Additional 8cm this week I think my setup can handle 8 more, anyway I am happy with the grow. Have a nice day.

1st week flowering. Defoliation and scrog

Day 40-47 (May 31st- June 7th) (Day 41) For the first time in this grow these plants are looking halfway decent. Smell is ramping up too. I finally feel optimistic about this grow. (Day 42) The two jacks and the chunky blueberry are showing early signs of N/Mg deficiencies. I know it’s late in flower but since I’m experimenting with this tent, I’m going to give them one final feeding of nature’s pride 2-5-5.5 (tbsp) along with a teaspoon of oyster shell flour and some rock dust. Everything else I’m going to give a teaspoon of rock dust and oyster shell. There is no way these amendments will fully break down in time to be used by the plant but they could at least use the pH buffering and trace amounts of minerals after their recent leach. Everything but the BAOGC is covered in pistils that don’t really match their bud size. I hope they fill into their pistils because an over abundance of hairs drops the bag appeal like crazy. Over the last few cycles, indoor and outdoor, I’ve definitely learned that different strains and phenotypes mature at different times. Sometimes really radically too. (Day 43) None of the plants are fading at all but they’re still looking good. Black garlic I know should be fading but remains dark green and toxed. I popped a developing seed out of the main bud too. I wonder if that blueberry herm branch pollinated it at all. It seems like plants don’t really like that Destiny dark matter soil by itself. I find it works better mixed with coco or promix 1:1. (Day 44) I’m starting to think I might be mixing up the TWOG and BAOGC. BAOGC took forever to fatten up last round and the 2 phenos I suspected already look done. I was thrown off by the similar terps. The beauty phenos are definitely TWOG (Day 45) God these Jack Herer’s smell good. Nothing but fruity funk. Almost like a vanilla or blueberry yogurt. I would say this stuff has the most overpowering smell in the tent now. I’ve noticed they’re starting to foxtail like crazy. Blueberry#1 too. I’m watering a final low strength feeding of seaweed extract on everything. (Day 47) Everything really fattened up this week. Even at the beginning of the week I was saying I didn’t think they would fill out. Jack Herer and BAOGC specifically made some big gains and nearly doubled their density and still have quite a way to go on them too! The smell has ramped up and finally, everything is looking happy and healthy.

✅WEEK NOTES: 20/01 LIGHTS OFF! Some days in the dark and cold box are great to increase flavors and potency ✅ 🌱GERMINATION🌱 01/10/2023 SEED IN THE SOIL 03/10/2023 🔝 10th NOVEMBER 1st FLOWERING DAY🔝 🔝 10° FLOWERING WEEK🔝 📅20/01/2023 LIGHTS OFF 📅 💡💡💡Viparspectra xs2000 at 75% Power + QUANTUM BOARD AT 75% POWER💡💡💡 💉🔍Fertilization schedule:🔍💉 ONLY PLAIN WATER 🧐 🤓 WHITE WIDOW DATA SHEET 🧐 🤓 Strain Type: Feminized THC: 19% CBD: Low Yield Indoor : 450 - 500 gr/m2 Yield Outdoor: 550 - 600 gr/plant Height Indoor: 60 - 100 cm Height Outdoor: 150 - 190 cm Flowering time: 8 - 10 weeks Harvest Month: Early October Genetic Background: White Widow S1 Type: Sativa 50% Indica 50% Effect: Powerful , Stoned Climate: Long Summers Flavor: Earthy, Pepper, Pine 💸💸💸💸💸 Buy WHITE WIDOW FEMINIZED BY RQS: https://www.royalqueenseeds.com/feminized-cannabis-seeds/122-white-widow.html _____________________________________________________________________ 🔧💡OUR SET UP FOR THIS GROW CYCLE💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was incredibly fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com 💣Quantum board - 480w - 4x120w Boards Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA 💊💉💊ROYAL QUEEN SEEDS FEEDINGS ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

Curing was a pleasure, it's very rewarding to smoke your own stuff. I'm getting excited for next grow

Good week of fattening up and the last week of feeding done she’s getting a flush for the next week and cropping on Boxing Day . An absolute dream to grow , she’s handled temps well above 35c not one drama the entire grow . I’ve been smoking this flat out the last week and it’s a top smoke , full berry taste and an almighty stone that last for ages , best thing is there’s about a pound of it to smoke . Merry Christmas to me

My homework. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration.Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems.

