Likes
Comments
Share
2/7: Did a thorough feeding today, and also foliar fed with Microlife Maximum Blooms. Added humic acid. 2/12: Fed today..no time for anything else..
Likes
6
Share
@Pyrrus_
Follow
Tag 15 meine lieben die Ladys entwickeln sich super bleibt dran um nichts zu verpassen 💚
Likes
19
Share
She is going to be amazing when full sized. I had my quarrels with the lady but it's been rewarding waiting with patients. That is like we should do with all lady's. ;)
Processing
Likes
1
Share
Bonjour à tous, ces derniers jours ce sont bien passé pour mes petit bébés elles grandissent doucement mais sûrement.C’est la première fois que je travail avec cette gamme de produits (je vous est mis des photos des produits 😉) pour l’instant j’en suis satisfait après, il faut voir le résultat final ce qui est moins facile 😂. Mes petit bébés commence leurs 5ème semaine (je me suis trompé d’une semaine 😕 désolé 😉) trop pressé!!! 😂 de mettre de nouvelles photos 😜. Je vous dis à là semaine prochaine vivement 😉 bonne journée à tous. Je vous remercie 😉.
Processing
Likes
12
Share
@Tazard
Follow
We have a very full tent! Taz’s jungle 😂🤣. Check out the purple purple photos from day 20!!! Everyone looks absolutely beautiful I’m hoping that the white critical will be ready in 4-5 weeks. She’s going to have some fat colas!
Likes
8
Share
@DoMoNe
Follow
Following RQS auto guide : https://www.royalqueenseeds.com/blog-how-to-grow-autoflowering-cannabis-n83 WEEK 2: LATE SEEDLING STAGE #8 22.3. - #14 28.3. #8 22.3. - Canna PH- grow (and bloom) arrived today, mixed 6ml to 3liters and poured around the pots (hoping to get hum. up also) will see what it does and if the PH starts going down from the 7+ i can start adding smaller amounts. -Moved around the LEDlights (those have 'bout 2000LUX at plant level) so they are more along the tent walls. -Moved temp meter from lamp to plant levet (have now confirmed the lamps wont heat up too much under current air flow so its safe to stop monitoring heat source temps. -Removed the "glass" from 3in1 meter and the tape from the front, tested the luxes, still at few hundred, so i would guess the LUX meter in that cheap meter is BS!. Now the PH is way more visible in the camera when there is no screen reflection etc. Added pics of the luxes from android app, will receive the "real"meter possbl this week. -When i had tent door open and did the stuff mentioned above the temp dropped to about 13degrees, but now we are already back up at 23'c at plant level, so seems stat the current exh-fan rotation is good. -Plants emself have taken some sort of an growth spur 'cause just few days ago they seemed like they are not growing at all, and ow i can really see the difference and they are making next set of leafes, might be that the temps risen so they enjoy em self now way more - forgot to take new pics from the plants emself so will juts update pics from cam for now , at least there's been some change again. -Will try to remember take proper pics of the plants next time i visit the tent physically -Should remember to buy the "LST-wire" for training, would be good time to buy some eastern decorations fluffy wires. #9 23.3. -Noticed that the timelapse camera is getting thrown around as well as one LEDpanel, so went and tied em up to tent posts. -Added 1,5liters of water that had 6ml of PH- canna in it, and poured in to "middle corner" of every pot. -Tent was way more warm and moist inside then ever before, which is a good thing, im sure after the latest added water im getting there. -Ordered a RAM humidifier. And some nutes pack from bio-grow. -Updated "week2 timelapse" (Check 1st week for its timelapse) -Note to self: Take those damn "camera quality" plant pictures, you are supposed to...- #10 24.3. -Started small form of LST -Guess who forgot to take the closeup pictures... again... Well better luck next time :D -Added 5liter RAM humidifier, at lowest possible setting, so that the water would last longest -Added 1,5liters of water with BioBizz nutes that came today in mail, Alg-A-Mic, Root-Juice and Top-Max. -Added ScrOG, but obviously its now just tested that it fits and its hanging at the tent side. -Had to move the Fast Eddy a bit and make a "stand" for the humidifier. -Moved the other LED (2300lux) a bit further up, will have more effect when plants grow, and those can be had as a xtra lights. -Moved some wires around their sockets to get better fit for all connectors. -Adjusted the camera directions -Turned both fans to level 1 of 2 -exhaust fan still at about 50% timer on/off, that must been what caused the "wobbly"pictures in timelapse as the tent gained more vacuum inside which must have drawn in the walls a bit. #11 25.3. -Not sure if i did anything #12 26.3. -Water run out from humidifier -Added a pic of the day -Luxmeter arrived, didn't had time to install it yet, but tested and found working. #13 27.3. -Added Hydrometer -Filled humidifier -Poured 1liter of water with nutes -Added/moved LST's -Finally remembered to take the close up pics of the plants! wohoo. -After following the hums i think i might add exhaust flow as its also warmer outside so the tent can now take it #14 28.3. -Last day of #2 week -Did nothing, just watched em grow. -Water run out of hum. hum went from 65% to 45%
Likes
3
Share
What a week! the weather has not been very gracious to us. It has been pretty hot all day and humid at night. The majority of the day has the perfect setting but when the sun is at its peak it definitely puts a tool on the girlies. :'( We got a bigger fan to circulate air more but well have to see how that goes... Hoping for rain and some extra clouds soon!
