The Grow Awards 2026 🏆
Likes
Comments
Share
@KhaVigga
Follow
i went to work like 2-3 days not coming home and she is nearly dry out to dead but luckily i came back in time and fix it.
Likes
83
Share
@yan420
Follow
FERMAKOR BARREL MIX – BASE IN USE (Testing on the Fantasy Feast girl we pulled out of another diary https://growdiaries.com/diaries/274722-grow-journal-by-yan402 ) (FERMAKOR BASE SYSTEM KOH VERSION diary https://growdiaries.com/diaries/278391-grow-journal-by-yan402) (Urea & Micros on the way — first week running without them) 🍶💧🍶💧🍶💧🍶💧🍶 💧 30 L Barrel – Current Working Mix 🍶💧🍶💧🍶💧🍶💧🍶 Step 1 – Calcium Nitrate (Part A) 7 L warm water (~35–40 °C) → added 45 g Calcinit, stirred until fully clear. That’s the calcium + nitrogen backbone for the feed. Step 2 – FERMAKOR PK Base (Part B) 15 L water in the main barrel → added 30 ml FERMAKOR PK Concentrate, mixed well. This forms the main P + K part of the formula. Step 3 – Combine Solutions Slowly poured the Calcinit mix into the barrel while stirring — no reaction, still crystal clear. That confirms the mix is stable and precipitation-free. 🌿 Step 4 – FPJ / FFJ Batch Added 30 ml homemade FPJ (fish + veg batch) ≈ 1 ml/L. Color shifted to a light-amber tone — looks alive and active. 🍋 Step 5 – Citric Acid Balance Added 1 tsp citric acid after everything was blended to fine-tune pH and help chelate micros later on. 📦 Step 6 – Top Up & Check Filled to the 30 L mark with plain water → pH tested with drops, showing yellow-green — roughly 5.8 – 6.0 range. Nice clean look, stable smell, no residue. 💧 Current Base Ingredients (Active Mix) Warm Water ≈ 22 L total Calcinit 45 g → N + Ca foundation FERMAKOR PK Base 30 ml → P + K support Citric Acid 1 tsp → Chelation + pH balance FPJ / Fish Emulsion 30 ml → Organic enzyme booster Result: clean amber mix, mild and balanced. I’ll let this version run for a week before adding anything. 👀👀👀👀👀👀 Observations and changes 👀👀👀👀👀👀 27.10.25 VW27 noticed some min burnt tips so I decreased Calcium Nitrate 45 to → 40g, decided to add two more elements micros and Epsom salts just to make sure they got everything, Fetrilon Combi 1 (Micros): 0.5 g, Epsom salts: 8 g 28.10.25 VW27 she seems devoid of any deficiencies, seems ready for the flip to 12/12 02.11.25 VW27 girl is looking good so I decided to stop making daily videos and do a standard once a week update. 09.11.25 aVW28 7 days since flip,stretch in full swing, first pistils showing, leaf color deep and healthy. Slight tip burn early week → gone after pH stabilized. Feed stayed clear, no residue, roots clean and sweet-smelling, did what I hope is a last cleanup and pruning🎥 10.11.25 VW29 added Phosphoric acid pH down to the schedule for flowering stage. 14.11.25 FW1 FERMAKOR PK Micros 40 → 50 ml 23.11.25 FW2 got some burnt tips, observe and act accordingly in case it worsens, diluted by 25% for this week. 05.12.25 FW3 about 2 weeks ago Calcium Nitrate 35 g → 25 g, FERMAKOR PK Micros 50 ml → 60 ml 12.12.25 FW4 Calcium Nitrate 25 g → 20 g, FERMAKOR PK Micros 60 ml → 80ml 16.12.25 FW4 Calcium Nitrate 20 g → 17 g, FERMAKOR PK Micros 80 ml → 110 ml 20.12.25 Calcium Nitrate 17 g → 15 g 26.12.25 Ffj fpj 30 →0ml 05.01.26 last feed LST and trimming, harvest is end of the week 09.01.26 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Fed about 5l a day of #1 and on the weekends I do a pure FERMAKOR PK flush 2l runoff (*RUNOFF reused for tomato plants) 💧💧💧💧💧💧💧💧💧 🌱 Nutrients in 30 L #1 – FERMAKOR (progression kept) 💧💧💧💧💧💧💧💧💧 Calcium Nitrate (Calcinit / Nitcal): 45 → 40 g → 35 g → 25 g → 20 g → 17 g → 15 g = 1.50 g/L → 1.33 g/L → 1.17 g/L → 0.83 g/L → 0.67 g/L → 0.57 g/L → 0.50 g/L = 207 