Vote Now 🏆 for the Grow Awards 2025!
Likes
144
Share
@DevilsBud
Follow
New start of a week FLOWERING This grow i have seen it all from giants to dwarf that doesn't want to flower to a mutant call mohawk ethos you name it i gots it's lmao couple week ago trow out a male but still all that don't matter because what i have is great to me maybe not perfect but i ain't perfect either 20/4/22 The smell coming out of the tent is one tropical garden very happy so far with results and there hopefully bulking up Will be posting more photos Tru the week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
55
Share
01/12/22 irrigated 1 gallon water PH 5.85 TDS 403 gave 2 quarts recharge. 01/13/22 irrigated 1 gallon water PH 6.04 TDS 403. Topped 4 more spots. Growth has picked right back up after the PH mishaps. 01/14/22 re-potted to #5 nursery pot. Set up watering system. Now irrigating itself 1 time per day @ 50 gallons. Set PH 6.03 TDS 520. 01/15/22 adjusted TDS to 499 PH 6.0 Currently have 16 tops 01/16/22 PH 6.03 TDS 505 01/17/22 PH 5.93 TDS 520 01/18/22 PH 5.95 TDS 499 topped 4 more spots.
Likes
65
Share
Plante are recovering slowly I’m really happy with new nutrients plant are looking better I should have waited for total recover before flowering stage anyway nice buds are getting bigger
Likes
3
Share
Found a male in the garden, and removed him. Wish I had the set up to try breeding, I would love to put some of these boys to use. The other 4 phenos are expressing female.
Likes
27
Share
Day 58 FLOWER and this girls keep surprising me every day, they keep on getting bigger 🤷‍♂️🙌💚💚💚 the trichomes and smell department is doing the same 😂 they are definitely showing me the reason why i have to always make clones 🤦‍♂️🤦‍♂️🤦‍♂️ my bad 😆💚💚💚 As always thanks guys for checking and reading my diaries, I truly appreciate the love and it all 💚💚💚🙏🙏🙏 growers love and keep on groweing 💨💨💨💚💚💚 PPFD - 1000 Umol/m2 DLI - 40.0 mol/m2d VPD - 1.72 kPa Girls: Gelato OG @Seedsman Light Lumatek Zeus 465W compact pro at 100% More info and updates @ https://growdiaries.com/grower/dogdoctor https://instagram.com/dogdoctorofficial https://youtube.com/channel/UCR7ta4DKLFMg2xxTMr2cpIg All i grow is medecine for myself, nothing to sell, dont even ask !!!! Stay safe and do it with love for the love ❤️ 🙏 💚Growers Love to you all 💚
Likes
158
Share
Dog sitting earlier this week for good friend.. he’s got two pit mixes Dukie got a new bone to keep him occupied for a bit.. He’s loving it. Thanks for tuning in to the puppo show
Likes
19
Share
I was selected to test some of Fastbuds new genetics. Seeds germinated in 48hrs and 4 days later it broke ground and hasent slowed down. This grow is in my 4x4ft grow space located in an uninsulated shed. Each plant has a dedicated 150-200w LED from Viparspectra or Mars. Winter Temps in my area spike to -15C or more in Jan and Feb, so this will be an interesting and challenging grow. The grow room is 20-30C above ambient temperature, so there is a little manual and auto manipulation of grow Temps. See my video Lights 50-75%, 30 inches, 75-120w per plant Soil temp: 21-25C Light cycle: 5:1 Air temp: 18-27C
Likes
17
Share
I grew two plants and they couldn't have been and more different from each other. One plant grew quite well in my organic amended soil, the other suffered from pH issues and did not like any kind of stress. The plants leaves grew quite different some were webbed especially the ones on the larger flowers. The structure of the flowers on this plant are very chunky fox tail with absolutely gigantic caylex', almost had me thinking seeds. This plant also took almost 3 more weeks in flower than her sister. This plant also had a nice fade with some pink,red,violet,gold colors coming through. Both plant have similar smell with one being a little more pungent and gassy. Now for the normal plant, she grew like a rock star. Hey flowers are covered in sugar and are top shelf dense. She was too down about two weeks ago and is in jars and curing, let me say this though"when Barney's Farm says to use caution they mean it". This plant produced some very strong medicine so much so that I may have found a strain I would grow continually for a year or so. It's that good IMO. The plant did not give me a single bit of fuss 🤗, unlike her sister. Now I have the remaining plant hung up to dry and trim. Can't wait Cheers!!!