Likes
Comments
Share
Really starting to frost up and beautiful smells ranging from sweet earth to danky dank. Struggling 2 keep humidity down and had 2 cut a small amount of mold from Finnish frost:( added trays of moisture crystals 2 combat but need a dehumidifier.
Likes
21
Share
@OGTrauma
Follow
Ok brothers and sisters i had a minor drawback regarding to external weather so conditions like ventilation and how much heat generates the lights itself were on check on this week, i peaked with 28°c and 30% humidity, so that explain also the increased ddistance between the lights and the plants , as temperatures are on the rise. Additional height control through some lst and changing positions at ones possibly where the stem and branches lignificated and the support plays no role anymore in order to control the new stems , thus avoid hitting top bulb or side bulb radiation , or ventilators or other plants - food scheme stays on the stimulant side with the exception of barrier as i'm spraying as long as i can during flowering . probably until end of month. on the side note the autoflowering one is a bit behind compared to the others but is not that bad - for now. finishing result should be monitored if density and potency was affected by non optimal photoperiod for that one gal. Kind regards :) .
Likes
3
Share
@Mo_Powers
Follow
i was on holiday for 14 days and left the plant to its own (AUTOPOT takes care of that) and when i came home i was amazed. it tolerated the topping very well and is now twice as tall as it was two weeks ago. i topped it again straight away. so 4 times in total this time. if it continues to grow like this, it will be a monster in october. a few leaves are already bigger than my hand. unfortunately i broke one stem with light LST, which is why i'm not using the LST after all. i hope it recovers from the injury. 😵💪
Likes
5
Share
@PlantMike
Follow
The BMR sisters have started to fade quickly in the last couple days. Been feeding plain cold water to usher shut down in the plants. The buds are beautiful the chemical grape smell still remains and the trichomes are just about 90% milky with very few amber so far. The plants have a strong base and with the double layer scrog I don't have to worry about branches toppling so we'll just ride out this last week and harvest when the time is right!
