You walk into the back yard and it’s a straight face punch of smells. Looking like some indoor rn moved all plants to safer place in case storm hits so now I atleast have a wind break

Now all plants are fully blooming and producing buds. The two plants on the back are really difficult for me to reach, so they'll have more leaves as I can't trim em. Especially the rigt back corner one, it's way bushier.

I transplanted her into her final home so now we just wait for her to grow a little more then I imagine she will start flowering like her sisters in the room ! So far I'm impressed with this plant shes doing really well I'm excited to see her grow up some more ! A big thanks goes out to all the peeps that come check out the diaries you guys ROCK keep on keeping on ! -Happy Growing!

I still don't know if I should of Defoliated and switched to a 12/12 schedule at the same time. The Humidity was pretty high, and the leaves had water in between when there was lots of vegetation, this was one of the motives for the defoliation.

I have light from all sides, that's why I didn't do so much lollipopin.. but a lillte bit on the lowest internodes. 🔥🔥

14 days of flowering, the last 4 days I have a problem with lower temperature overnight and day .. cold weather, I have a house without heating, and I would say that it blooms more slowly.

Hello, we are crusing into week 3 I transplanted these ladies. Using just a little so like half the reccomed of Dynomyco inoculate. With a teaspoon of roots organic terp tea grow 👌 Give em a boost. Here soon ill be giving them a brew with the Microbrew and Terp tea grow. Then after that I'll follow with water for the next 4 days. Ph 6.5 irrated always! I deff don't like that these pots are on the ground in this little tent. I want to create something to get em off the ground to keep the roots warm! I know it's not a big deal but still. Happy roots equals happy plants

Tento týden jsem kytky trochu přehnojil, jinak roustou moc hezky, těším se na přepnutí

Plant has been getting straight pH balanced water this last week and minimal nutes. It is showing some slight nute burn so I let off a bit and raised the light canopy about 6”. I discovered that what I thought was a calcium or potassium deficiency was actually a rookie grower error by me. I have an RO system that I use to water all my strains in the grow room including this one, but when adding nutes to the water, it takes too long so I had been filling them up with well water. When I had originally tested the well water, I must had used a faulty testing agent as after testing it this last week, I was showing a pH of 7.5 vs. my RO of 6.2. Thus, every time I was adding nutes (multiple times a week) I was significantly fluctuating the pH between regular feedings and nutrient additions. To make matters worse, when I originally thought it was nute burn, I flushed each plant with well water and likely caused additional stress. Anyway, I have since learned that the well water needs to be treated, I only utilize RO water the last few days and plan to do so over this next week. Also, I have turned off the CO2 system as I was starting to see signs of heat stress on a couple of the strains (Plant #1). The literature I have reviewed suggested that these strains might be able to handle heat closer to 90F but it was also causing issues with high humidity so when I added a dehumidifier, it pushed the day temp to between 90-92F and the overnight temps were not getting low enough (maybe 85F or so). Maybe I could leave out the dehumidifier, but I was getting rH of 70% and didn’t want to risk any bud rot or mildew growth. So for now, I have turned off the CO2 and am getting high temps of 81F with 60% humidity and overnight temps of 74F and 50% humidity. Plant #1 had some heat related curling of leaves as well as some of the lower leaves showing impact of the pH fluctuations. My hope is we will be steady until harvest. Plant #2 has shown the least signs of stress and is fattening up its buds very nicely. Late in the week, some of the leaves started turning brown from the pH issue but my hope is that with RO water only, we will be on the right track. Over the next few weeks I will start monitoring the trichomes for a nice milky color for harvesting.

Week 6 Light cycle=18/6 Light Power=120w 50% Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 21c Radiator off= above 22c Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.4 DLI aim=35-40 EC aim=1.9 PH aim=6.2 Fri 26/1/24 #3 (Day 36) 📋 defoliate lower leaves that hardly get any light. Sat 27/1/24 #3 (Day 37) 📋 H=35cm D=45cm DLI=31.9 Raised light about 10cm Increased light power to 140w H=35cm D=56cm DLI=30.5 Sun 28/1/24 I have decided today is going to be the last day of veg before I flip to flower. Lights will have come on today at 6.00am and go off at 10.00pm, they will get 14hrs light today and tomorrow will be day 1 of 12/12. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=Veg nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra grow=4.0ml/L Roots=0.2ml/L Easy Ph down=0.125ml/L Ec= 2.05 PH=6.1/6.3 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=181ml/min Flow rate per plant=45ml/min. Total volume made=12L Total volume left=2L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=1L Ec=2.7 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #3 (Day 38) 📋 With no information for flower time I'm going to have to guess she will be finished in 45-60 days. I removed quite a few lower nodes that probably won't break through the canopy, they where ideal candidates for clones. Light cycle=12/12 Light Power=140w 58% Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 21.5c Radiator off= above 22.5c Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Mon 29/1/24 Lights on at 10.00am off at 22.00pm #3 (Day 39)(Day 1 flower) 📋 H=37cm D=54cm DLI=22.0 At 9.00pm increased light to 150w H=37cm D=54cm DLI=23.0 Tue 30/1/24 #3 (Day 40)(Day 2 flower) 📋 Wed 31/1/24 #3 (Day 41)(Day 3 flower) 📋 H=41cm D=50cm DLI=24.0 🚿 foliar sprayed (Sumo Boost 2ml/L). Thur 1/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0.ml/L Ec=0.2 PH=6.6/6.6 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=181ml/min Flow rate per plant=45ml/min. Total volume made=14L Total volume left=4L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=1L Ec=2.0 PH=6.1/6.2 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #3 (Day 42)(Day 4 flower)***** 📋 H=41cm D=50cm DLI=24.0 Lifted light and increasd power to 196w. H=41cm D=58cm DLI=26.5 Released the Lst to see if that will help. It's not been that bad a week for this one, she hasn't done overly well in the battle for space and hasn't quite managed to grow as tall as the other 3 plants by about 10cm. She has been in 12/12 for the majority of the week. Back soon. Take it easy.

