Processing
Likes
34
Share
Sour Diesel Haze it taking over! She's huge!!! Bud sites have started to fatten up a little. I think she's done stretching (at least I hope so, I have my light cranked up as high as I can go in my tent). Looking forward to watching her fatten up during flower! 😃
Likes
19
Share
This was the first week with no nutes, just straight out of the tap water. I also upped the watering schedule to 3 times per day for 1 min each. I am thinking after watching this weeks timelapse that I will run the pump for 2 means on the parts of the schedule that the lights are on and see if that helps any. I also noticed that 1 of my plants, the one with the bigger buds and more crystals seems to be having its leaves turning yellow which I have tried to show in the last picture above. I believe it is because I have stopped feeding any nutrients and so now it is sucking what it can from the leaves. The other plants, especially my featured one do not seem to be doing this as of yet. I was hoping my closeup star of this diary, which happens to also be the tallest stem of the girls would also show the most growth, but as such, not much can seen to be happening. 1 more week to go before I cut and hang them to harvest and I will let you know how things turned out weight wise.
Likes
5
Share
@pzwags420
Follow
The start of week 5 is going well. Blueberry is smelling nice and my seedlings should be showing preflowers soon.
Likes
46
Share
Been flushing from day 70 (7 days) some nice purple and red showing as the plant uses its reserves up , I will chop tomorrow at 78 days of flower .
Likes
5
Share
Likes
17
Share
Wir waren schon länger neugierig auf diesen Strain. Als wir endlich Platz im Zelt hatten, war er überall ausverkauft. Aber hey, für was gibt's die Community :) - Vielen Dank nochmal! Nach längerer Zeit mal wieder ein FastBuds, wir sind gespannt. Gekeimt ist sie bereits am dritten Tag. Technische Daten zu dem Strain:Geschmack: Banane, Fruchtig, Gummibärchen, Erdbeere THC: Bis zu 31% CBD: 1% Ertrag EU Indoor: 500 – 600 g/m² Ertrag US Indoor: 18 – 21 oz/ft² Ertrag EU Outdoor: 80 – 300 g/Pflanze Ertrag US Outdoor: 3 – 11 oz/Pflanze Höhe: XXL Höhe EU: 80 – 150 cm Höhe US: 31 – 59 Zoll Blütezeit: 8 – 9 Wochen Geeignet für: Indoor/Outdoor/Gewächshaus/Mischlicht Geschlecht: Feminisiert Sativa/Indica: Sativa 25% / Indica 75% Genetik: Banana Purple Punch Auto RF3 Art: RF3 Feminized Auto
Likes
6
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D36/V32 - 21/05/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 LST 🧠 🚀 🎬 1 TL in her new home and one TL of LST job ______________ 📅 D37/V33 - 22/05/24 ⚗️ EC: 1.0 pH: 5.4 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 LST 🧠 🚀 🎬 1 TL video and one TL of LST job ______________ 📅 D38/B01 - 23/05/24 ⚗️ EC: 1.0 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 2L 🍗 💧 💼 🧠 As I saw clear signs of blooming, I need to pass to bloom phase so I put B01, in the header. 🚀 Clearly she's starting flowering 🎬 1 TL video and 1 LST video ______________ 📅 D39/B02 - 24/05/24 ⚗️ EC: 1.1 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video and 1 LST video ______________ 📅 D40/B03 - 25/05/24 ⚗️ EC: 0.2 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 15L 🍗 💧 💼 Flush for two days and then flowering nutes 🧠 I think no more LST, she's now full blooming 🚀 🎬 1 TL video ______________ 📅 D41/B04 - 26/05/24 ⚗️ EC: 0.2 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 Flush for two days and then flowering nutes 🧠 I think no more LST, she's now full blooming 🚀 🎬 1 TL video ______________ 📅 D42/B05- 27/05/24 ⚗️ EC: 1.1 pH: 6 🌡️ T: 20°C H: 60% 🌊 15L 🍗 Calmag - Bloom A-B - Bud Candy - B52 - Big Bud - Seaweed 💧 💼 👉👉👉 Changed res and added nutes 🧠 I think no more LST, she's now full blooming 🚀 🎬 1 TL video
Likes
14
Share
@Zengrower
Follow
The CBD has now fully recovered from her water logging adventure. The new leafs look very healthy and no signs of stress from the topping. I have to fix the ScrOG rack as the heat in the greenhouse caused the 3D printer clips (that hold the stand in place) to expand and loosen. Probably some binding wire will do the trick. Until I find a solution for the ScrOG rack, I applied an LST clip to the main branch. This will keep her from growing vertically too much. The next day the main branch was already pointing up. I attached some binding wire to keep the top horizontal and give the side branches a chance to grow taller. I bought some new clamps to keep the scrog rack in place. More on this in the next few days!