Floracion (Tiempo estimado 64 dias) Quinta Semana de Floracion 05/02/2024 - 5:00hrs y 22hrs: Se hace cambio de solucion nutritiva, con parametros ajustados a la semana, Se hace Lavado de cubetas, tuberias, bomba, humificador, y perifericos, Se realiza limpieza completa del indoor, Se verifican parámetros básicos del agua, mantener cuidados específicos, el olor es mas penetrante pero gracias al filtro de carbono se mantiene fuera del indoor sin aroma, empiezan a observarse mas el crecimiento de los Cogollos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 06/02/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 07/02/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 08/02/2024 - 5:00hrs y 22hrs: Realize por la mañana riego foliar con agua de osmosis sobre toda la planta, quedo empapada, al iniciar el ciclo de luz y verificar la planta se noto lama dentro del recipiente de la solucion y canastilla hidroponica por arriba y abajo de ella, La unica accion que realize fue quitar la malla de guia para que subieran los tallos y no se contaminaran, Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 09/02/2024 - 5:00hrs y 22hrs: Se realizo limpieza de la mold en el cubo hidroponico, acomode los aspersores de modo que el chorro de agua diera al mold, cambie la bomba de oxigeno, se nota un cambio por la tarde considerable, Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 10/02/2024 - 5:00hrs y 22hrs: Se observa mejoria considerable en las raices y el cubo hidroponico, Se limpia el prefiltro del extractor de 8 pulgadas, Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 11/02/2024 - 5:00hrs y 22hrs: Se nota una mejora considerable en la raiz y en el cubo de reserva, Parece haber desaparecido el moho, Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 950-1200, Ec 1.9-2.3, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 65%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad.

Felt like growing was slow going this week. I know they’re only 7 days from breaking ground so they’re establishing their roots but there was two days I felt like they didn’t grow at all. I germinated two more seeds, was going to have a total of 5 in my 4x4 but I somehow managed to kill both my master kush seeds despite having a beautiful tap root when I planted them into the soil. (Any advice/methods for getting seedlings going from germination to 🌱 is welcome and appreciated) My two Gorilla Breath plants struggled for the last 3 days of this week and went pretty yellow, which I presumed was a lack of nutrients since they’re only in solo cups right now with Fox Farm soil. They most likely used up all those nutrients and thus began showing signs of nutrient deficiency. I plan to make the next transplant into pro mix with added perlite so I have Advanced Nutrients Micro, Grow, Bloom on standby with RO water for that process. I ended up giving the two gorilla breath a 1/3 dose of micro, grow, bloom in 1L of water for one of their feedings to attempt to get some color back. It seemed to start working as you can see on the pictures. I was into my local hydro store today to buy some perlite to add to my pro mix next week and the guy talked me into some foliar spray (see attached image) to address the nutrient deficiency. I sprayed it on the leaves right before lights out on day 7 (February 6th) Hopefully that helps them out. Time will tell. I also struggled with humidity this week, ended up using a wet towel temporarily to keep humidity levels around 50% but I ended up ordering a humidifier on amazon and got that set up today. Super happy with the results from that 😁 Stay blessed and happy growing!

I've been letting her grow. She reached the highest point under the lamp inside the tent which was 110cm, I'm hoping her flowering boots up and she has enough daylight everyday to create energy. I use Bloom as the PK Feeding nutrient. I have to water her EVERYDAY btw it's strange how dry her dirt becomes during the day and over night,. Water and PK And 10-14 daylight. Water at 6.5ph

Omg... OMG.... O MY GOD MASSIVE litteraly massive size plants. You think they done getting taller and your wrong. I super cropped 1 branch cause was over the light, then the next few days 4 more shoots take off to the light few inches off the light to be exact! So lets see what happens with this light at 100% with buds that close if will bleach or what... if they grow past will prolly have to super cropp. But that is just 1 that is a damn tree the other 2 are about the same both medium tall height and have started to put on a resin coat already even down to the lower buds. Witb the help of a little defoliation i did to get more light down in the canopy!! Still same canna nutrients at the heavy side at ph of 5.6-5.7 about 3 L every 2 days. Have dropped off the rhy and picked up more everything else no pk yet. Love