Likes
136
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/9/22 😻Week 4 is here and its been smooth sailing!!! They're still getting acclimated to their new homes, a little droopy but nothing major.. we've increased their feeding slightly and started adding trace amounts of calmag (<2mlgal) and we're now just watching them closely for any type of light stress..I really should have up-potted these sooner but spilled milk lol, I'm still on the fence on how we'regoing to train these, but we may just do our standard 4way LST after topping each at node #2 (after 4+ nodes).... we'll update again midweek, thanks as always for dropping by and happy harvests everyone!! ❤️🌱 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
283
Share
D4 - YES! We have lift-off!!! Today both seeds poked up. BOOM! Yesterday, I also put in my new humidifier in the tent, and man, this little thing is a BEAST. The amount of water vapor it is able to push out is insane. I use an Inkbird controller to... ummm... control the humidifier so that the humidity in the tent is 80% plus/minus 5%. I'm planning on running this high humidity for the first week or so and then dropping it down. D5 - I adjusted the light to 80 cm (about 31") above the canopy, resulting in 300 μmol/m2/s at canopy level. A bit high as I usually keep it around 250, but it should be alright, I think. D6 - The left girl, #1, seems to have died. Her leaves never fully emerged from the seed, and now she is entirely wilted, laying on the soil. So yeah, she is a gonner, I think. No idea what happened since she looked okay yesterday, and the other girl is already 5 cm (2") tall. Strange, but there's a first for everything, I guess. I already have a new seed soaking in water to be planted tomorrow. She'll then be six days after the other girl, and while probably noticeable at first, I don't expect any real problems during the grow. Hopefully, it'll germinate, but if not, c'est la vie. D7 - After soaking the seed for 24 hours, I rolled it in myco, and planted it in the first pot. However, I removed and replaced some soil in the center of the pot before planting, just in case something was wrong with the soil. Fingers crossed that this one will germinate just fine. On the other hand, the second girl is doing her thing just fine. I removed her humidity dome, though, as the RH in the tent should be high enough. D11 - End of the first week of veg and the third seedling popped up. BOOM! Now let's hope this girl survives, considering that the first girl in that pot died. On the other hand, the second girl is thriving; already 9 cm tall and 6 cm wide. Her first set of true leaves is slightly twisted but not too severely, and the second set looks fine. She is a bit leggy, so I added a couple of toothpicks for support. I have been asked in DM why I have Avocados on top of the soil. The reason is simply for feeding my worms and encouraging breeding. Happy worms = happy soil = happy plants. For anyone interested in learning more about Avocado Tek: https://youtu.be/JFRtNU6W9i8?t=400
Likes
283
Share
D4 - YES! We have lift-off!!! Today both seeds poked up. BOOM! Yesterday, I also put in my new humidifier in the tent, and man, this little thing is a BEAST. The amount of water vapor it is able to push out is insane. I use an Inkbird controller to... ummm... control the humidifier so that the humidity in the tent is 80% plus/minus 5%. I'm planning on running this high humidity for the first week or so and then dropping it down. D5 - I adjusted the light to 80 cm (about 31") above the canopy, resulting in 300 μmol/m2/s at canopy level. A bit high as I usually keep it around 250, but it should be alright, I think. D6 - The left girl, #1, seems to have died. Her leaves never fully emerged from the seed, and now she is entirely wilted, laying on the soil. So yeah, she is a gonner, I think. No idea what happened since she looked okay yesterday, and the other girl is already 5 cm (2") tall. Strange, but there's a first for everything, I guess. I already have a new seed soaking in water to be planted tomorrow. She'll then be six days after the other girl, and while probably noticeable at first, I don't expect any real problems during the grow. Hopefully, it'll germinate, but if not, c'est la vie. D7 - After soaking the seed for 24 hours, I rolled it in myco, and planted it in the first pot. However, I removed and replaced some soil in the center of the pot before planting, just in case something was wrong with the soil. Fingers crossed that this one will germinate just fine. On the other hand, the second girl is doing her thing just fine. I removed her humidity dome, though, as the RH in the tent should be high enough. D11 - End of the first week of veg and the third seedling popped up. BOOM! Now let's hope this girl survives, considering that the first girl in that pot died. On the other hand, the second girl is thriving; already 9 cm tall and 6 cm wide. Her first set of true leaves is slightly twisted but not too severely, and the second set looks fine. She is a bit leggy, so I added a couple of toothpicks for support. I have been asked in DM why I have Avocados on top of the soil. The reason is simply for feeding my worms and encouraging breeding. Happy worms = happy soil = happy plants. For anyone interested in learning more about Avocado Tek: https://youtu.be/JFRtNU6W9i8?t=400