Processing
Likes
29
Share
@Reaper
Follow
at this week u can compare the stems and bush in the videos, keep in mind this is my first hydro grow and i messed the PPM and PH a few times.. also snapped a whole branch of the hydro plant around week 4. still the hydro plant looks bigger and fatter stem. lol
Likes
10
Share
@L1lium
Follow
Es ist soweit! Am Freitag habe ich die fünf Easy Buds nach knapp 11 1/2 Wochen abgeschnitten und geerntet. Leider musste ich feststellen, dass eine Pflanze ziemlich stark befallen war. Ich vermute eine Milbenart oder möglicherweise Fliegeneier. Unterhalb der Blätter waren etliche dunkelgelbe und dunkelbraune Eier, die man auf den ersten Blick kaum erkennen konnte. Bei genauerem Hinsehen sieht man jedoch, dass sich der Befall auf die ganze Pflanze ausgeweitet hatte. Glücklicherweise blieben die vier anderen Pflanzen verschont. Aus diesem Grund trockne ich die Pflanzen auch getrennt voneinander. Die befallene Pflanze wollte ich nicht direkt wegwerfen, sondern erstmal trocknen lassen. Im Nachhinein werde ich schauen, wie ich mögliche Schadensbegrenzung betreiben kann. Die vier gesunden Pflanzen werden in einem geschlossenen Zelt in einem Trocknungsbeutel getrocknet. Die befallene Pflanze habe ich in dem Folienzelt aufgehängt und mit einer Plane abgedeckt. Nach wenigen Tagen der Trocknung sieht soweit eigentlich alles gut aus. Die Eier scheinen nicht mehr zu schlüpfen, sondern fallen von der Blüte ab oder verschrumpeln zu Kompost. Ich hoffe, dass es dabei bleibt. Der Geruch hat sich nach dem Abschneiden deutlich verändert. Schon nach der kurzen Trocknungszeit kann ich einen intensiveren Geruch feststellen, der sich noch nicht so richtig beschreiben lässt. Die Blüten waren stark mit den sogenannten "Sugar Leaves" verwachsen, weshalb ich sie grob getrimmt habe, um sie zum Trocknen aufzuhängen. Nachdem die Blüten vollständig getrocknet sind, werde ich die Buds noch einmal einzeln trimmen und durch meine Trimm-Maschine von Vevor jagen. Der Ernteprozess hat zu zweit circa eine Stunde gedauert. Die Pflanzen waren zum Zeitpunkt der Ernte noch sehr gesund und kräftig. Die Verwurzelung war trotz des geschlossenen Topfes sehr gut. Die schönste Bud hat definitiv die zentrale Pflanze, Greta, ergeben. Nass hätte ich den Bud auf mindestens 12 g geschätzt. Ein Gesamtgewicht des nassen Pflanzenmaterials habe ich nicht ermittelt. Sobald alles trocken und fertig beschnitten ist, werde ich das Tagebuch um den trockenen Betrag ergänzen. Stand jetzt würde ich schätzen, dass der Ertrag aller Pflanzen bei circa 40-50 g liegt, was mich für meinen ersten Grow ziemlich zufrieden stellt, besonders in Anbetracht dieser wirklich sehr simplen Strain. Mehr Infos und Fotos folgen in Kürze, wenn das Curing beginnt. Bis bald! :)
Likes
19
Share
@creichs
Follow
Got the screen in this week and managed to weave the plant into it somewhat Switched to flowering this week and can already see it starting to stretch Cant wait to start seeing some buds
Likes
145
Share
@Salokin
Follow
Hello Growmies, As we observe the growth in week 15, I'm filled with both anticipation and awe. She continues her impressive swell, and new white hairs have emerged, suggesting that the end of January might be too soon for harvest. The delicate balance of maturity is playing out before us, as the first few trichomes take on an amber coloration, signaling the onset of peak ripeness. There's a noticeable increase in her aromatic presence – she's getting louder, so to speak, filling the space with her potent scent. A beautiful fade is underway; the lower canopy leaves have turned a bright yellow and are gracefully falling away, a natural progression as she directs her energy to the buds. These, in turn, are taking on a striking purple hue, which is becoming more pronounced day by day. Each day brings a change, a new layer of complexity to her form. The way she's maturing, the hues she's revealing, and the scents she's exuding all contribute to the feeling that she's one of the most remarkable plants I've grown. Her feeding remains consistent at 4 liters of nutrient solution every four days, sustaining her through this critical phase. The light spectrums continue at full capacity, and she seems to savor every photon that falls upon her. With new growth still apparent, I'm considering adjusting the harvest timeline. Patience is key, as is careful observation of her trichomes and overall health. We're entering what may be the final stretch, but only time will tell. The yellowing of her leaves, the purpling of her buds, and the sweet, loud fragrance she's giving off are all signs of a successful grow coming to fruition. Stay tuned for next week's entry, where we'll delve deeper into her readiness for harvest and the splendid transformation that's taking place. Stay Lifted Salokin
Likes
1
Share
Monster maker photoperiod feminised has been developing at a steady rate since I see the 2nd node more clearly ansnow 3rd node starting to appear so thought I would start of with verry light LST to begin shaping the structure