Las niñas se recuperaron muy rápidamente del transplante a su nuevo macetero . se ven bastantes vigorosas y con formaciones de resina en hojas grandes , su olor (se siente bastante agradable ) ya se esta empezando a notar en el cuarto. el panel led encuentro que les gusta mucho a las plantas se notan bastantes exitadas con la penetracion de luz que emite el equipo. The girls recovered very quickly from the transplant to their new pot, they look quite vigorous and with resin formations in large leaves, their smell (feels quite pleasant) is already beginning to be noticed in the room. the led panel I find that plants really like it, they are quite excited with the penetration of light emitted by the equipment,

Eccoci arrivati al termine..amici grower missione compiuta anche con questa watermelon.ora che sia anche bella dolce e forte soprattutto 🤣😂💪✌️🕉️ boom Shiva Shankar

THE VIDEO INTRO SAYS THE 5X5 GROW TENT BUT I FUCKED UP AND IT SHOULD BE THE 8X8 GROW TENT FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Welcome to my Purple Haze Autoflower sponsored & by MSNL seed company. Well, its pretty much in the name. And I think even the most newest person to cannabis has heard of it. Like White Widow and Skunk. Its kinda a house hold name in this industry. And been what it is. I've no doubts MSNL will have made a blinder. As for achieving purple in the pheno. I find. You've to have everything going strong and no mess ups to give you a higher chance of getting purple. Even, then you may not get it. But, color of fan leafs has never really been important, nor will it ever be. I do have the temperatures to help me get purple if I want. But, asl I do so many grows at the same time. I keep an even temperature as much as I can throughout the entire crop. 19-22c atm that is. My drying room i can reach 10c at the moment. That will come up to 19c by April. (At this stage I should have my winter crop all dried) This is my last plant to start for this crop. I'm pushing it to the max this year. I've many plants. A few I plan to grow big. But 70% will be average grows which I'll be happy once they hit or go by 40g per plant. She has between 15-19% THC.. not normally a preference for myself. I like much stronger phenos. But, I had to give this strain a go. I'm getting round to the classics. As this is more or less what I grew up on as a teen. So, looking forward to tasting this baby. Edit After 30+hrs. Seed was placed on wet substrate that was soaked in 1L of Pure Zym.& Power Roots. After placing the seed i then added 0.1 of a liter of dry substrate on top of the seed. (Just moist soil) this will lower the risk of damping of completely nearly as this won't need watering for at least 10+ days. 1/5th of BatMix was added to the end of the pot with the rest been filled with Royal Mix, both are fertilised soil. But to get Alga Grow going as its an Organic product you should try get that going early. Just a small amount to kick-start the Organic process which takes longer while using Organic products. Pure zym & PR will help it break down any nutes as she's a seedling after all. So, I hope the soil won't be too hot. So, I'll hold off on any NPK feeds for now or anything else until she's into veg. Thanks to my sponsor MSNL and to all who work tiresomely to bring us fantastic strains. Also, to whomever drops by. I appreciate you. Drop a like so I can visit your diaries. Either way thanks for stopping by.

I cannot believe how bushy she is! Very very short internode length. I'm wondering if I have an indica dominant plant? 😭 But anyway, she is doing her thing this week. She only grew 9cm this week. Nutrients this time are 20-20-20 NPK powdered fertiliser I'm trying this time around. About 1.2 grams mixed with 10L of water makes ~1000ppm. My clean water alone is ~350ppm of that. I do have a CO2 bag generator thing... It's not doing a lot though. My CO2 meter reads barely over 400ppm.........

Day 149: last day of flowering Day 150 (01 October 2021): End! Now the Harvest begins

Week one, starting to see leaves

Seit dieser Woche bekommen die Pflanzen nur noch Wasser zu trinken. In der Box herscht ein unglaublicher Geruch, kann die kaum noch auf machen. Es geht dem ende zu und ich finde die Mädels könne sich doch für den ersten Indoor run wirklich sehen lassen oder? *eigener Schulter klopfer*

📆 Semana 5: La planta sigue con su ritmo firme y constante. Los cogollos siguen engordando, ahora con más densidad y compactación. La resina se vuelve aún más abundante, cubriendo prácticamente toda la parte superior y algunas hojas vecinas. El aroma se intensifica y se vuelve más complejo, con notas dulces y un toque terroso que empieza a destacar. La planta mantiene un consumo estable y adecuado de agua y nutrientes, sin mostrar estrés ni señales negativas. La estructura aguanta bien el peso, gracias a una ramificación sólida y entrenudos aún cortos para lo que suele ser una auto XL. La floración sigue en pleno apogeo, y se ve que la calidad apunta alto. Todo sigue marchando como debe, y la cosecha promete ser muy buena. ¡Seguimos creciendo fuerte 💪!

Full on flower mode. Stacking nicely 🙏🏾

Starting to flower so I put out the trellis net Feeding of Gia Greens General Purpose and Flowering Power Bloom

16 august 2022 Given the way the plant is growing, I am a bit overwhelmed. It has two definite layers. Top layer has like 9 main nodes. Bottom layer has many many smaller nodes. But they are evenly distributed and have all the same height. From the base of the plant to the 2nd layer, I have removed all of the leaves. But I really have no idea if I should removed all of the second layer in order to really keep only the ~9 biggest nodes. Oh, let's wait, I guess.

Hay Mates, sorry for my very late update - here i am again, with a huge diarie rounding off. i will fullfill some months since the 13 Week of Grow by giving you much photos and clips. - Well i think it is not needed to talk to much about Condition changes within the last Weeks, because we are talking about a potless Outdoor Grow, where the Conditions could be change day for day, things like pH value couldnt be accuracy. Thats my thinking. - Like i previously said: I've worked with LST and HST to try to increase the vitality and hold them "small". So lets go ! - Best Wishes Organically » tried and true, since simple is the best !

5000 ml jeden 3 Tag in der Zehnten Woche pH-Wert: 6,3 EC-Wert: 1.4 mS/cm Temperatur: 30ºC Luftfeuchtigkeit: 50% Schädlingsbekämpfung: im Moment haben wir keine Anzeichen das es was zu bekämpfen wir haben aber Raubmilben ins spiel gebracht zur vorsorge gegen Spinnmilben und andere Schädlinge 😉💪 Düngemittel: Brenneseljauche self made hat einen EC wert von ca 1.6 und etwas PH up von Biobizz Besonderheiten: Sie wurde nun in den Outdoor Bereich gesetzt und wartet auf das umtopfen. -Tag 64 heute haben wir ihr wieder Wasser mit Jauche gegeben und wir haben den PH wert etwas nach oben verschoben in dem wir PH-Up von Biobizz dazu gegeben haben. sie bildet immer schönere und dichtere Buds. Sieht sehr gut aus und so langsam steigt auch ihr Duft in die Nase 😍 -Tag 66 nicht viel mehr zu sagen heute, sie legt schön an dichte zu und Geruch. -Tag 68 heute haben wir ihr wieder Wasser gegeben 👍 -Tag 70 heute wieder Wasser gegeben und Blüten Kontrolliert, ob sich irgendwo Pollensäcke bilden. Man weiß ja nie was da kommt 😜

Day 50 from reciving my seeds and equipment and day 46 since I put her into Coco: 25/Oct/2018: She is doing so well and is in her first week of flowering! I saw massive differences and a boost in her budding thanks to Canna PK 13/14 and for those that suggested I start using it (I started at 0.5ml per L, 3 days ago). Her roots seem to be doing very well (I see fuzz of healthy fungus and microbes on the roots when they sprout out of the fabric pot! Please send any suggestions on my use of nutrients!

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.