Likes
Comments
Share
Should probably start my 2 week flush at the end of this week but I want to harvest this plant and my other one(which is 2.5 weeks behind) at the same time so I'm probably going to try and push the feeding another 2 weeks until I start the final flush, trying to have this stay in flower for 10 weeks, the breeder says flowering period takes 8-10 weeks so I think I'll still be just fine. This week went well, the plants are slowly starting to fade and colors are starting to come out. Gonna follow through with my original plan and continue feeding lightly for the next week or two until I start the final flush. I also raised the lights a bit this week mainly to help and give more light to my second plant that stretched so much its main cola is hitting the grow light, and also to help prevent any foxtailing from occurring.
Likes
21
Share
SATIVA DREAM by KANNABIA This week she's doing WEEK #14 Overall Week#13 Veg This week no issues to report she's growing well she should be getting ready to start flowering here soon!! Stay Growing!! Kannabia.com SATIVA DREAM
Likes
40
Share
@GYOweed
Follow
Did a prune job. Got everyone to clone too. The hindsight is a beast and the SS are very bushy.
Likes
2
Share
@drozdzis
Follow
Plants look strong and healthy. Average temperature and humidity, no major fluctuations. Additives: A small dose of Voodoo Juice, 1/4 dose of Cal-Mag.
Likes
3
Share
@Thedibber
Follow
Bottom left is the badazz og cheese she's smelling dank and hopefully gives me some dank medicine
Likes
Comments
Share
Vamos familia, actualizamos la cuarta semana de floración de estas Sagrada amnesia de Seedstockers, salieron las 5 de 5, 100% ratio éxito. Aplicamos varios productos de Agrobeta, que son increíbles para aportar una buena alimentación a las plantas. Temperatura y humedad dentro de los rangos correctos dentro de la etapa de floración. La tierra utilizada es al mix top crop, por cambiar. De 5 ejemplares seleccioné los 3 mejores para completar el indoor y trasplanté directamente a macetas de 7 litros, el fotoperiodo a 12/12, también aplique una buena poda de bajos, se ven bien sanas las plantas, tienen un buen color y progresan a muy buen ritmo por el momento, ya progresan las flores, llevan ya una tricomada… increíble. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨
Likes
12
Share
@Chamed33
Follow
Second time flushing it.. I’m also running out of time before harvest I should’ve been flushing it a week earlier.. she’ll be ready in 2 days for chop
Likes
1
Share
@Bobaloo
Follow
I didn’t use these nutrients in last three weeks in flower and stopped watering completely the last week sorry for the old grow I found out about the site after
Likes
7
Share
@GYOweed
Follow
Finally getting copler nights but heat wave keeping temps high which is ok for getting most out of it. Did a last heavy feed. Then one last organic top Their structure and yield does suck. One is tk leaning. No clones survived. Not the best strain but smell and taste are boutique.
Likes
31
Share
@Sider79
Follow
First week flush with off gassed tap water at a ph of 6.5 to 6.9. I'm pushing them extra long and so far results are responsive and look very promising 🍾 . On the suvineer box the seeds came in was labeled with 7 to 8 weeks indoor an 9 to 11 weeks outdoors. Very happy with this from Victory Seeds ..... dripping with resin. 👌🤪👍
Likes
9
Share
@Haoss
Follow
This beautiful girl has started to grow actively, I'm going to give it a shot soon, she's feeling good🌱
Likes
21
Share
Hello Diary. The last week was over and we came to the end of the journey. Ten weeks in total, three weeks of vegetation and seven weeks of flowering, and a total of 77 days since Mimosa # 1 sprouted, while Mimosa # 2 sprouted a few days later but their harvest was the same day. Last week there were no surprises, I watered the plants regularly and observed the development of trichomes. Mimosa # 1 - beautiful structure of the stem, I had to connect the branches to the stem and the stick that I put later, so that the branches would not crack and the plant would be more beautiful for the last photo shoot. The flowers are smaller and more airy, they did not fill as I expected, but they are full of trichomes, sticky under the fingers and have a strong scent. I will see what the flowers will look like after drying. Mimosa # 2 - looks a lot better. Although she stretched a lot, the flowers filled much better than her sister Mimosa # 1. With the look of the flowers, I wouldn’t say it’s the same strain. I had to stabilize it with tying, the whole plant swayed heavily given the weight of the flowers at the top of the stalk. Both plants have been closer to light than Migro recommends in the last few weeks, but as far as I can see, nothing has hurt them. As I expect to harvest, this week I followed the development of trichomes on the flowers, most of them milky and when I noticed the appearance of browns, I prepared everything and had a harvest. So I harvested all three plants in the grow box the same day. The condition in the grow box is satisfactory, the temperature is around 29 degrees and the humidity is slightly lower than 50%, and one fan blows all the time, mixing the air in the box. I can't say yet exactly if I am satisfied, we will see after drying what we managed to achieve. As for the yield, I don’t believe it will be spectacular, especially with Mimosa # 1, but I won’t predict anything in advance. After I cut the plants at the bottom of the stalk, I hung them in a grow-box upside down to dry. Since I dry whole plants in one piece with the flowers, they will probably take longer to dry completely. The ventilation will stay on to make the airflow better. Here’s what the last week looked like. 19/07/2021 - Day 65. Watering. I adjusted the p.H to 6.3 and with 8 liters of water I watered all three plants evenly. Temp / Humidity on the farm - 30 degrees and 51% humidity. 21/07/2021 - Day 67. Watering. p.H 6.4. Same procedure as two days earlier. Temp / Humidity on the farm - 28 degrees and 41% humidity. 23/07/2021 - Day 69. Last watering. p.H I dropped to 6.4. Temp / Humidity on the farm - 29 degrees and 48% humidity. 25/07/2021 - Day 71. Photography and Harvest. After taking photos and video, I cut off the plant at the bottom of the stalk and hung it in a grow-box to dry in the dark. Whenever I write a report from the last week, some nostalgia overwhelms me after the harvest. I hang out with them every day, I take care of them, I send them positive energy and I hope they will reward me richly for it. We'll see what the reward will be here. See you soon with the final report.