A week more to go.

🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚

Began with equal parts of GH at a very diluted concentration. This week, I increased the concentration to the manufacturer's recommended dosage for seedlings (1/4 tsp per gallon).

8/10 Week 4 and they are doing so well Bea has recovered very well from topping and secondary branches rising nicely Hero will wait a day to be topped not unexpected Just not much going on and thats a good thing 8/12 Hero topped Moved the light up to 30" just looking for a veg sweet spot 8/13 Looking good so increased nuets to 10 and 10 of cocotek A&B Lots of growth tips rising from the leaf tucking we always do 8/14 Defoliation day not a lot removed but enough to open the tops to light. Flipping in 3... 8/15 Recovered from all defoliation and growth tips aplenty in the light Increased nuets to 12ml/gal each of cocotek AB, drinking more now Pic tonight Flipping in 2...

They are stretching a little bit but they should balance out. If they don’t turn out good I might just do clones but it has been a fun experiment

Hello:) The plants are progressing nicely. The wasabi is almost ready but the sangrias need at least one more week. Let‘s hope the wasabi won‘t be too much overripe by then:) Sadly the red/purple buds don‘t seem to spread more to the top buds, I suspect that the temperature difference between day and night is not enough, let‘s see if they get more color this week. I plan to harvest between the 18.11-22.11 if the sangrias are ready, the wasabi will have to hang in there:) Also, I‘ve started making the video, looks ok ,I have to get a more stable shot next time:)

Feliz con los resultados 😊

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** First ever ETS Grow, all thanks to @emeraldtriangleseeds/ @emerald_triangle_seeds I asked them for some sample seeds and they responded in kind, they let me pick out a few strains, this was one of the ones I picked. I also received from them their Leviathan CBG, Royal Purple Kush CBD and Morningstar. curious to see how their Leviathan CBG is vs Seedstockers CBG Zerodue. This black berry og CBD is my main pick from them. 3:1 reported cbd to thc ratio. plus a big fan of berries :D As of now I've scarified the seed, soaked in water for 20hr then moved to paper towel till a 1mm or less tap root was showing then planted in the medium. This grow has a lot of new things happening. its my first attempt at indoor growing using dry crystal fertilizers, the brand of nutrients I'm using is Lotus. It was also a gift from another user @SanderanderS as shipping to them would have been astronomical for the stuff they wanted. I have noticed some weird things like boated packaging, off gassing and weird consistency with the nutrient line up so far and been in contact with the reps online about it, They said everything is normal and not to worry. Another new thing with this grow is how it will be grown under the new LED's by Medic Grow. They will be under two of their MINI-SUN 2 240W LED grow lights using their V1 Spectrum, Its good from seed to harvest. You can find more information about this in the foot note. Just going to wait for another week till It pops up and will update as follows. Watered in with PH of 6.2 and a EC of 0.6 or 340ppm 500 scale. This is part of a 5 part diary in conjunction with medic grow led lights, in the beginning it was to be 6 plants but one of the selected strains died out and its replacement/backup seeds also failed. Sorry to say Humboldt Seeds Raspberry Diesel was a big flop all 3 seed did not meet my expectations, really wanted to try that one it looked nice. Can add that to the failed 4 seeds of Seedsman Cookies Chill :( ***Sponsored Grow*** Official Website: https://medicgrow.com/ + https://www.emeraldtriangleseeds.co.uk/ Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/OriginalETS/ Twitter: https://twitter.com/medicgrow + https://twitter.com/emeraldseeds Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/emeraldtriangleseeds/ YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/emeraldtriangleseeds https://growdiaries.com/seedbank/emerald-triangle-seeds