Likes
17
Share
And another one from BarrieGrower that going to be absolutely fire.
Likes
6
Share
they are eating like the little shop of Horrors "look it up" FEED ME SYMORE FEED ME! week 5 well under way and the ppm is in the 1800 range. n sign of burn yet so we will let them eat.
Likes
72
Share
@BodyByVio
Follow
Day 65 : officially 1st day of flush . Changed the reservoir with fresh water and 1.2g/5 gallons of Yucca extract and 5ml/gallon of Cleanex from Botanicare . Day 68- I did some defoliate. Few more days until harvest.
Likes
9
Share
It's been great.. upgraded their tent, girls are stretching fairly but not excessively. I remove lst tie downs before flowering [experiment] but had to redo to maximize light penetration, previous topping and lst created a lot of bud sites Happy growing guys..
Likes
3
Share
@Kayotic
Follow
I've been bad at updating on here, harvested on January 13th. Super frosty and sticky.
Likes
34
Share
Dec 8th Put 3 seeds into distilled water PH = 6.0 Soaked seeds for 18 hrs Dec 9th Put seeds into RapidRooter plugs Placed seeds into starter tray with cover and heat pad Dec 13th 2 of 3 have popped up ⬆️ today Dec 15th Looks like all 3 have germinated Started using fluorescent light pic above 18/6 schedule Dec 19th All three are up Two have there first set of leaves The third to sprout is just starting to make its first set of leaves Three for three 100% germination Dec 21st Planted into 4” baskets filled with hydro clay pebbles Dec 30th Second set of leaves Jan 3rd Planted seedlings into a 30 l res
Likes
Comments
Share
@Hou_Stone
Follow
24 Febuary The plant are going good, its just looks like she's getting a small carence in phosphorus, propably due on the bit too cold condition on the night for the roots I switch for an more powerfull lamp with 300W max but I put it at 75% of capacity or its getting too hot for my room.
Likes
15
Share
@Brickie74
Follow
First time trying this strain and seed company. I have an Altoids box that i lined with sand paper (120 git) i shake my seed(s) for about 30 seconds to a minute in the box. I then soak them in water for about 15-18 hours. When done soaking i put the seeds on a plate with paper towels until i get a tap root that is atleast 1/8" prefer 1/4". Then at that point i put them in a Jiffy Pod until about 1.5 - 2.0 inches.
Likes
8
Share
@CalGonJim
Follow
2/23 4 AM all the photos are in one grow. They’re doing OK Ricky‘s doing surprisingly well I really tortured that plant. I think I’ll keep Ricky for a permanent grow. I’ll flip her back to edge when I’m done. She’s a lot of fun to grow really strong. All of the grim brothers are incredibly strong. Doing great much better now that I have general hydroponics as a nutrient made all the difference all of the Tyson 2.0 seeds are doing great. I have punch pie and gelato 44 going and they’re fine. Montel is doing good in a small container and so is ice.T body count. 👍👍👍👍 2/28 1:58AM https://www.youtube.com/@KittenAcademy KITTEN ACADAMY REAL KITTIES....SO DISTRACTED :)