Likes
Comments
Share
Started Flowering GPA Cookies and Money Maker. Left the Chocolate Skunk clone to get bigger before flipping to flower since I know the plant doesn’t stretch much during flower.
Likes
14
Share
FC-E 4800 lamp , to view this lamp or any other marshydro product go to: https://instagram.com/marshydro_aliexpress?igshid=YmMyMTA2M2Y=
Processing
Likes
8
Share
@Cana_Gen
Follow
Pretty happy this week. It’s starting to ripen up :) Getting close. Trichomes still not ready yet though.
Likes
5
Share
@Ensign420
Follow
Greetings fellow growers 🖖 and welcome to my first grow ever. This adventure actually started several months ago when I decided to stop buying flower from dispensaries and just grow my own bud. How hard can it be!? This is actually my second seed of this strain. The first bean sadly died due to over watering (sorry girl, RIP). I was literally watering the cube to the point where water was dripping from the bottom, then heavily sprayed the humidity dome and tray with the vents completely closed. Everyday. Multiple times. I never let the dome or try dry out. So after about 8 days of not sprouting, there was a funky smell of rot. So that was that. Later I learned that rockwool retains a lot of water and can easily drown seeds. So a wet/dry cycle is best for rockwool germination. So even after hours of researching and digging through forums and tutorial videos, I was still under prepared for this journey. Did not consider how delicate the germination phase is. Oh well. Lesson learned. Reset and try again! I hope everyone is safe and stoned during this corona crisis. Just like everyone else in the world, I want this pandemic to be over with. But in the meantime, let's grow some weed! 🖖 [START OF WEEK 01] Day 01 - Monday - 08/03/20 - Total Days: 001 ----------------------------------- - [0830]: Light Schedule: 24Hrs/0 --- Soaked cube in 5.5 PH water for 10 min. Did not shake water out. --- NO NUTES! Only PH'd down to control the PH levels. --- Did not use the default hole (way too deep). --- Flipped cube upside down and made a shallow hole for the seed (less than 0.25" deep). --- Placed seed in and pinched hole close. No additional water added. --- Sprayed the tray and dome with straight water (5.5 PH). --- Vents are cracked opened a for ventilation (about 1/4 opened each). --- Distance between the light and tray was 53" --- AC was set to 80 °F --- Exhaust fan was set to 86 °F --- Room average temp was at 85 °F --- Dome humidity was at 85-99% when sprayed. --- Allowing to completely dry before respraying. - [2200]: Dome and tray were completely dry! Sprayed only tray and dome with more water. Day 02 - Tuesday - 08/04/20 - Total Days: 002 ----------------------------------- - [0845]: Sprayed dome and tray in the morning. Everything was dry. --- Hoping for the best! - [2130]: Everything was dry again, so sprayed dome and tray at night along with a light spray on the cube. Day 03 - Wednesday - 08/05/20 - Total Days: 003 ----------------------------------- - [0830]: Everything was dry again. Resprayed dome and tray. Slightly sprayed cube. - [2125]: Hooo damn!! She popped! Am little stub is visible! Resprayed dome and tray again. --- Still going 24/0 for lights. - [+0033]: Just checked up on her and I swear she grew a bit taller! Getting excited! Day 04 - Thursday - 08/06/20 - Total Days: 004 ----------------------------------- - [0845]: Wow! Went from a little stub to fully sprouted overnight! Everything was pretty dry again so resprayed dome and tray. - [2200]: Tap root is visible! Over 1" long too! Just resprayed dome and tray again. -- Going to prep for hydroton transplant tomorrow! Day 05 - Friday - 08/07/20 - Total Days: 005 ----------------------------------- - [0930]: She keeps growing! -- Added a bit of CalMag to the spray bottle (8 drops to 650ml of distilled water). Resprayed dome and tray. Water was at a 5.4 PH with 141 PPM. - [1045]: Prepped the bubble bucket with 4.5gal of water. Water is high enough to reach about 0.25" above the bottom of the net pot. --- Added 3 drops of Superthrive --- Added 3.5ml of CaliMagic --- Added 2ml Hydroguard --- Then PH'd down to 5.6 --- Solution Strengh: 120 PPM --- Water chiller is set to 20 °C - [1100]: Transplant time! --- Filled the net basket 1/3 