a pleasure to grow so far! Had some minor issues dialing in her water amounts last week but she is starting to look better. Im sure last week put a hurting on growth rate but she will still produce nicely. More updates soon! Day 45 she is starting to perk up more and finally stretching out some! Still monitoring her situation closely though as she does have some slight yellowing around the edges but it may of just been watering issues. She is also incredibly compact and bushy right now. In about a week or so after stretching I'm gonna have to defoliate and open her up some most likely. Day 47 she is looking better yet! She is really showing signs of perking up fully and bouncing back! She definitely took a beating with these water issues but I think I got her figured out now. We increased airflow around her pot even more so she can dry out better. I suspect the bottom of her pot was staying too wet for daily watering causing issues. Now she seems to be drying out quicker and looking much happier. Day 48 we removed some dead and dying leaves that she had on her lowers. Looking nice and perky today and starting to stretch out a lot more.
Processing
Likes
3
Share
Likes
3
Share
@Mismatas
Follow
APROXIMADAMENTE CUARTA SEMANA EMPEZAMOS POR PRIMERA VEZ NUESTRO LST Y UNA LIGERA PODA DE BAJOS. SEGUIMOS CON EL CABLE DE CALOR PUESTO Y TAMBIÉN AÑADIMOS UN CALEFACTOR PARA MINIMIZAR LAS BAJAS TEMPERATURAS
Likes
8
Share
@DoMoNe
Follow
Following RQS auto guide : https://www.royalqueenseeds.com/blog-how-to-grow-autoflowering-cannabis-n83 WEEK 6: THINGS START TO SMELL #36 19.4. - #42 25.4. #36 19.4. -Just Remotemonitoring #37 20.4. -Defoliated a lot, about 40-50 leafes/lower branches that wont make it to the surface anyway. -Raised the lamps 10cm #38 21.4. -Watered with nutes 1,5liters/plant #39 22.4. -Attached net and startd ScrOG:ing #40 23.4. -Just Remotemonitoring #41 24.4. -Watered 1,5/plant with nutes, so far 12liters in last 6days, so a ½liter/day/plant. -ScrOG adjustments #42 25.4. -Just Remotemonitoring
Likes
98
Share
Well growmies ive been looking forward to the bubblegum for sometime now , as the last time i grew it was like 09 and there both keeper that's for sure 👈 couldn't of asked for better Genetics 😉 The smell coming from both plants during the entire grow was just dreamy 👈.... Amazing Plants 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34