Strong growth In 1 week...looks very promising.

25 Sep 2021 Today I’m starting Week 12 of this grow, and I couldn’t be happier. My 3 Ladies are looking great! I’m not seeing any negative signs that they’re not loving the increased nutrients. 👍🏻 so far, so good. I’ve moved up to step 7 of my 6 - part Flora Trio feed chart. It doesn’t change anything, so I figured I might as well. They will be getting the same amount they received the last feeding. They received: CALiMAGic 2ml, FloraMicro 3.8ml, FloraGro 3.8ml, FloraBloom 4.2ml, Floralicious Plus 2ml, and Liquid KoolBloom 1ml. The initial pH of all 3 gallons was 6.2. I added 2.2ml of pH UP to each gallon which adjusted the pH to 6.7 in all 3 gallons. The runoff ph was different for each (of course). C1 was 5.8, C2 was 6.0, and C3 was 5.7. 🤷‍♂️ Everything is going great, so…… If it isn’t broken, don’t fix it. I read an article about “popcorn buds” yesterday, and the importance of pruning them to get the main colas to fatten up better. I figured I’d give it a try, why not. Most of the popcorn buds go into the trim bag anyway, so why not, what do I have to lose? Hopefully not my perfectly healthy plants! The worry is hurting the plants more than helping them. I trimmed all of the small, lower branches off, as well as many of the smaller branches in the middle that don’t really receive any direct light. The stack was quite big once I was finished. You can see it on the video log I uploaded today. The temperature in the grow tent today was 84F, with humidity at 54%. I have the best of hope for a wonderful grow, but I just hope that they respond well to all of the trimming I’ve done today. We’ll have to just wait and see. Happy growing Growmies! 28 Sep 2021 What’s up Growmies! I have good news…. My plants are still alive and doing well! I was a little nervous after the last feeding and pruning session, but my babies are doing quite well. The last three days have shown an absolute explosion in pistil development all over all 3 plants! Some of the nodes are showing white and pink pistils, and their growth is lovely. They seem to be responding well to the full nutrient levels, but there are some mild signs of nutrient burn, but only on a few leaves. Most of the plants are still looking marvelous. I’m very happy with how they’re growing and to how they have responded to my trimming 3 days ago. I haven’t changed anything in their feeding from last time, so I’m just going to list it out here for you all to see. They each received the same amount in their own gallon of water. Each plant took the whole gallon, and the runoff was as expected. Each plant received: CALiMAGic 2ml, FloraMicro 3.8ml, FloraGro 3.8ml, FloraBloom 4.2ml, Floralicious Plus 2ml, and Liquid KoolBloom 1ml. The initial pH for all 3 was: 6.2, so I added 2.2ml’s of pH UP to each gallon which adjusted the pH to 6.7 for all 3 as well. My new TDS meter will be here Friday, so all I have for the runoff is the pH. C1 was 5.8, C2 was 6.0, and C3 was 5.6. I’m going to stop fretting over the runoff pH because it really doesn’t seem to matter a whole lot. However, I’ll still keep track of it nonetheless. The temperature in the tent today was 84F, and the humidity was 48%. See you in a couple days. Happy growing! 01 Oct 2021 Today I finally received my new TDS meter, and it stopped working after the first use! I was like, “Damn! WTF!!” For real, no bullshit. It sucks. Anyway; I just felt like sharing my woes with you all. Most likely it’s just me typing to myself. Today my lovely ladies got the same that they’ve been getting for the past couple weeks. CALiMAGic 2ml, FloraMicro 3.8ml, FloraGro 3.8ml, FloraBloom 4.2ml, Floralicious Plus 2ml, and Liquid KoolBloom 1ml. The initial pH of all 3 was 6.2. I added 2.2ml’s of pH UP to each gallon which adjusted the pH to 6.7 for all 3. The one time my new TDS meter worked, the TDS of C1 was 711 ppm. It stopped working after that. The runoff pH was C1 - 5.8, C2 - 6.1, and C3 - 5.7. The temperature in the tent was 84F, and humidity was 47%. My girls are looking wonderful, but there is some nutrient burn as I mentioned the other day. It hasn’t increased, which is good, but some of the larger fan leaves look like they’re losing a little color. The pistils all over the buds are growing even more, and the light pink hairs are now becoming numerous. They’re very pretty and look healthy. I’m smoking their Mother right now, which gives me happy thoughts for a wonderful harvest of her children soon to come. 😍🤞 I moved them all out of the tent briefly today for some cleanup and repositioning. They look good standing alone as much as when they’re together. I moved the fans around to give them more space and to improve ventilation and light distribution. I also did some LST on C1 and C2. I tied some of their longer, yet lower branches up to make them look up to the light instead of being toward the side. 🤷‍♂️ we’ll see if it makes a difference or not. Today is the last day of week 12. See you in 13. Take care, and happy growing.

