OK. Now it's getting tough. I actually did not think it was going toever be real ' work '.... but good gravy... this is hard on my new titanium knee!

I have a huge smile on my face because I’m getting closer and closer each day to smoking my own cannabis. Never buying weed again. Still on one tent but by this time next year the plan is to have a veg room and a flower room. Anyways. This past week has been great for the plants. Taking water nicely. All plants flowering nicely from what I can tell. Nothing looks odd. No insect or bacteria issues. Knock on weed... hope I didn’t jinx myself. I’m adding a dehumidifier and should be in by next weeks post. From what I read is if they get too wet and moist the plants can develop mildew or mold and fungus and also it says that after a rain or watering you want the pores of the leaves to open back up and if it’s too wet they never open and stop producing. Sounds good to me. Also. Got a new phone. First one in a long while and I made a short vid.

Still flowering 🤣

Buds should be dried in the dark at 21 degrees in 50% humidity

I’m very impressed by this strain. This is my first Atlas Seeds grow and it’s dominating my Mephisto genetics in frostiness. She’s already browning on the pistils, this will be a fast, potent, high yielding harvest!

Just got done with trimming the 4x4 @greenhouseseedco Super Silver Haze / @blimburnseeds Silver Surfer Haze tent. The final yield is exactly 1000g plus some (kind of a lot)that I smoke in the last 2 weeks 😃 Also got 6, gallon size ziploc bags filled with good quality trim for concentrate. To be honest I was expecting a little more but keeping in mind that this grow I did not supplemented with bottled CO2 I think I’m good with the results. Definitely I enjoyed a lot this grow and I’ve learned even more.

So it's time to harvest Russian machine guns. The plants were high because we pulled them with a lamp and did not use LST. The final product was removed on the shelf of the refrigerator.00

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 27/12/2019 - Fed her 1.5l of 6.4PH water with 0,5ml of each: Grow, Bloom and Max, and 1ml of each: Heaven, Alga-mic and Vera, I use about 1/3 of the nutrient dosage on the chart, to achieve about 200/300PPM (500 scale). 01/01/2020 - Fed her 1.5l of 6.4PH water with 0,25ml of Grow, 0,75ml Bloom and 0.5ml Max, and 2ml of each: Heaven, Alga-mic and Vera, mesured about 280PPM (500 scale).

Sticky and loud is all I can say! Hopefully whatever damage and burn I have doesn’t hurt my buds too much l! But otherwise they’re stacking up well! Couple more weeks to go!

Hallo zusammen 🤙. Sie wächst sehr schön 😃.

what a week!! been battling with thrips 🤬🤬but i think i got it under control now!! plants though are happy and always happy! this kind led X² is a insane light, powerful as heck! buds coming in nice i think this will go over the 8 week flower for sure... bud sites still small and need to fill in so i’ll be watching for bud growth in the next week or so! thank you for following.

The plants continue to develop more and more flower clusters all over the main and side branches, its FANTASTIC to see. 😍 The Shiva Skunk is still a little bit taller (47 cm) than the Serious Kush (42 cm), but the Kush plants have denser flower clusters. Trichome production is now in full swing under the Q6W-Gen.2 LED-lamps, which are still dimmed to 100% (=3 green lights on the dimmer). The plants SMELL DELICIOUS and have a STRONG AROMA now! The Shiva Skunk has a very musky and sweet aroma now with hints of citrus in it, while the Serious Kush smells 'dank', it has an extraordinary strong and gassy smell which is intoxicating!

Everything is going great, the plant is absorbing the nutrition well, and the branches are following me well during the LST technique. I am satisfied so far. Please write your review about both the plant and the manufacturer.🙏

Can’t believe I got 78g of bud of her! That’s nearly double what I usually get of 1 plant 😂 maybe it was due to giving her 7 weeks of veg, rather than the usual 4 weeks!? Either way I’m buzzing She’s coated in sugar and stinks!! The high is strong giving a massive couchlock and the munchies! She smelt and tasted like usual cheese but obviously much nicer and stronger 😌

Think I’m going to have to harvest maybe a little early as I will not be around to water the plant.🤷‍♂️🤷‍♂️ bit to sure if it’s ready or not. What do you think is it to early and how early ?

