Buds Buds Buds 😍

🍀

had to flip because of the critical already started flowering somehow

Unfortunately I had to harvest early due to personal reasons. I am proud of my harvest though. The buds could have gone another week but that’s fine. The trichomes were to my liking. They’ve been drying for about 5 days now. All in all it was a pretty easy grow, just water every couple days and top dress every 3 to 4 weeks. I did make some very potent canabutter from the trim 😋

Start of week 3 of flowering. This GG#4 girl is hungry! She's needing more feeding each week, now up to 6 liters per feeding. Bud sites are developing nicely, added B52 to the feed this week too. She's yellowed more than her sisters over the course of the week, hopefully the extra feed will stop that from spreading further.

This was a fun plant to grow. The trichome production was amazing and the last couple weeks she really packed on the weight. The trichomes changed from clear to milky to amber a lot quicker than I anticipated. However I had started my flush 2 weeks prior so everything seems to be top notch. I water cured a small amount and the high is GREAT!

Did another light defol, top dressed with 284,wc’s, and build a flower. I removed the trellis because I didn’t like not being able to move the girls around so I hope the silica does what it’s supposed to. The buds are starting to thicken up so stay tuned 🤞🏾

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 End is arrived, let's go for harvest 💜✂️✂️🏁 💧 No Water 💡Mars Hydro - FC 3000 50% 26 cm Mars Hydro Fan kit Setting 9 Have a good week and see you next week for the harvest ✂️👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Tropicana Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/tropicana-cookies-fast-flowering

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 11/27/21 😻 Week 8 is here friends!! We noticed some bleaching this week on a few of the higher tops and decided to move the MarsHydro again, from 18"to 20" this time..We underestimated how powerful this light actually is.. We no longer have access to a functioning PAR meter so we're relying exclusively on plant response, Google and some guess work to dial ...High light intensity definitely explains why we've been feeding these autos so much lol.. I'm glad we caught this when we did. We gave all plants another moderate feeding after moving the light (still waiting on a calmag re-up) , but I think they'll be just fine 😺👌.. we're hoping that 20" in flower might be the sweet spot..We truly have an autoflower curse, its real, anything that can go wrong typically does lol but it should be smooth sailing from here on out..thanks for reading if you made it this far and happy harvests everyone! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Incredible buds on these girls and super dense strawberry gorilla.Smell is unbelievable strong and it’s like a little slice of heaven inside the tent.Will harvest these two girls together.

Buds bit squishy but covered with enough crystals had to harvest due to mould and to much died leaves had few smokes and it hits straight away nice smoth smoke with orange and almond taste. Damn im so hungry now! Happy growing people!

1/14: This morning, I did a foliar application of big bloom and fulvic acid, then about 5 hours later I watered them with about a half-gallon of rainwater each and added armor si, humic acid, endoboost myco/tricho, liquid molasses, and a bunch of cal-mag. Today, I also I wired up and mounted my new samsung sun board strips (660nm/730nm) and my Solacure FlowerPower UVB fixture. I'm running the deep red/far red bud boosters a few hours per day right now, but will run them for the entire photoperiod once I start flowering them. I'll run the UVB for 4 * 15-minute sessions a day for the full flowering cycle, and if they don't protest too much I'll increase each session by 5 minutes and evaluate again. Some strains are more forgiving than others and I've got 5 different strains in this space...so really not sure much time I'll get away with exposing them to the deadly rays without damaging them too much...😈 Both "A" and "B" put on an inch overnight. Now that the soooperstunted mutant runt is acting like a normal plant, so henceforth I'll refer to her as "C." 1/15: I received one of the rapid led/growmau far red initiator pucks today. With the placement of my UVB light, I'm realizing I'll need another far red puck to have even and intense far red coverage, so I'm ordering another with Prime delivery and waiting to start flowering until I receive it. I sprayed them down really well with ph adjusted rainwater tonight to rinse off nutrient build-up from foliar applications. 1/16: I'm really excited to try flowering under 14/10. I grew photos indoors on an off for 15 years before I semi-retired. If I added up all the additional flowering time I could have done through the years if LED technology existed, I'd have had an extra truckload of bud to smoke. I did another application of Axiom Harpin a|b Proteins this evening, right before dark. I'm expecting a big growth burst this week, leading up to the flower stretch. I really need them to trigger under 14/10 within 4 or 5 days🙏 ...if not, I'll switch to 13/11 and wait a few more days🙏😟..if still no pistils are poppin, I'll go to 12/12 and chalk it up as bad luck or varietal indifference to Pr and Pfr manipulation. 1/17: I fed each of them about 3/4 gallon of full strength veg nutes. This will be the last. I'll go with half-strength veg and half-strength bloom for a week, then go with full strength bloom nutrients until I start flushing them in 6-8 weeks. 1/18: I installed the second far-red flowering initiator today and got all my timers configured for flowering: ========================================= timer#1 - power strip with qb's and red boosters 10:00am -12:00am timer#2 - (dual/independent setting) sideA- 3-way cube with uva bars 10am - 3pm 7pm - 11pm sideB- flowerpower uvb 1pm - 1:15pm 4pm - 4:15pm 7pm - 7:15pm 11pm - 11:15pm timer#3 - far red pucks 11:00pm - 12:15am timer#4 - sub-canopy tube 10am - 1pm 3pm - 6pm 8pm - 11pm ======================================== I also did some testing on the timers and sealed myself into the closet to check for any light leaks. All good.👌 1/19: Tonight is their first long night. It's ON!👍 I moved #3 into the tent with my DWC rig to veg a little longer. 1/20: I watered them today with about a half gallon each. I'm seeing calcium and magnesium deficiences here and there, so added some boomerang and heavy cal-mag-Fe along with liquid molasses, humic acid, and endoboost myco. I also foliar fed with big bloom and fulvic acid. #3 is still vegging in my SCROG tent with the #8 FFT DWC plant. She's coming along, but still not ready for prime time.. That's it for week 4-