It's pre flowering period, All organic, No nutrients, 50 w led bulb. See you soon in Mexico 👊😍🙏

This time I dont top them to See how she Looks naturally! Without to much Stress,Even if I recommend 1 topping doesent matter if you run it First to See what they do when you let them grow normally Now they all showin there female Parts,what we all love to See 💚

These ladies are doing their thang! One week since sprout. Had to move them to cups to support the stem as they were flopping. Placed a fan for circulation to try and get some strength in them. First feed at the end of week one. Went with half dose of the 1EC measurement as per Pro Line chart.

Just put her on flush on Monday

Day22 Minor lst but that’s about it. She’s doing well and I just chopped her sister today, this girl and a few more left of this cultivar. Thinking we found the keeper already but only the cure will tell for sure.

Buds are really coming on now. Stretch is slowing. Very happy with the new lights and fan. Not sure I'll do scrog next time as its hard to keep up with all the grow and pruning/defoliation required. Adjusted my lights to get everyone even coverage. Light meter would be nice at some point!

8 days from germination, advice is accepted

And off we went, the adventure with Zamnesia's F1 Hybrids started off great, with a stunning 100% germination 8/8 born without any hesitation after a very short time in water and subsequently in soil. She is exactly at the 10th, she is the Wurlz, she grows well regularly and very similar to the little twin. One of the characteristics of the F1 Hybrids is stability and for now it has been thoroughly demonstrated since day 10. For the rest we have to say everything is going very well, the parameters are in order, the girls were born in a biodegradable jar which biodegraded a little earlier than expected and I proceeded with the potting, no repotting, be careful the seedling never came out of the jar biodegradable the roots pass it at a certain point of decomposition. So we are now in a comfortable 11 liter house that is perfect for autoflowering in my opinion. Unfortunately, the Zamnesia pots are about to arrive but I didn't have them in time, I preferred to repot them for the sake of the plants, we need to photograph them of course but first and foremost I'm a grower and I care about the health of my little girls. Something tells me we will be growing a lot of Zammi plants so we will use them in the Official Grower version next time. Wurlz F1 seeds specifically https://www.zamnesia.com/10669-zamnesia-seeds-wurlz-f1-automatic.html Site Description ZAMNESIA SEEDS - WURLZ F1 HYBRID AUTOMATIC: EFFECTS TO LEAVE YOUR HEAD IN A WHIRL! As the end product of combining Runtz with Watermelon Candy, Wurlz F1 hybrid Automatic showcases a reliable, uniform, and, above all, easy growing experience. The resulting buds offer mind-blowing flavors and soothing effects, making Wurlz F1 Automatic more than worthy of being on your radar. GROWING WURLZ F1 HYBRID AUTOMATIC As an autoflowering strain, it takes just 9–10 weeks for Wurlz F1 Automatic to move from germination to harvest. Fortunately, there's very little required other than a bit of maintenance along the way. This is partly due to the F1 genetics that make this strain robust and uniform, resulting in plants that reach a similar height and provide a similar (large) yield. Moreover, Wurlz F1 Automatic is highly resistant to disease, pests, and other ailments. Reaching heights of about 65–80cm, Wurlz F1 Automatic is not an overbearing plant and can fit into smaller spaces with zero fuss. Once ready to yield, growers have the potential to see a return in the region of 450–500g/m² indoors and 50–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF WURLZ F1 HYBRID AUTOMATIC After Wurlz F1 Hybrid Automatic wows you with its easygoing growing experience, the best is yet to come: the smoke test. Teeming with terpenes, this cultivar offers a fruity and candy-like flavor tinged with just a little bit of pine for good measure. In terms of effects, Wurlz F1 Automatic is bolstered by 24% THC and a finely tuned array of cannabinoids, making for a soothing, physically relaxing, and, in larger amounts, couch-locking high. So settle in with some of your favorite friends, snacks, and movies; this is relaxation at its finest. As for fertilizers, I'm doing a small comparative experiment to finish off the fertilizers I had at home, it's not 100% indicative, it's only on two specimens but given the stable genetics I decided to try to compare the results of Plagron Vs Aptus, both excellent brands which they will certainly produce beautiful plants which are already of excellent stable genetics. In the next few weeks the comparison will be more evident now the seedlings are still very small and just potted. So seeds of all brands, in addition to these great F1 Hybrids and the entire Zamnesia line, fertilizers and everything related to the world of cannabis, you should buy them from the best online store in the sector www.zamnesia.io