28/10/25 Nutrients change today ( a day early ) because i didnt like how she smelt, so flushes, filled hit with 400ml sleeps then flushed, refilled and nutrients Floramax veg 1 Floramax Rezin plus Floramax flowering enhancer Floramax Organabud Green Planet vitathrive Isn cal mag Green planet massive bloom Green planet bud booster ( 30ml scoops x 4 ) Cyco platinum series silica Sleeps with the fishez ( HOCI ) Hit 4.8 e.c, changed 100L got 2.3-2.4e.c, 6.1ph. Used a lot but wanted to get rid of the Green planet line plus the ISN cal mag as im switching out to sensi cal mag Week 3 here we go! 29/10/2025 Light defoilation trying to use the scrogg net as much as possible to get as much light in as i can

week intel: its time to harvest top buds! because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. its crucial to get uniformed buds in terms of quality that you let the lower buds to get some extra air and especially light! then the pop corn buds quality will reach the top buds. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.

I wished that I could've done things a little different but the end result was fiiire! Taste like Peaches when you give it a nice 4 week cure. Wish that I could've yielded more. But experience will overcome all my flaws. But it will only get better.

Welcome back 🤗 Another week has passed and I’ve started adding a small amount of Grow nutrients to the mix🌱 Cranking up the light a bit again this week trying to maintain about 400PPFD. See you next week 😎🤙🏻💚 ------------------------------------------------------------------------------------------ Light source: Medicgrow SpectrumX 880W LED Build in PPFD 4 controllable spectrums V1, F1, VS, FS Visit https://medicgrow.com/ for more informaton. Light measurement: Apogee MQ-610 & Apogee DLI-600. Fertiliser: Organics Nutrients https://www.organicsnutrients.com/en/ Green Buzz Nutrients Discount Code: GD42025 Grants 25% with a minimum Order value at 75 Euro. https://greenbuzzliquids.com/en/shop/

Un verdadero pastel, es una variedad con un excelente aroma, con notas bien marcadas a un dulzor que te vuela la cabeza, excelente apariencia de las flores, se ven realmente compactas y cubiertas de resina que te volara la cabeza!

3 settimana inoltrata

Vamos familia, como me gusta todo lo que provenga gelato, no sé porque pero me vuelve loco ese sabor y ese high tan bestial. Pues aquí va otra semana de las gelato olandese de dutchfem seeds , y ahora si que van con buen ritmo ,tienen un color y un vigor increíble una que no tenia mucha vegetación al final saco un par de laterales monumentales. Veremos cómo van progresando de mientras. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Bueno las maximas de temperatura no superan los 25 grados y las mínimas no bajan 19, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/60% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo poco más la verdad ya con ganas de empezar la floración , buenos humos 💨💨💨

Welcome back to the conclusion of the Lemons! Day 56 from seed on the dot and these two girls came down, which is crazy fast! I had originally planned to let these girls run for another week, but the stem snapping on LP#2 put an end to that as she wasn't recovering well by the next day and I thought better to harvest now. The trichomes are in a good spot anyway, so I don't feel like I've lost out at all. The wet weight is good, but massively inflated due to the stems, so I expect to lose at least 75% of that, but I still think these girls yielded reasonably well. I like to dry in 2 stages in order to slow down that initial dry as the humidity is naturally quite low here. By leaving the stems and most of the leaves until Stage 2 I can control my dry time a little better. I leave the buds on the stems until they go into jars. There's no hard rule to how long I leave between stage 1 and 2, it depends entirely on how a particular dry is going and I judge it as it goes. Dry took 6 days total, trimmed large leaves at day 3, the rest at day 6.

All 3 plants are different, the one at the back is as big as the other two. One of the plants in the front is in a 9 liter airpot and developing quicker than the other two. Also the buds are looking a bit different, very white on the bluecheese in the back. This week I also started adding Acti-Vera and Bio-Heaven, hopefully they like it. Not noticing anything unusual and I am glad I have the extra 20 cm to grow in hight in the new tent. Day 46, switched to bigger lights SF-G3000, fits perfect in a 70x70 😇 Light at 60%, 40 CM from top.