This is week one of flower. It’s been one week since switching to a 12/12 light cycle and I’m seeing signs of flowering and a slight smell .

Week 2: Stretching

We’re approaching the finish line — the top buds are already nearly perfect. I’m just giving the lower ones a few more days before putting her into a 48-hour dark phase.

Trichomes are getting cloudy. Next week is harvest time 🙌🏼

Hello my friends grower 👨‍🌾👩‍🌾🌲 This first remote grow 🎥 week look nice, girl look nice grow up. With 1l/bottles/plant around 8 days, My friend came this Saturday to remplace the bottles. Water + rhizo PH@6 And took the weekly video 📹 See you next week for the second remote grow week. Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Also to @marshydrococo2 , @News_SweetSeeds for sponsoring 💕💕. Mars Hydro TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light Gorilla Girl F1 fast version https://sweetseeds.es/en/photoperiod-dependent-seeds/3065-gorilla-girl-f1-fast-version.html See you next week my friends Have a good week end 😁💕

Day-1 put 41 blue dream seeds which i beleive are non gendered autos into pellets to grow as backups, I am primarily trying to grow a white widow autoflower from crop seed kings and 3 of a peyote strain unspecified gender and flowering style. Day-2 humidity and temperature are sitting at 98up to +100 and 23-31 degress celsius will be leaving top more open after about 6 today to lower humidity just wanted it cranked up for a day or so Day-3 things are looking good many seeds are starting to show taproots between a quarter inch and five eights of an inch popping through the bottom of the seeds. Day-4

Día 8 (28/10) Subo a DLI 20 Spray solo H2O RO en el top del sustrato Retiro la cúpula de humedad, porque una de las CBD Auto 20:1 tenia el tallo ligeramente doblado por falta de resistencia Sin la cúpula y con el ventilador a la potencia mínima (1/10), van a tener una suave brisa que va a hacer que se fortalezca el tallo! Día 9 (29/10) Las plantas se han estirado mucho y se tambalean un poco Creo que deberían haber tenido un DLI más alto desde el principio! Día 10 (30/10) CBD Auto 20:1 y LSD-25 Auto se encuentran "tumbadas" porque el tallo se ha estirado mucho! Hago un soporte casero con una brocheta de madera + alambre + clip de enrejado para mantener los tallos verticales! Spray solo H2O RO en el top del sustrato Día 11 (31/10) Las plántulas se muestran verticales y felices! Una de las CBD Auto 20:1 está mostrando un desarrollo muy rápido! Spray solo H2O RO en el top del sustrato Día 12 (01/11) Spray solo H2O RO en el top del sustrato Día 13 (02/11) Las plántulas se están estirando mucho! Creo que las falta DLI Subo el DLI a 30 Spray solo H2O RO en el top del sustrato Día 14 (03/11) Introduzco la 1ª BioTab a 5 cm de profundidad, lado derecho 1er Riego! 750 ml de H2O RO + ORGATREX 5 ml/L + BACTREX 1 g/L 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/

Plants continued to grow well some plants show signs of nutrient deficiencies, trying to address it without burning all the other plants. But besides that all looks good and we ready to flip to flower. 12/12 cycle to start. Clones looking strong and ready to be replanted as mothers for the next batch of clones / SOG

The plants are growing and getting fatter and thicker by the day. I can see shoots of red pistins on the flowers and they are very sticky. The smell starts to be noticeable but I have a carbon filter so I'm sorted for now I do consider to bring ac unit

📆 Week 15, 30 April - 6 May 2024 30 April - Turned light power to 75%. 1 May - Did a significant defoliation. 2-6 May - Observed and let the plant grow. 📑 I was debating on keeping the lights at 100%, or defoliating the plant. Defoliating won this time. There just wasnt enough light penetration getting to the lower buds (half the plant) to mature them for maximum growth and quality yield. So leaving the lights that bright did not achieve my expectations. It is a tricky situation when you start taking leaves away from a plant in flower, but when shadows are blocking bud developement you have to balance your grow and open it up. My method is to start with the lowest leaves and work your way up, use common sense, discard yellowing and damaged ones first, leaving the healthy green leaf on the plant. Then strategically remove the few that shadow the buds you want more focus on. This will help ensure the plant continues processing energy while avoiding possible shock by removing too much leaf. 🍶 30 April changed nutrient solution 🍽️ 30 April updated feeding schedule 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.2 at 72 degree F 🔆 Light power at 75%, DLI 45-50 canopy coverage at 12hrs 😤 Using General Hydroponics, HGC728040, Dual Diaphragm Air Pump, 320 GPH That is it for this week. Thanks for the look, read and stopping by.