These 3 ladies are exploding in growth and doing quite well.Its almost spring so heavy rains keep the humidity a little high.Im running the ac infinity inline fan to pull some out keeping it in the 60s.Light intensity is still set at 50 percent power which I’ll leave it there and let these girls stretch out a bit.Im still doing a lot of leaf tucking and pinning branches to get a wider structure.The one special lady that I topped at week 3 will have a ton of colas and be a really cool

This is the first run. Much like a try out. Like or comment.. Thank you....

To be honest I have not been counting days.Put my guesses around 10 weeks of flower or so... i've been giving her ice Waller. The last week to try to bring some colors out... These buds are the hardest nugs.I have ever felt in my life... Might not be the most girthiest, but they are rock solid... Thank you @Grow4releaf.. God bless and happy growing 🙏

Это всегда было приключением. Этот сорт выращивался и в ауте и помещениях, но никогда он не был таким маленьким, как в этом случае) Очень интересное путешествие, но и очень быстрое. Я не прилагал усилий, растение само росло, справлялось с высокой температурой и стабильно росло. Хорошие показатели в скорости цветения! Даже в партизанском выращивании, ей понадобится не больше месяца для наращивания своих цветов и ещё один месяц для их доращивания и созревания. Этот сорт быстр и неприхотлив. Могу рекомендовать его новичкам, желающим получить свой первый опыт выращивания на открытом воздухе.

No nutrient deffiencies 💪 they growing healthy AF! Everyday LST is my job 😂 I will try to make about 6-8 main colas with this method! Also little defoliation, just to make the light more effective👌 things getting more and more interesting lets go wow!!😈 100%ORGANIC no chemical nutrients!!!

❄️Après 53 jours de floraison j'ai récolté 2 plantes de kong's krush qui m'ont donné 41 grammes de bourgeons sec et manucurées. ❄️Je pense que j'aurais pu ajouter + de nutriment dans mon sol et arrosé plus fréquemment pour avoir un plus gros butin, c'est prévu pour la prochaine culture ! ❄️Je commence à gouter mes bourgeons qui sont encore en train de curer depuis 5 semaines. ❄️Chaque variétés ont des saveur particulière et j'ai toujours ça trouvé assez complexe de les décrire. En tout cas La saveur de la kong's krush est vraiment inédite pour moi et vraiment plaisante. Je lui trouve un petit coté pétillant,☄️ ❄️ ❄️Mon instagram : https://www.instagram.com/hou_stone420/ ❄️ ❄️Passez une bonne journée mes amis, Merci pour votre visite 🙌 ☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️

