Hi all! So I started adding PK 13/14 this week , only 0.5ml/lt, I haven't notice such crazy growth or more sugary flowers so far, anyway they look nice. One of them is showing some light brown spots which I think it's a K overfeeding due to the 13/14, what do you think? I'm watering every 2 days but humidity levels went higher so I need to use a de-humidifier and I'm obtaining 7lt water every 2 days from the tank. They look very well, I'm waiting now for my magnifier to arrive so I can check em cuz I think 2 of them are almost ready to cut. I think I gonna start adding only ph'ed water from now on, soil has bat guano as well so I think they will have enough nutrients to keep growing so far. Thanks a lot everyone ,this community is amazing, cyA next week!

everything seems to be fine, 10 days from switching, should start flowering every day I hope :) Stay tuned and thanks for visiting :)

Week 10: This will be the final update before Harvest: I will update post harvest after the dry and weigh. Day 64-66: Decided I would continue feeding them until I harvest since they could go 7 days longer. Albeit with a half dose of Calmg and Boost(micro). All White Cracks seem to be doing good. I realized a few days ago the outer plants underneath the blurple LEDs seemed to be showing slight signs of light stress(the leaves were bending away from the light instead of toward it). I lowered the Blurples a few days earlier so I raised them back up. These are some FROSTY plants... Day 67-70: Going good, plants under the blurples responded postively to raising the lights. Seems I was wrong last week about these smelling stronger than the 4AM, it's actually the other way around lmao. But these are still some great smelling plants! Can't wait to dry and weigh that thicc double bud and main cola from WC#1! Hope it's not too airy, they look like pretty dense buds! Really bummed that I have to harvest this weekend, I would have liked to let #2 and #3 go for another week, but it's all good! Next time! Still this will probably the dankest shit I've smoked in a very long time 😂😎 #1 is probably the most mature at this point with about 90% cloudy and a 5-10% amber. #2 and #3 are the same with about 70-80% cloudy and a few amber. This has been an awesome learning experience and I'm already thinking about ways to improve my next grow! These White Cracks have been quite resistant to my newbiness! Awesome plants to grow! Much easier to hanlde than the 4AM!

Day 14 Today marks two weeks since planting. The plant is showing steady development, with more defined leaves and stronger color compared to the first days. The overall structure looks healthy and balanced. The soil remains evenly moist, and the environment seems stable. No major issues observed so far. Excited to see how the next stage of growth will unfold. 💦💦💦💦Watering💦💦💦💦💦 Week 2 27.09.2025 – Watering 0 ml 28.09.2025 – Watering 0 ml 29.09.2025 – Watering 0 ml 30.09.2025 – Watering 500 ml Ph 5.6 01.10.2025 – Watering 0 ml 02.10.2025 – Watering 0 ml 03.10.2025 – Watering 0 ml

Another good week generally speaking. The girls are drinking a lot but nothing crazy. Things are wrapping up here in this tent shortly. This girl is almost done. She's finishing up over this week and will see how she goes. Some smell from her but not that fat. Dimmed to 80% Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/

Day 65 past nutrition problems I believe have slowed growth. unfortunately on a plant I think I have problems with the compaction of the soil which has caused too much irrigation. the plant does not eat and a little slower than the others. now after 4 days to dry i will give only datpo water which seems to burn for nutrients, i believe brought about by the fact that they are deposited in the soil. all in all they continue to grow and hope for the best! 💚🌱

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Auto Northern Dragon Fuel grew really well in a small potter of a gallon and a half. I unfortunately had too much nitrogen in her system during flowering. This effeced my yield some. The flower that is there has a great cherry wood diesel smell. It was also very frosty and looks potent. I should get several ounces for sure once it is processed. Thank you again Super Sativa Seed Club, and Medic Grow. 🤜🏻🤛🏻🌱❄️ Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

So forgot to add last week I took out the scrog net as I personally think the plants were to far into flowering now to be trying to tie them down! This week I’ve been trying to check trichomes!! Also I’ve added canna pk13/14 nutrients! As I think there getting closer to harvest time! I’m planning on using this 13:14 for two weeks feeding?? Then flush for 7-10 days with just normal soft tap water ph’d down to 5.8!!?? Also ordered a microscope just waiting on arrival! So I need to keep checking these trichomes until turning a little milky?? But overall still happy with my first grow so far! Notice leaves are turning yellow do I trim them? Or let them die naturally? Any help still needed cheers

