Girls feed has been increased to max for outdoor in the ground grows. 1500 ppm 3.0 ec and their all doing fine. The Gelato K is getting huge. Going to tie string to every big branch to keep them from breaking. Very long branches and very heavy just with the leaves. No branches have snapped yet, just waiting on string coming today. Bring the branches back up frrom their bent down positions. Crowding out the branches underneath. Thanks to all the looks and likes. Thanks to Kannabia for some fine seeds.

Buds starting to pop out of the lower nodes. Lots of new pistals have formed this week, feeling for room where the buds will eventually fill out. Will get her out for some photos in natural lighting next week when the buds are more mature.

I've started giving just water, also moved them to a smaller tent as the other one is now 12/12. They have stayed too face really fast so could have gone longer but there starting to look cloudy so I'm happy to feed water for about a week then harvest them. One of them has a distinctively different smell to the other 2. Both types smell great though.

Added some nutes. TPS one is great!

Week 8 of Flowering, pistils are turning brown. Will check tricolms next week. Since I am doing hydro, flushing can commence the final week. *finally got my co2 meter to work so boosting co2 to 1000 ppm and increased light output but 20%. The rent increased 30% in humidity and raised 4 degrees F so manageable for sure. Happy growing BM 4TweentY

These lady's have real good except error on my part with one that ended up herming out but got it out tent before it could do anything but rest have since to gotten way better and are filling out nicely and my mania she still the best looking ggxww I got initially got about a week left before the ready to be chopped down have been flushing for almost two weeks ph has been at 6.5

She looks awesome at the beginning of week 8. Queen Papaya II fills up my hole 60x60 tent and she is growing lovely buds... Let's see how this works out 😍I just cut some leaves and gave her some nurition (2ml one a week from each of the three).

Started flowering around week 5. Lowered the humidity to 50-55 with my controller. Noticed one of the plants topped itself naturally.

For 6 plants I got 415 grams which is so far, again my most yield to date. I think the light is deffo a factor plus the genetics help. It says it has up to 27% THC, it was deffo one of my favourites and I think I’ll be growing this again in the future. I’m terrible of explaining the smell and taste but it was really danky and a lot of my mates loved it.

Quedan 2 riegos con producto y comienza el lavado de raices. Pinta muy bien la cosa.

ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 https://strivenutrients.com/ Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

The weather's finally starting to warm up. It feels so good to have the sun out and to open the windows. With all this extra sunshine, my pound cake plant is really taking off! It's growing so fast, and it's starting to look really full and healthy. I can almost see tiny buds on the ends of the branches - maybe it'll even have flowers soon!

4/1/2023 Week 7- Day 1 of Veg (Day 59 overall) Water Change Day!!! Water was really low it was just above the hump in the Res cutting it close to not having enough water in the system to keep it going. They drank a lot making it close going the full 14 days. I am still going with the previous grows and adding 36 Gallons but even looking at the root I think the SILICA is working and the roots are further along at this point than in previous grows. This next two weeks will watch how much they drink and how low my Res starts getting, and will make a decision on changing the water weekly from here on out or still keep on the plan of every other week until Week 4 of Flower. Added 36 Gallons Mammoth SILICA= .5Mil/Gal = 18Mil CALMAG= .5Mil/Gal = 18Mil Root Drip= 1Mil/Gal = 36Mil FloraMicro = 5.4Mil/Gal = 194Mil FloraGrow = 4.2Mil/Gal = 151Mil FloraBloom = 4.6Mil/Gal = 166Mil ORCA = .5Mil/Gal =18Mil PPM= 536 PH=5.84 PPFD=500 Tent Temp= 76.5 Water Temp= 71.4 Humidity= 58% 4/2/2023 Week 7- Day 2 of Veg (Day 60 overall) Not much today, PH was at 5.81, I brought that back up to 5.90. I took care of some badly needed defoliation in each of the back sides .. I was able to see some really good clone material to use on the lower backside of each of the plants. I will be taking two clones from each to breed over the next few weeks depending on when I am going to flip them. 4/3/2023 Week 7- Day 3 of Veg (Day 61 overall) A little FIMing, A little Topping, and a Little bit of defoliation. Might have to take my clones during the week this week, I am trying to wait until Saturday to hit week 8 but again they are getting all over the place and I need to trim some of the sides and lower areas. 4/4/2023 Week 7- Day 4 of Veg (Day 62 overall) I decided to take my clones and clean up the lower half of the plants. I took 2 clones from each plant to go into the cloning machine. 4/5/2023 Week 7- Day 5 of Veg (Day 63 overall) Water Temp is sitting at 73. Right in my ideal range for my setup. Ideal range 70-74 My Temp Tent is my ideal zone75.6 Ideal for this grow 70-78 The lights are still waiting the switch to flower to get maxed out... The Humidity is coming in right at 60% I love it.. I took so much off yesterday I figure it was a good day to let them rest. 4/6/2023 Week 7- Day 6 of Veg (Day 64 overall) I needed to Defoliate some and I topped a little. The plants might force me to flip them soon. Next Wed is the 10 week mark half way through the 20 weeks. The net is Bingo... Which means that If/when the plants hit the net I will have to flip them. The Net is set to the max height that I can let them get based on the Breeders Stretch report 75%. 4/7/2023 Week 7- Day 7 of Veg (Day 65 overall) #3 is 22 inches Tall, #2 is 19 Inches Tall. Net is set at 24 inches. Net is also set as my Bingo point, if they hit the net then I have to flip no matter what to account for the Breeders recommended 75% Stretch allowance. I think I am going to have to flip right at the 10 week mark of the Competition which is Wed 12 Apr. I topped a little, I de-foliated a lot to start getting it ready for the anticipated Flip.

Despite very low RH the Scroggernaut continues on its path. Transpiration is a big problem with RH topping out at only 20% Looks like this week will bring positive temps and better ambient RH. Thanks for looking

Week 5 Flower Stacking Watered in at 800ml Individual Recharge day. Epsom Salt 1tbs to 4l - bought at the local pharmacy.

This past week I was out of town. However, I set up an auto watering system for two girls and one lived off the auto pot. Seedling 1 - Largest in clear container Seedling 2 - Autopot Seedling 3 - The “Late Arriver” I monitored the process and tent while away and was not let down. Came home to the nutrients finally being delivered, so the girls received fresh water with a first dose of “minerals and food.” I’m just stoked they survived in my absence!

Alright guys, now we're up to date I didn't write that much before because I wanted to get here first. Actual date Feb 10th They're looking good No nutrient burnt so far 24/0 Schedule Watering every 2 days but continue to spray on them like 2 liters everyday to increase humidity lvl to optimal condition Temp is OK Wish it was better but have to repair A/C Anyways bout the girl This gorilla girl XL is slow but developing good, taking her time to grow while it's fully LST, she's redirecting her energy to the other stems and leaves plus main trunk and slowly continues to grow its main stem We're already on 1900PPM We've been giving nutes from the very beginning plus bloom to make sure she gets loaded, but certainly lil bit not to mess up too much with her so we already on 1300ppm bloom stuff 😏 Want to get big yield let's see if we as much as we want

These girls are super sticky! Resin is building up all over the place, including the leaves. I've been defoliating like crazy but they just keep coming back.

Been another smooth week. A few of the plants are starting to show signs that they are moving towards to finish line. Seeing some swelling, pistils starting to brown, and some beautiful purples coming out in some of the buds. Been debating on giving them a dose of dry koolbloom, but I will probably just keep them running on the maxibloom until flush since they look pretty happy. This slurricane is busting with sweet fruity aromas. Not going to be the best yield but I'm sure she will pack a nice punch.