Ho avuto problemi di temperatura e si sono allungate, ora ho preso il climatizzatore...

The Quebec Blues are starting to develop more now during flowering I’ll start feeding Diablo nutrients cal mag and monster frost every feeding during flowering. These plants have been growing well and just need defoliations for airflow and flowering sites. I’ve been following diablos feeding calculator 3x a week, and the plants seem to be growing well. Ph is balanced each feeding. I’ll start documenting weekly flower development starting the next week.

This week has been such a great week, as you can see compared to last week they have shot up and really spreaded out! Finally rained a good bit last night so put some feed on them and this rain will have washed it into them. Next few days need to get down and put some netting over then try get them spread out bit more before this stretch comes. When potted in ground mixed soil with some charge and bone meal so think they’ve hit some of that with the growth they’ve shown this week looking really good and hope they keep it up! Happy gorilla growing 🌱

I'm honestly out of options with these 2 because it's waaayy to hot in that garage I have no where to vent out the hot air from the box I'm gunna have to just out these outside soon its just getting to be way to much time spent and energy if anyone can help lmk thanks again! If anyone can help me turn up the speed on that mars hydro I line fan please dm me thanks!

First week went swell, germination was just fine only took 3 days, the Tricross popped leaves first the Muchacha F5 popped a day or so later. So far they are doing fine now I know what to look for and do with these autos so hopefully I'll be done in 2.5 months will keep updating as I go! BTW I am trying the Dynomyco inocculant on these ones and I will be topping and stretching when the time comes thanks again!

So I did a late top I know right? Not a perfect thing to be doing I’m allowing for another week of vegging though maybe 2. Photos this week are a bit shitty due to high pressure lighting I will try getting some better mid to late week ones though so here is the ladies this week so far

Not many pics on her as not been down too much this week and was dark and raining yesturday so couldn’t stay and take any good ones, but she’s shooting up she’s over 5ft tall now and side branches starting to come up, gonna get her tied down again to try spread her out, not long now till she will start her flower stretch, looking forward to what she produces. Happy gorilla growing🌱

Day 42 - I swapped the plant side and trained them a bit. I also did one last cleaning on the lower buds spots, which it wouldn't get enough light. Day 43 - The plants were heavily defoliated, the one on the left side more than the other. I also watered them a bit more this week.

Very beginning of week 10. She is gearing up for flower. She is stretching, but I keep pulling everything down. She has been 36 inches for a month. She is about 41 wide. 8/13 Her pot was on the dry side. Gave her 2 gallons of water. I'd say 10 percent run off. I use the ph strips. I bring water home from my job. Their water is the perfect PH according to the strips. I test her run off today. Looks like a low 6. 8/14 2 gallons of water with 8 tablespoons of fox farm Big Bloom and 1 teaspoon of recharge. I do like the foxfarm products. Some Big Bloom can make a sick plant healthy. Have to check, think she is ready to be fed. 8/16 per 2 gallons 4 ml Grow Big, 4 ml Tiger Bloom 1/2 teaspoon Open Sesame 8/18 4 Tablespoons Foxfarm Bigbloom and 1/2 teaspoon recharge. Per Gallon 1 day I will get a ph meter. First year spent enough. The plants look very healthy. Unless the strips are completely worthless, she looks to be in her happy place. She was fed very well the past week. I might do 1 more water then feed. She is forming her sites. 8/13. Makes it easy to space the sites out. Also to know what to remove. Have to force myself to cut off what's not making it. Think flower.

White hairs are growing. I see at least 10 bud sites. Had issues with thrips, but used diatomaceous earth to get rid of them.

All the photos are in the 8x8 now. just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.