This little girl started her journey on April 4th with germination into a water glass and finished up on June 27/20 – Day 78 from germination. She was a fun grow and was very resilient through the whole run. She spent most of her grow time in a 20/4 light schedule. She formed nice frost levels and stayed to a very nice and manageable height of roughly 20” tall without topping or bending her main stem. She was not as fussy about nutrient levels and took them well. She does like her medium on the dryer side though. Small little auto bush of OG Kush crossed with Indica genes😃 She would make a nice a plant to run while you are vegging out some photos for 6 or 8 weeks as she is not very big in size but will swell up and yield decent weight👍 She was grown in a 3 gallon fabric pot with coco coir and maybe 15% perlite. She was fed salt based nutrients……..so sorry but they are flushed out and that is what I am more comfortable with. Focus on the early growth with microbes, fungi and kelp!! She was fed the normal pattern with pH being held around the 5.4 to 5.8 range in feeding. Then as flower approached, I gave the pots a more consistent look at the runoff numbers and she was running 7.8pH coming out of her!!!!! WTF. She stayed in her pot that she was planted in and fought this issue all through the rest of her grow. The pH issues started surfacing around week 3….as we headed into flower of course. Scratching my head for weeks, I ultimately didn’t change anything other than really low pH feeding going in…….below 4 idea. For weeks she had 3.9 water going in and still getting 7.8 running off. I initially felt it was related to cheap fabric bags so I cut slits in the very bottom of the bags that stayed and tried transplanting other girls into plastic pots, which it can be fabric pot issues but I am not as convinced anymore for this run that there was an issue there, wasn’t sure about giving her Magnesium on top of Magnesium and therefore did I mess her up good on the inside early on in week 2 idea, out of options I changed back to RO water and that seems to have solved my issues……I was using tap water that was not filtered this run🤬 The pH was high so that was adjusted but with the ppm being at 185 to 200 range I chose not to buy a filter and just dechlorinated the water only. I was tired of lugging 5 gallon water bottles in and out of the basement😃 That is a difference from all other grows…..silly for not catching this by week 4! So…….back to lugging bottles in and out of the basement😂😂😂 She really started to take shape around weeks 7 and 8 and formed a beautiful little cannabis plant and grew to 20” tall and roughly 18” wide. Main focus with her was to just perform LST on side branches and let the top go…….I wanted to just let her go and see what would happen to her main cola for size and height……plus I don’t do that…….I always bend over the tops on my grows so this was a little different for myself. She grew very nice leaves and a lot of them. This pheno had a lot of leaves to her and that is fine……its not really my first choice in characteristics of a plant though..…..so much more work at trim time……Green Poison XL Auto, SWS71, was a dream to trim👍 as a comparison!! She didn’t fox tail very much she firmed up her buds towards the end. The resin production was a little slower coming out in her but by week 7/8 she was getting pretty impressive😋😋😋 White and sticky!! She smelt of woods with citrus notes…..works for me👌 There were no issues at all retaliated to pests or bugs……I threw in a couple sticky traps but there weren’t any to catch. She handled the high humidity in this run great and there were no signs of any powdery mildew👍👍👍 She is a very stable strain from Sweet Seeds! Day 63 was last feeding, flushed for almost two weeks. Rezin and Liquid Weight still given for one of the weeks but the last week was plane water. In hind-site I think I should have hit her with some Flawless Finish to help get that last bit out of her. She did feed on most of her nutrients but some of the lower leaves were still more green that I would have liked. She was cut down on day 77…..11 weeks is about what I suspect looking at her in week 7…….this was roughly 8 weeks flower time……makes sense😃 She grew for 75 days and then I decided what the heck…….she needs a hole in her stem to stress her out😃 I didn’t try breaking a branch but rather drilled a hold into the base of her stem……something new to try out. I think I will try more holes next time….max 3 I think……then I want to run a couple with cracking their stems and see if there is a difference👍 I feel more in control of a drill and its accuracy vs bending branches and they snap where they want to…….anyway it was worth a try!!!! Worst case, it made it easy to hang her as a whole plant to dry😃 This girl battled pH issues all her life and as a result the buds were not where I would have liked them. There were not fluffy…..but here were not as hard as I would like for rolling joints, so