N'hésitez pas à me contacter si vous avez des questions! Pour préparer votre solution, dans votre réservoir ou arrosoir : Mettre en premier la base (Iguana) Ensuite Ancient Earth Et enfin les bactéries ASSUREZ-VOUS D'UTILISER UNE EAU DE BONNE QUALITE (EC < 0,2) POUR DE MEILLEURS RESULTATS. J'utilise un substrat non enrichi pour permettre le meilleur départ à mes plantes. Il s'agit du Promix de Plagron, il a une EC proche de 0, c'est pour cette raison que je commence les engrais assez fort dès le début. Les plantes sont très gourmande sous LED haute intensité et l'enracinement est rapide. J'arrose tous les 3 jours environ avec 2 arrosages à l'engrais et 1 à l'eau par semaine. Je n'attend pas que le substrat sèche complétement sinon ça réduit l'efficacité de l'arrosage, ça détruit la faune et éventuellement facilite la cristallisation des minéraux. Au niveau du volume d'arrosage, il faut prendre en compte 1/3 de la taille du pot. Pour un pot de 1L je vais donc arroser environ 300ml. Pour un Pot de 10L je vais arroser environ 3L. Il est important d'arroser doucement pour éviter que l'eau ne coule tout de suite au fond. Il est important d'avoir au moins 15% de drain pour s'assurer d'évacuer tous les nutriments non consommé et faire la place aux nouveaux. IL EST PRIMORDIALE D'EVACUER L'EAU AU FOND DES COUPELLES, c'est une eau qui est chargée en nutriments non consommé et on ne veut pas qu'elle remonte dans les pots car cela risquerait de créer des blocages. Au niveau de la technique de taille de formation, je réalise tout de suite une FIM que je reproduirai dès que l'apex aura repoussé. La première FIM est la plus longue mais les suivantes sont très rapide car la plante s'habitue à la technique et cela la stress beaucoup moins. En général il faut reproduire la FIM tous les 3 à 4 jours en fonction de la vigueur. C'est une technique très facile à mettre en œuvre et ne demande aucun matériel. C'est aussi la plus rapide pour obtenir des buissons. N'hésitez pas à me contacter si vous avez des questions concernant la FIM! Je retire également les feuilles supérieur (pas toute pour éviter de ralentir la plante) qui cache les secondaires pour augmenter l'efficacité de la FIM sur la croissance des secondaires.

Bisher lief fast alles problemlos und ich hab mich weiter am LST probiert. Mir ist ein Ast komplett abgebrochen, aber ich konnte ihn wieder festmachen und er ist verwachsen. Allerdings ist der Ertrag sehr schlecht im Vergleich zu den anderen Ästen. (siehe Bild: Bruch) Werde das nicht wieder versuchen.

Привет друзья. Моей растихе сегодня 71 день. Был в отъезеде, не поливал. В связи этим растение не много подсохло. Как придёт в чувства. переведу на цвет. Начал применять LST технику на 19 дне и продалжаю применять её через день, а 18 августа добавил ДЕФОЛИЗАЦИЮ С 20.08 ДЕФОЛИЗАЦИЮ делаю каждые 3,4 дня С 20.08 LST технику делаю каждые 4.6 дней На сегодняшний день влажность 60% 26 дней назад заметил высокий Ph 7.9 С 48 дня Ph не ниже 5.8 На сегодняшний день Ph 6.0 Начал кормить с 60 дня Canna Terra Vega PPM 550 Погладитель влажности, выполняет свои функции. Посмотрю на динамику. Всем мира и добра! https://t.me/smail_seeds #Smail_Seeds

Day 56 of flowering of the CBD spliff Berry From Spliff Seeds Getting to the end of the line of this beautiful 2 plants she frosty she smells absolutely amazing and the only thing that is still going on is flushing and i hope i can cut here down Sunday will see i want the ppm to go lower for fine end result i am not going to cut corners on this grow it's looking and going to good for that 23/12/21 Run off was 1600 ppm so almost there 25/12/21 Runoff is around 700 ppm I will be now drying the pots out and then it's chop time for these 2 26/12/21 Day 58 flowering runoff 550 ppm 🤘🏻 There looking frosty smell absolutely 🔥🔥🔥 thricome are where i want them and has a day to go to dry out the soil and then light's out for 24 hours it was a perfect grow From beginning to end CBD SPLIFF BERRY From @spliffseeds 28/12/21 Chop chop 1 CBD spliff berry I have decided to do one wet trim and one dry trim so will be trimming first one tomorrow and goes into dry reck One left to chop good times Happy holidays people hope you have some great days stay healthy take care of the one's around yeah and let next year be more weed and Less fucking corona so i can get my ass to Alberta Canada for month vacation to see if we could move there 🤘🏻🇨🇦🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter