Limpieza de bajos

So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.

Day 1 Today is the first day of flower here we go doing a water changer in 2 or 3 days will set it to 900 or so can't wait to see the first buds on my girls a lot of love in this grow Day 2 Ppm at 450 now time to change out tomorrow Day 3 have a five gallon bucket at 1500 PPM to add back during this week is the reservoir gets low. ppm's are at 1150 with a fresh change of all the water we'll see how she's doing tomorrow Day 4 had a major disaster last night went in to check everything and have an inch of water inside of the tentnot too much water drain from the pots that the roots got dry but it did sprung a leak when I change the water out I filled the buckets too high so my sealed job broke had to think on my feet put the 4 plants into DiY dwc buckets I built with their bubble inside no way of maintaining the temperature in there going to have to get some kind of a new epoxy and hopefully have the system up and running tomorrow. Day 5 all is well with the grow again completely cleaned out the system and all the buckets put the new epoxy on there and everything is leak free did another exchange what the plants back to their original pots with a slight adjustment to the placement I hope the stress of moving the girls is not going to affect my yields too much it is only day five of flower hopefully everything's smooth sailing from here on out P.s had to add the 5-gallon of 1500 PPM nute solution to the reservoir to get everything at the proper level along with some extra Cal mag and a small amount of the other nutes the PPM in the system is now at 740 Day 6 happy to say not much to report lol everything looks good 🙂 Day 7 week over

Weekly update on these ladies. They're still growing great but I've definitely stunted them messing up my ph. All in all they're progressing from week to week good, so it'll be cool to see how the flower stage goes. Getting two distinguished phenos I can see one more purple then the other more green one. Happy Growing

Howdy howdy howdy, What's good peeps!? Iv got some spare time these days so I figured I'd document my fun farm for anyone that wants to follow along 🤷‍♂️😎 Week 1 is nothing special. Took 8 trainwreck clones 6 days ago from 2 separate mums that are about to be flipped to 12/12 (4 from each). After 6 days they still look perfect so I'm hopeful all 8 will root nicely🤞🏻 Nothing special in how I took the clones. Cut, scrape, clonex dip then straight into tiny rock wool cubes. I'm a cheap cunt so I'm using 1l bottles as humidity domes, they work fantastically if you are wondering 😎👌🏻 You can see in the video the 2 mums they came from. I won't be doing a diary on them but I'll probably post pics of them here n there if people want to see how they are going 🤷‍♂️ Anyway, that's about all there is to say about it all atm. Tune in every Friday for my fun farm updates Or stop by the NO.1 cannabis channel on SENSE.CHAT 💚💚CannaChat💚💚 for some more dopey content by yours truly Double_oh 😁✌️🏻💚

Week 6 for Moby Dick, She was moved outdoors at the start of the week, shes been adjusting well besides the fact shes been having issues with aphids 😥 But shes been getting sprayed water every sun rise to keep them under control as well as me going in there & killing them when i can spot them every morning & evenings. Trying to get my hands on some pyrol products to clean her up nicely as well as clean up the outdoor space. But wow look at her size... really looking forward to her coming out with some flowers😍

Fed once this week with a weak feed including top max. I use kombucha vinegar as pH down. Water from my tap is ph6.8-7.0 and 38-42ppm so I might start using calmag supliment as the ppm at my old house used to come out of the tap at ph7. 2 and 200-220ppm. I had 2 plants that didn't like the light at 30000 lux and started bleaching so I took them out. I've defoliated today day 35 as humidity was getting over 80% and also to let light to the lower bud sights. Pre flower pistils showed on some plants around day 33 (some still have none) so I'll consider this the end of veg start of flower. The kalimist indica pheno is still not showing pre flower pistils but is always hard to force flowering when it's not mature for some reason. It's always 7-14 days behind everything else 🤔

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

March, 9th. The Green Monster Autoflower is performing very good. The Plant in the little white Sheep has Flowers along the whole Plant The Plants are into less than 10g of Soil, they are diving evry Day into Feedingsolution I think 2-3 Weeks to go here......

here we are guys in the middle of week 8. the grow has been pretty good lately, just messed up some refilling but corrected immediately. as you can see from the pictures i did some mild defoliation to expose the lower buds. what do you guys think? to be honest I am pretty proud of the grow the girl looks beautiful. I am thinking about getting a 600w led and probably a bigger tent (100x100x200, 3"x3"x6") as always guys, advices are always welcomed keep growing 👍

Week 4 of flower and we have baby buds. The plant that had to live outside the tent is stretching for the light, but doing well. I open the tent from 7 am -7 pm so she can get some light, but it is not quite right so stretching. Lots of height change and smells are getting stonger but still mild.