the whole girl went to concentrates She dried for 7 day as a whole plant, 2 days more in smaller branches, then 1 day curing in jars before dry ice sift. She yielded 74g of dry cured buds, 2.65 ounces. Not bad…..I don’t think her buds would have gotten a lot bigger but they certainly would have had more weight if they firmed up…..grower issue, not genetics. So…..lets make some rosin from this girl🤩 The yields on this and making her hash a perfect colour are not what this process is about…..let’s get that out of the way right away……this is about another way to enjoy and consume my cannabis for my own relaxation and medicinal needs. Taking pictures of rosin is always a challenge…..it is always dark in the pictures unless you are using a nice DSLR to let more light in. Rather than making bubble hash with water, I just used the bags to make a dry ice kief from the buds. Unfortunately I couldn’t get a block of dry ice and had to use these cubes…….don’t like these as much because there are too many surfaces beating your green plant material and your kief goes green before long when shaking. Could have done it with out ice all together…..nicer hash but lots left on the plant afterwards that way so yield is low. Used two bags in this extraction, the 220 as the bag for edibles and the 120 as the bag for pressing rosin to smoke…..dry ice hash rosin!! The yield on this from the 74g of bud was 22.4g kief. 220 bag was 12.6g and the 120 bag was 9.8g. Not great I guess but I didn’t want to keep going for 4 and 5 minutes with the bags…..these were roughly 2 minutes with the 220 being 3 minutes on the high side. You can certainly see that the 120 product is more golden in colour than the 220 but since I didn’t crazy, the 220 is still a very nice colour. Last step on this journey was then to take the kief and make our rosin. I pressed product using 37um bags with the temp set at 160 degrees. All were done the same for the most part……roughly 4 gram presses, the same temperature, and the time. The first presses were 90 to 120 seconds. If a second press was done on the pouch, then it was at the same temp but for only 40 to 50 seconds. The yield on this was just shy of 7 grams…….6.77g…..roughly 30% yield from Kief???,…..roughly 9.2% from flower???…….would have likely done better right from flower😂 😂 😂 it was fun, regardless of the yield😃 Tasty rosin!!!! Can’t beat rosin for getting the true tastes of the plants. These numbers are absolutely due to my abilities with extraction.......sure don’t judge the genetics based on my returns......she is a frosty plant and will give great returns!!!👍👍 Several pictures show that, I hope!! So that will wrap up this diary for Sweet Seeds Killer Kush Auto, SWS56. Certainly give this girl some consideration if you like OG Kush and also have space concerns in your grow. She is beautiful frosty little girl with a punch. Certainly get the usual woody and citrus notes from her rosin and she has a lasting high. She helps to get get you going and willing to finally start cleaning that corner of the room you have been avoiding…….watch out though…..distractions😃……next thing you know 40 minutes go by and you are staring at a box of DVD’s wondering what happened to CD’s…….cassette tapes (the art of the “mix tape”), 8 tracks, vinyl……ALBUM COVER ART Baby!!!!!! Then its either back for another rip, or get your crap done because the next rip leads into even less work getting done😃😃 Great job as usual @Sweet_Seeds !!! Looking forward to the next one……Cream 47 photoperiod……actually, already done germination and a new diary coming👍👍…..compare a 3 gal pot to a 5 gal pot, or a fabric vs air pot, and see what my yield differences are?? Thanks for the read and greatly appreciate the comments Growmies!!!!! Love spending time on a forum for growers to help fellow growers. Much grower love and thanks again for your time, opinions, and suggestions🙏🙏🙏 Cheers!!

Hallo zusammen 🤙.

08/27/2021 Been 7 days since last pictures. Pheno #4 was eliminated do to the fact she reversed (hermied) I believe that an outside light was at fault. ( lemon Thai) genetics maybe coming through. Others have not really been affected but pheno #2,3 may have been delayed a bit but no sign of hermies just not as developed as pheno #1(Hulk). Going to mix up a flowering tea (AACT) fungal dominant. Also topdress with Gypsum, and Diatomatious Earth before tea is applied. Gypsum Gypsum is calcium sulfate (CaSO4). Refined gypsum in the anhydrite form (no water) is 29.4 percent calcium (Ca) and 23.5 percent sulfur (S). Usually, gypsum has water associated in the molecular structure (CaSO4·2H2O) and is approximately 23.3 percent Ca and 18.5 percent S (plaster of paris). Diatomatious Earth Diatomaceous earth is a mineral-based pesticide and its composition is approximately 3 percent magnesium, 5 percent sodium, 2 percent iron, 19 percent calcium and 33 percent silicon, along with several other trace minerals 08/29/2021 Posted close ups of Hulk.