Ehi ragazzi come va? All inizio quando hanno cambiato grow diaries ero dubbioso, ma ora che si possono caricare tutte le foto assieme è tutta un altra storia! Allora cosa posso dire, la ragazza questa settimana si è sviluppato in modo impressionante, si vede che il nuovo prodotto di plagron sta facendo effetto! Addirittura le cime hanno più fiori delle altre sorelle fertilizzante con Advanced, i fiori sono davvero tanti e molto densi, penso che dovrò defogliare un po per scongiurare il rischio di muffe, ma per il resto tutto procede secondo i piani, la pianta è bella grande di un bel colore verde intenso e senza carenze per ora.. Grazie plagron e spero di aggiudicarmi un buon posto nella sfida, anche se c'è gente molto più capace di me! Allora buon 420 e alla prossima settimana! Grazie sempre a Mars hydro per l equipaggiamento fenomenale che mi permette di avere la migliore erba medica a casa mia!! 💪😸😺🤞🍀🌱🌿🌲💐🧑‍🌾😎💨

The Future #1 strain took to germination right away, was very flexible, and worked very good for SCROG. It produced heavy buds that are beautiful. Teh strain started very strong and grew excellent. The flowers was super dense, very crystally and sticky. It will be very interesting to see how they smoke. I had some pH issues with my water supply which impacted the grow and this strain seemed to be more light sensitive compared to another Anesia strain right next to it. Wet bud weight is prior to trimming. The buds off of this plant were HUGE!!!! Wet weight - 58.8 oz prior to trim; 14 colas; Terps: White - 70%, Amber - 30% After 3 days of drying, took them down to trim for my jars. Dry weights into jars: Future #1: 9.06oz I did pull them after a day to dry rack them for 12 hours due to a little bit higher moisture content then I would have liked (+70%rH). Re-jarred on 6/1/23 and now holding steady at around 60% rH. Cure Check In: 6/10 - 6/12/23: rH ~ 63 - 66%. Daily air exposure & fanning. Very smelly. Looking good - another couple weeks and will be ready.

Very strong genetics on this one, I would definitely grow it again for those dense buds fully covered in trichomes. Thanks to the FastBuds team for the seeds!

Stretching a lot at the moment, strong smell for only 2 weeks in flower. Pistils are now visible. As buds start to form. I moved the centre plant out as it was shorter than the others so looks a little more roomy now.

Very easy to grow, this is my second Gorilla Zkittlez and both grew without problems

Ciao a tutti! Settimana spettacolare! I fiori sono veramente raddoppiati, non ho mai avuto tutto questo profumo che mi invade letteralmente tutta casa e oltre, veramente uno spettacolo, dolcissimo, fruttato! 😂🤣 non sono mai riuscito ad ottenere tutti questi tricomi e terpeni vari, non vedo l'ora di raccogliere! Ancora una settimana / 10 giorni di acqua fertilizzata poi penserò al flush! 20 giorni scarsi e ci siamo 🤩🤩🤩🍀🍀🍀😎😎😎💪🏼💪🏼💪🏼

Week 6 day 1 video Week 6 day 4 video I’m still pushing very hard with carbs every watering, humic acid, soluble n, soluble pk, microbial mass, b+, fishshit. Already tried testers for lowers. Very potent hits harder than a pen. Feels like 30-40% baked for 1-3h per j, different phenos. Not harsh just testers dried for 0:01:15, checked seeds and developing for 2-3 weeks

Día 29 (10/02) Riego con 400 ml H2O RO Detecto una ligera deficiencia de Magnesio. Aplicación foliar de sales de Epsom a 2 g/L Día 30 (11/02) Riego con 400 ml H2O RO Día 31 (12/02) Riego con 400 ml H2O RO Día 32 (13/02) Riego con 500 ml H2O RO Está teniendo un stretch espectacular! Día 33 (14/02) Riego con 500 ml H2O RO Día 34 (15/02) Riego con 500 ml H2O RO Detecto unas ligeras manchas en las hojas de abanico más antiguas que parecen carencia de CalMag Voy a regar durante unos días con mezcla de H2O RO + H2O del grifo (Tap Water) con una resultante EC 0,45 Día 35 (16/02) Riego con 500 ml H2O EC 0,45 Khalifa Genetics - https://khalifagenetics.com/product/lemon-blanco-v3/ 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp

Finally moved these two up into 7 gallon fabric pots. I didn’t want to let them go any longer in those little pots! Especially with the kind of year I’ve been having. Anyways, on that note, here is a video of those 3 photoperiods; one of each, an A-Train, an Alien Rock Candy, and Ackbar OG.