ppm N / 253 ppm Ca → 184 / 225 → 161 / 197 → 115 / 141 → 92 / 112 → 78 / 96 → 69 / 84 PK Concentrate (FERMAKOR Base): 30 → 40 ml → 50 ml → 60 ml → 80 ml → 110 ml = 1.00 → 1.33 ml/L → 1.67 ml/L → 2.00 ml/L → 2.67 ml/L → 3.67 ml/L → balanced 1:1 P:K + light micros (from extract) Home-made FFJ/FPJ (Fish + Veg): 30 ml → 0 ml = 1.00 ml/L → 0.00 ml/L Epsom Salt (MgSO₄·7H₂O): 8 g = 0.27 g/L → ~26 ppm Mg + ~35 ppm S Fetrilon Combi 1 (Micros): 0.5 g = 0.017 g/L → Fe 0.7 ppm · Mn 0.7 ppm · Zn 0.3 ppm · Cu 0.3 ppm · B 0.1 ppm · Mo 0.02 ppm Phosphoric Acid (pH down) + Citric Acid (chelation): as needed → First set pH with phosphoric acid, then add a little citric only if you want extra chelation Target pH: 5.8 – 6.0 (drop test yellow-green) 📦 TOTAL (corrected): Liquids (PK + FFJ/FPJ): 60 → 70 → 80 → 90 → 110 → 140 → 110 ml per 30 L = 2.00 → 2.33 → 2.67 → 3.00 → 3.67 → 4.67 → 3.67 ml/L Solids (CaNO₃ + Epsom + Fetrilon): 53.5 → 48.5 → 43.5 → 33.5 → 28.5 → 25.5 → 23.5 g per 30 L = 1.78 → 1.62 → 1.45 → 1.12 → 0.95 → 0.85 → 0.78 g/L YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31
Likes
33
Share
So this was quite the productive week..! They grew enough after the topping for em to bend over. First step to ScrOG has been done and I'm quite happy with the results 💚 Next step is the screen of course! Then let them full it and switch em Just a reminder.. I'm growin 4 plants in a 120*120 so a little patience would be required if you, like myself, would like to fill that space up ❤️💛💚 One day I'll fill it with just one plant 😆😆
Likes
5
Share
@Rko41
Follow
10cm de stretch en 1semaine et c’est pas fini vu la génétique et que c’est seulement le début de Flo
Likes
2
Share
@QoverQ
Follow
So we came to the end guys, these ladies gonna stay in the dark for 36 hours now and get cut on saturday Think i made some mistakes with Topping on earlier stage with Cookies and Cream, and also some mistakes with bubba kush on flower stage, its my first grow and i can say it was a nice experience with them strains 😌 Im gonna share the dry weight and more detailed informations about the strains and the nutes ive used as long as its ready 👌
Likes
7
Share
I'm 90% sure this one is in her finishing week here. More amber trichromes are coming in daily. I don't wanna push her too far like last time because this strain turned pure amber and kinda lost some crystaly luster during the curing process. My light timer, grow tent, and light upgrades really made a big difference in bud development compared to my last run with Runtz basically leading to bigger more frostier buds. I'm dropping temps lower at night. I give it a couple liters a day to keep the top soil moist. Flushed water comes out 6.8 ish. My CO2 exhale bag was the biggest flop as it was expired and did not activate. I plan on 48 hours darkness before harvest starting today: the day of the eclipse. With the new moon we have a high pressure system that is peaking at night around 1028 dB. Water should be pushed up into the plant from roots. Coupled with lights out....all theoretical witch craft. I have a small 2x2 dark tent pictured which needs to have AC bring in cold fresh air from outside. If no fresh air added the tent gets humid and stagnant after a while. The darkness period is bringing out that strong and sweet 'medicinal' smell. If you ever tried weed labeled medicinal youd have an idea of what I mean. I guess thats the orange bud/chemo lineage traits. Before lights off the smell was more towards yeast fermentation smell and not soo sweet.
Likes
2
Share
Getting some ambers on the buds now, so not too much longer. The buds just keep getting tighter and more dense so I'm not complaining.