Hey Friends, end of week 5 from seed - Installed New Grow Tent @CoolGrows 36x36x72 - After Adjusting the light, I decreased the wattage and plant #2 is looking much healthier and is growing in height :) - Still can't detect Plant #2 gender - Will flip to Flower next week, 12 hrs of light 12 hrs of darkness - I am glad I transplanted to a 5 gallon pot, each day the leaves are looking better. Hopefully its a female, see you guys next week!

This one was a huge surprise because up to this point i had thought it was a completely different plant, blueberry cupcake. one of two seedlings had died and i didn’t have them properly marked. its growing great but clearly has a long way to go before finishing. smells like pine, funk, and a hint of citrus

❤️🌱 We decided to document the flowering cycle of this monster for posterity.. she's been in veg for about 16 weeks, it shouldn't have taken this long but we dropped the table on her late in development so she needed a few weeks to repair..today is her very first day of flower... we're currently using x2 top end CMH 3100ks but placed an order last week for the FC-E6500 by MarsHydro to replace both 🤘🐱..that light and this plant should turn into something magical.. my hubby gets most the credit for this beast but we're a team so I'll share lmao 😸.. the scrog table is 3.5x3.5, homemade with 1/2 PVC, screws and twine..it's a tight squeeze in the 4x4 but looks great to me... thanks for dropping by and happy harvests everyone!! ❤️💡🌱

Para ser la primera vez que cultivo no puedo quejarme, pero si alguien me pudiese ayudar

Plants started growing very fast. 20 hours light a day and 140 ml water for 2 plants so 35 ml each plant. (70ml -35ml one plant- morning, and 70ml -35ml one plant evening). From Monday I will start giving 200ml water 100ml in the morning and then the rest in the evening. Ventilation almost 24 hours, They are getting bushy and the color looks healthy green. I am excited. Purple Punch ( the right one) does not have the smell but the Gelato Cookie D'ohpe started smelling from the 3rd week, it is not strong, it is smooth, enjoyable. I still use trigger spray but I stopped triggering directly on the plant to avoid any fungee or toxicity, I just keep the soil moist. I surrounded them with kitchen foil around the lamp to have a more effective light. It reflects the light and the light goes everywhere. This step has been done because I have only the 60w LED each plant so I try to provide the maximum strength this way, and by keeping close distance also. The lamp is not hot so it ain't gonna burn the plant I had checked it before. I just purchased today a 600w LED because these plants look so good so I wanna provide the best circumstances for them. 4th-week 4th day I a just waiting for my delivery my 600 W grow LED light will come. From today I started watering with 50ml each plant 2 times a day so all together 200ml a day. Plus I always use trigger spray for the soil to be kept wet. They are looking better and better. Nice color and bushy appearance. Wonderful. I realized some holes on the Gelato Cookie D'ohpe's leaf but there is no insect I was checking. I do not really know the reason for that. Tonight I will set up the new 600 W LED so I am changing the current 120W. Big Step forward! It is not that easy that I thought, the lamp is great but the temperature raised up a lot, so needed to buy a fan also and the humidity went down. It is not easy to find the proper solution to be acceptable, good temperature and humidity at the same time. So I decided to program a 6/2 schedule, so 6 hours light on and the fan always with 15 min more, and 2 hours off so I do provide 18 hours light and 6 hours darkness but it is divided. The plants can rest after every six hours and use the energy they received. Last day of the 4th week, LST has been done with the Gelato Cookie D'ohpe, both are growing rapidly, let's see what the 5th week brings! End of he week Gelato Cookie D'ohpe is 25cm, Purple Punch is 20cm😇

Con 22 dias, pasados 7 de la última poda de hojas y 22 del cambio de fotoperiodo me decidí por hacerles una nueva poda, esta algo más severa . Yemas, hojas y chupópteros de bajos. A partir de entonces solo se irán quitando muy de vez en cuando alguna hoja o algun brote o yema que pueda salir por ahí que no me guste, muy poca cosa. Me deshice de la malla, harto me tenia. La quité para la poda y luego me hizo mucha pereza volver ponerla. Prefiero menos cantidad. Esta semana explosión de tricomas

Day 1 drying

Been two weeks since last update. Reoccurring back strain has made it challenging keep up with grow and diary. Just the basics. That said, I switched nutrient line from Fox Farm to GHE's trio. So much simpler that FF. Let's see how results are giving transition took place at bucket change. Figure one maybe two more changes before harvest.