🌱✨ Hey friends, check out these gorgeous bushes! 🎉🍀 At just 8 weeks old, they’re already looking absolutely stunning 🌟💚. Our girls are thriving, feeling their best 💪🌞, and getting ready to bloom 🌸🔥. We’re working hard to tilt them 🌿🔄 and grow them horizontally 🌱✨ so that every single bud 🌸💎 can soak up as much sunlight ☀️ as possible during the flowering period. This strategy ensures even growth and helps maximize their potential! 🚀🍃 It’s going to be a beautiful sight 🌟, and we can’t wait to see them in full bloom. 🌸🌞 Keep following along for more updates—you won’t want to miss the magic! 👀📔👊💚✨

colas growing in tremendous amounts, she is happy 😃

Potted then up to 4ltr pots ready for flowering ✌️ switched to 12/12 on day 35

Day 21: So we are currently in day 21, I finished all my work for my growroom. They where pushed into flowering 5 days ago. They always need to settle first before even turning into that stage. So my gues that in the end of the next week we will start to see the first indicators. I still gave them veg nutrients this week since they are still in growing stage. I did notice that many plants have weak stems and where sloppy underneeth. Didn't liked that, so in order to have thicker stems and branches I decided to top all the plants ( not showing in these picutues, i did that after making the pictures) Topping your plants will create stronger thick stems and branches! Also removed the first 1-2 internodes on each branch. I kept 5 or 7 branches each plant. I can't remember the ''science'' behind it but I have been told that many years ago by fellow OG Dutch growers and Family members. Anyway It is importend to have uneven branches. So 5, 7 or even 9 but never 6 or 8. Normaly I would have loved a huge main cola and it is known by many amnesia growers to not top the plants because they make beautifull thick main colas. On the other hand, when having this much plants on each m2, it will create weak stems and branches. I rather have strong plants with thick stems and branches to transport all nutrients properly and not breaking when having buds on them or having to mayor support them. The leafs, stems and branches look fine to me. No stress or deficiencies. 1/3 of them like to drink thought which is a good thing but it really enjoying. Now I have to weigh by lifting the pots which one needs more or less feedings lol. Instead of giving them all like 5 seconds of water. Might show you guys my feeding ''barrel'' next week. It is a 250L one. Untill next week.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hey everyone 😁. Not much has happened this week :-). Last week's pump failure delayed the whole thing for a few days 😅. As the lower leaves are now starting to turn yellow, they should show their first roots in the next few days 😊. The water was completely exchanged again because the EC value has risen again. The small cups were sprayed every day so that the air humidity remained in the upper area. Otherwise everything was cleaned and the pumps, heating rod, etc. checked for their function. I hope you have a lot of fun with the update. Stay healthy and let it grow 🍀🙏🏻 You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