Likes
2
Share
Likes
33
Share
good morning everyone, weed masters and beginners ....we show you the photos of the plants a few days before harvest! we tried to gather everything together and we got a good result 🤗🤗🤗
Likes
13
Share
Likes
1
Share
Week 6 of flowering 10/23/24 Changed nutrients to fit week 6 Buds are getting even bigger and thicker. Defoliated a little. Noticed a PH of 4.8 in runoff, same as the late stage of flower in my previous grow. After lowering feed EC, CalMag on max strength, flushing with 0.8ec nutes for 3 days in a row, nothing changed and PH stayed the same. Read in a forum thread about constant low PH in the rootzone when growing in coco. Got great info about CEC, water, nutrients and little chemistry from a detailed explanation. (https://www.icmag.com/threads/recurring-problem-with-low-ph-in-coco.338385/page-2#post-10843765) Flushed plants with tap water + calmag, PH 6.5. Used 120L total for 4 plants in 2 days. 1st day: flushed after lights on, did not water until 2 hours before lights off and flushed again. Runoff PH went up a little, but not to the correct range. 2nd day: flushed after lights on and checked runoff EC + PH, of each plant. Fortunately, PH got corrected to 5.8, and I returned to automatic watering 4 times a day (with 10%-20% runoff). Thoughts: In the last grow, I thought I had a problem because of salts buildup in the media with constantly low PH in late flower. I didn't fully correct the problem till chop day. Same problem here in the same stage of flower without the salt buildup. After reading every forum I could find about the problem, I understood that my bloom nutes were the main problem because of their chemical composition. The coco ability to exchange ions lead to the low PH in the rootzone. It got worse quickly because I did not use any tap water with the feedings, so the PH could swing easily and drastically without resistance. After I looked online for the T.A. feeding chart, I saw they used TriPart Grow till week 7 of flower, the Nitrogen type they are using will up the PH. CocoForCannabis chart that I'm using, has not enough nitrogen to combat the bloom nutes PH down effect in flower. It gets even worse with RO water because there are no minerals that can resist PH down. Now I'm using 30% tap water with rest RO water, T.A. TriPart feeding chart with calmag and silica. Hopefully I have corrected the problem for the rest of the grow. It wasn't easy, because there were lots of variables that worsened the problem quickly. Now I'm checking runoff PH and EC daily. Update on next week :)
Likes
16
Share
@MrGoonai
Follow
She finally stopped her heightgrowth. Happy with that, because i don't have more space to hang the growlight any higher. I decided to give her more nutrients this week. She also did trink more water (4.2L in this week), although she was only exposed to the growlight and had no direct sun anymore. She smells incredibly sweet. I quite enjoy it, and sniff here every day 😅 Really curious how long it will take until i'm going to harvest her. I decided to wait until she has 60 to 80% brown trichomes. One of her leafes on the bottom still isn't looking too good and is more yellow, so i probably going to cut it in the next few days.
Likes
22
Share
@valiotoro
Follow
Sooooo impressed with the size & quality of the buds😳 Super dense & sticky✂️ The smell is sweet fruity mix berries🤤🍓
Likes
14
Share
This week there was a substantial amount of rain and it was very muggy and humid...We are about to have a potential 2-week heatwave of over 90 degrees so I'm expecting some retarded growth since growth slows down in intense heat. But I must also say that I am curious to see what the unknown is because it is outperforming the rest of the plants and it was one of the smaller ones from the beginning..🤷 we shall see!!
Likes
16
Share
End of week 11 (day 77) in bloom and the end is near. I already cut one plant and i will cut another in few days. The 2 Panama plants are starting to getting red! I monitor the trichomes with microscope and i am waiting patiently! Buds are getting thicker and trichomes milky!!
Likes
50
Share
Last week of flower amd flushed for the week. Buds are all cloudy and trady to go. Put them in darkness and will leave them there for five days. I have another plant drying and trying to stagger trimming. First plant dryed for 14 days and was about right. Trimmed it up and it is now and curing. Been in the jar for two days and humidity is 57%, good for me. Waiting for the cure now. It was kinda nice to do a stagged harvest so all the trimming did not have to be done at once. I think I will try to do it this way again. The final weight for the first plant was 102.78. The quality of the buds is the best so far. Not sure if that is attributed to luck, strain or growing is getting better. Time will tell. Next post the harvest. Cheers
Likes
29
Share
@Mattuston
Follow
Good morning all. Rather nice week with a correct stretch for each lady, except the Jamaican which, as usual, continues its slow growth in bonsai mode. A big thank you to PEV SEEDS who, graciously, agreed to send me a new seed so that I could try the adventure again with the Jamaican Lambsbread. (I will certainly have special attention towards her ...) So I decided to remove it from the flowering box to try to re-vegetation to try to save it and give it a new life as a mother .;) The wedding Cake clearly displays an Indica predominance, solid, bushy but with a reduced internodal distance. So I had to raise the pot by about thirty cm in order to obtain a homogeneous canopy and to be able to train it a little. Same principle for Thay Chocolate 2019 (heightened by 15cm) which, despite the long and thin very sativa leaves, seems to have started flowering more calmly. I took advantage of the departure of the Jamaican to also remove the 2 main branches. Sideral and Golden Goat, nothing to say, good growth. Ditto for Congo which continues to show us its superb genetics. I start to introduce a tear of green sensation but I limit the nitrogen because none is deficient. The Mars Hydro TS1000 works quite well but I think that for 1m2 it would be necessary to have 2. The flowering started slowly and the 150W Led are in my opinion the cause of this slowness. 300W would have been ideal. We will see later to fix this problem. The news of the week: The cold is here! big drop in temperature here for two days. Monday I install a small radiator to guarantee a warm and cozy cocoon for the girls. P.S. the water drops visible in the photos are remnants of the Vita Race foliar treatment applied this morning. There, I think I've done everything. Have a good week.
Likes
1
Share
May 27th-29th Trellis net is getting full and plants looked good, could’ve flipped to 12/12 but my smart self completely forgot about that flowering stretch so I vegged them till I saw a “good height” lmao I know but it’s my first grow leave me alone lol