The Grow Awards 2026 🏆
Likes
Comments
Share
⛺️ MARSHYDRO 💡VIPARSPECTRA 🍼GREENHOUSE FEEDING BIO GROW 🌱 WEEDSEEDEXPRESS
Likes
36
Share
So we are starting week 5 of flowering , so far so good she's done her stretch and now shes thickening up the flowers ! We had run into a nitrogen and potassium deficiency but thats been fixed ! As for this week we are just going to take it easy and let the plant ride its course ! A big thank you goes out to everyone who stops in weekly to check out the diaries !! You guys rock keep on keeping on ! -Happy Growing!
Likes
14
Share
ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
23
Share
Sie wächst jetzt unheimlich schnell und lässt sich schön trainieren ! Also fatsbuds mir advance und plagron ist einfach brutal 😍😍
Likes
11
Share
@Mo_Powers
Follow
another week has passed and it is growing and thriving excellently. there has been a lot of sunshine and occasionally the necessary rain from above. no pistols to be seen yet
Likes
92
Share
Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
10
Share
@Froggman
Follow
I’m still not sure about the FIM job on the LSD, and the purple haze is looking a bit runtish, but we’ll see how they go. I cut some leaves on the PH today to give the bud sites beneath them more light. All in all, they are doing well I think.
Processing
Likes
Comments
Share
Day 53 - More stretch .1 liter . 2 ml Cal Mag + 1 ml Iguana grow +2 ml Iguana Bloom
Processing
Likes
37
Share
welcome to Day 29 15/1/21 she has grown so much in 1 week and that makes me happy as she was quite small. I have done light trimming of the lower leaves and toped up the res with the addition of flower nutes. that's all for this week happy growing and as always keep your stick on the ice
Likes
37
Share
@Capo420
Follow
Another Great Week Down! The ladies are looking great, these Orange Sherbets are a little ahead of the Six Shooters The stretch is REAL. Hahaha Everything going fairly smooth besides not being able to get this pH down a little. I have burned their tips a few time trying to flush with a high ppm low pH solution. Everything else seems to be in order though. Happy Growing! 🤙💚💪🌱😎🌱💪💚🤙
Likes
19
Share
This week she was a warrior... a few days with wind gusts up to 70 km/h 🙌👏💪
Likes
13
Share
So the tall royal gorilla( second from the left in the back. that, to me , looks like it has horrible genetics or it just couldn't handle the stress of topping and the burn. It's still gunna produce well just. Scrawny. My critical thunder from msnl is shorttttttt love it for an Afghan cross. And the most green. And full. Lots of calyxes are forming finally. I removed the, now clear , male from the tent and I did something...... Well white trash ( no pun intended) . In my eyes. But in a ingenuity kind of way. I got a cheap ass rolling trashcan meant for outdoors. Like 20$. I already had an extra. So I put the male in it and it fit perfectly. Cut off everything from the plant except the top of the two main stalks. It fits perfectly. I put a old light I used to use for seedlings in the top. And threw a light blanket over it. . I have it on the other side of the house. . Check the video. It's actually kinda cool 😂 Also feeding their flowering nutes next week. In SMALL amounts. I did add bud honey. Which does the same as just good molasses but better. This soil has a lot of micros and macros that'll love it. But the rest of the girls are going fine and I'll be starting a new diary for be on the look out 😎
Likes
8
Share
@GrowerOG
Follow
Hello everybody, the pictures show a split situation: the buds looks good but the rest of the plant scream to overfeeding. Infact at the third day of the week i find an extra water in the saucer so i control the EC and i see 3.5 mS/cm. This value is clearly too high and i try to recover the plants by watering everyday with 1 L demineralized water adjust with pH-down. I just hope to see a better situation in a week. 🙏
Processing
Likes
14
Share
OMG too, I have been keeping my go pro doing time lapse photos in the tent, I made a video with first 26days in 3 minutes Check it out! Wow, growth is beginning to light a fire in my gut, feels good man! Although, I'm starting to get curious about plant #3. For the past few days, this girl (3), has been not growing in girth or height. Although she seems fuller and healthier.. Gonna wait her out! OH Another thing, A great big SHOUT OUT to Sacred Geometry and Astarte for giving me great advice on my stem issue with plant 2. I went ahead and chose SG's for my answer simply because I felt topping the pot was the right call. Oh but be aware, that my plant heights all went down due to topping off the pots with more soil... But I feel more comfortable about that plant now. Also I heeded SG's advice on Fox Farm Nutrients and halved the recommendations this week. All right, on to my daily log entries. These can all be found in the pics above, but I feel like it makes my comments more beefy.... 12/17 Humidifier ran out of H2O, trimmed first leaves & suckers off Plant 3. I know she's little but I hate her having to work harder for those terrible nutrient suckin leaves 12/18 Rinsed all plants w/ PH Balanced H2O & watered lightly around stem. Sat Back and enjoyed growth. Man, 4 is kick ass! Put in CO2 cannisteter @6:07P 12/19 Trimmed last two weird leaves off plant 3, only left 2 pairs up top hopefully enough... just wanted to get it focused. Topped $4 too, left 3 nodes 12/20 Fed w/ 1.5 tsp/ga Big Bloom / Big Grow, 1/8 tsp/ ga Clean Kelp topped pots w/Dirt (SO SG!) so heights went down Did not top #3's pot too short. Rinsed plants w/ PH Balanced H2O TDS @ 1154 PPM PH out 4.35. 12/21 Topped plant 1, removed bad leaves, P2 pinched baby suckers. (I realize now I'm not really topping, I'm more just trimming suckers) 12/22 CO2 juices on P1 leaves caused almost holes thru it Dropped light to 19 1/2" f/ #3 12/23 Measured plants, shook up CO2 cannister #4 Power Growth! #3 seems to be fuller but no measurement changes! Well there ya have it folks, thanks for stopping by and saying hey I do appreciate it!! Cya Next Wednesday! edit: I just watched video again and realized the two little dots on screen everyday are power lights on plugs breaking out electrical tape now!
Likes
9
Share
A great plant to grow. Looking forward to testing her out.