Update coming.

Day 42 - changing into flower, maybe 1 male/female... idk, yet.... adjust a little, here, there, add abit of water, and 6.2 PH and 1400 ppm ... been watchin the temps.. heading into summer so it'll be 33oC outside the tent tomorrow..... the tent is keepin below 26oC atm, gotta watch the weather, lol........ keep the water in the tanks below 22oC if i can..... goin to stock fridge and freezer with chilled frozen water/ice ... for the tanks on hot days..... been bending them abit, they've fully recovered from the trim, i'll let em go now till they need a final mid flower trim..... not much to report... "monitor, adjust" part of the grow... 👍😎

She is so nice from all aspects how she grow,the leafs and flowers site. Really happy with this plant now she need 6 more weeks to finish

Day 29 - Topped both ladies at the fifth node and removed any growth below. Growth exploded since transplant and first dose of nutrients. Day 30 - Watered both ladies with around 100ml of water. They recovered from the topping and look as healthy as can be. Very happy with progress. Day 32 - Misted both ladies. Day 33 - Watered both ladies with around 250ml each. Increased dosage slightly from last feed to see how they take it. Day 35 - Misted both ladies to keep them hydrated. Maria is doing well, showing vigorous growth. Planning to top her again next week and remove any growth below the topped nodes. Juanita has fallen behind, new growth points seem to be growing sideways. Keeping an eye on her progress, hopefully she turns out ok. Not planning to top her again until normal growth resumes, do not want to stress her out.

Everything coming along nicely. I’ve discontinued all nutes but will give one more little top dressing to the cheese plant tomorrow then that’s it. Just straight stabilized RO water from here out. The slurricane is just packing on PM like crazy. The cheese has actually stopped the spread for the most part. At harvest I’m going to wash the shit out of the slurricane and cheese with some warm RO water and some h202 to get the majority of it dissolved. Other than that the quality of the slurricane is beyond ridiculous. It’s by far the stickiest strain to the touch in the tent. It’s probably winning for smell too. It’s straight gassy licorice pine. The pm susceptibility is a deal breaking drawback though. The cheese is looking good and smells great. It almost smells like rotten milk. Some of the nugs are really filling out into these nice long chunky little things. The pistils are turning a light orange/pink color too. Unfortunately it’s not maturing at the same rate and will make everything in the tent go for another 1.5-2 weeks. Garlics are looking better. The lanky pheno has filled out quite a bit more than expected and is super frosty with a great smell. It’s finally starting to purple up a bit. I think it will still be quite leafy around harvest but time will tell. Pheno 2 has better structure and density but lacks frost, smell and color. Not very impressed by it honestly. The zkittlez is looking great and getting super frosty. Especially around the crowns of the top colas. Lowers look like shit though. Despite being somewhat leafy, the main branches look quite dense. It’s probably the shortest and bushiest plant in the garden. It’s yellowing out quite a bit now and will probably finish with the blackberries and slurricane. The blackberries look amazing and smell even better. One of the phenos is a crazy producer and creates massive buds with musky berry terps. The other pheno is a beautiful purple strain that produces a crazy amount of frost and chunky golf ball nugs at the expense of large yield. It’s smell is very sweet and candy like and has been a very low feeding and maintenance plant. Slurricane #4 looks great aside from its infection. It definitely wins for resin content and smell but looks like a low yielder.

Plant keep growing great. As you can see at the leaves there are some of the tips of the leaves with bad color, thats because teh EC reached up to 1,8 so I added ph leveled plain water with 0,4 ec to lower the ec to 1,5 and the plant is responding really well, growing faster and with a healthy root system. The temperature was high also (near 30 degrees celsius) so i moved the lamp upper and i will setup an 100mm fan for extraction. The led panel is really really hot

Uploaded a video of all my strains together she in the left back corner and did a separate video of her by her self this is my favourite smelling plants she's phenomenal she really is