with hydroton. When placed in the bucket, air bubbles are not visible, but are slightly below the surface (slight digging will reveal the water/bubbles below). --- Removed plastic on rockwool cube and placed in basket, then filled around and covered with hydroton. Making sure to block any light from passing through the net pot and into the nutrient solution. --- Covered with a half-bottle dome sprayed with the CalMag water from earlier. --- Hoping for the best! - [1300]: Raised Bucket 5" higher. Now light distance is 48" to top of bucket. - [1820]: Lowered tent exhaust temp to 76 °F --- Lowered AC to 75 °F --- Raised bucket even higher so light distance is 30" to top of bucket. - [2300]: Looking good! --- Sprayed dome and surrounding hydroton with more CalMag water. --- Attached timer to light! So new 18 Hrs On/6 Hrs Off light schedule. --- Lights On: [1600] (4pm) --- Lights Off: [+1000] (10am the next day) --- Decided to go with lights on during the evening/night and off during the later mornings/afternoon (the hottest part of the day) to see if temps can be controlled better. --- Please survive girl! Day 06 - Saturday - 08/08/20 - Total Days: 006 ----------------------------------- - [0800]: Everything was dry. Resprayed hydroton and dome. - [2000]: Here first night cycle seemed to go well! Get'n taller! --- Dry again. Removed the dome. --- PH went up to 6.5 so PH'd down to 5.7 --- Ran the top feed drip ring for a bout a minute to wet the hydroton and rockwool with the nutient solution. ---Too scared to leave the top feed on 24hrs (I don't want over water her and cause dampening-off). Will let dry before re-watering. - [2100]: After closer inspection, I think she's looking a bit yellow. --- Decided to add a bit of grow nutes to the bubbler solution. --- Added 2ml of Sensi Grow A --- Added 2ml of Sensi Grow B --- Solution strength after adding more nutes: 176 PPM --- PH went up to 6 --- I hope that the extra chelating properties of the 'PH Perfect' solution is enough of a buffer for proper nutrient uptake. Day 07 - Sunday - 08/09/20 - Total Days: 007 ----------------------------------- - [0800]: Water dropped a bit (mostly due to evaporation) so solution strength was at 190. --- Checked PH again. Was still at 6, so PH'd down to 5.4 --- Ran the top feed for a minute to wet the hydroton a bit. - [0915]: Since she's looking perky but still a bit yellow. So decided to up the nutrient concentration even more before lights out. --- Added 2ml more of Sensi Grow A --- Added 2ml more of Sensi Grow B --- Solution strength after adding more nutes: 199 PPM --- PH went up to 5.8 - [1700]: Checked nutrients. --- PH: 5.9 --- Solution strength: 202 PPM --- Added 4ml of Voodoo Juice --- Added 4ml of B-52 --- PH after adding more nutes: 5.9 --- Solution strength after adding more nutes: 238 PPM - [2130]: Decided to make a new foliar spray to address the continued yellowing. --- Started with 500ml of distilled water. --- Added 3 drops of CaliMagic --- Added 3 drops of Sensi Grow A --- Added 3 drops of Sensi Grow B --- Added 3 drops of B-52 --- Added 1 drop of Superthrive --- Solution strength: 164 PPM --- PH was at 5.9 and did not adjust. --- Gave her one spray. --- Also sprayed the surrounding hydroton. [END OF WEEK 01]
Likes
35
Share
@valiotoro
Follow
A wonderful genetic thank you Fast Buds ❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin 🤤 I’m very happy with the harvest 103g !! For the light i’ve used the Spider Farmer SE-7000💡
Likes
5
Share
@Drtomb
Follow
Started the final week of nutrients. Then ill be switching to flawless finish and pure water the last week. Saskatoon Berry has been a very pleasant growing experience. Csnt wait for them to fatten up this final 20 days.
Likes
54
Share
@Roberts
Follow
Gorilla Cookies is starting to bulk. She is looking pretty good considering the navy mites from weeks ago. Leaves are deep green from neem oil. Buds should be free of any oil though. So it should not effect the taste when I get there. She has about a month left to grow roughly. She is under the Spider Farmer G3000 light. It is on 100 percent, and everything is running fairly well now. She is drinking a lot each day. Thank you Pure Instinto Seeds, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash (stackable)