Hello here we are now in flower! Start of the first week of flower and let me tell you we are ready!!!! I had so much fun training this plant! Ive decided im naming her patience cause shes definitely gave me a lot of patience learning, humbling me helping me thru some hard times I've had to go through. I'm blessed to grow and blessed to have the miss Guava Slushy - Green Bodhi Genetics. As far as the tent goes things have been dialed in! Recently got my humidity down to roughly 45, 50 % humidity. With a roughly temp 70s thru the day and 60s to high 50's in the Am. Im beyond proud of this plant! Lets go guava Slushy welcome to the Bloom! Getting ready to feed her bloom nutrients thru advanced nutrients connoisseur line! Ive been flushing her this last week with irrated water ph 6.30 shes looking well! Much love happy growing

Day 36 😋 - Defoliationed 20% (Start from below) 💪ROUGH FEED SCHEDULE💪 VEG Week 1 (day 1-6) : Just 6.5Ph balance H2O Week 2 (day 9) : ( 1ml Micro , 1ml Grow , 1ml Bloom , 2ml B-52 , 2ml Voodoo Juice) / 1 lite H2O Week 2 (day 14) : ( 2ml Micro , 1ml Grow , 1ml Bloom , 2ml B-52 , 2ml Voodoo Juice) / 1 lite H2O Week 3 (day 19) : ( 4ml Micro , 4ml Grow , 4ml Bloom , 2ml B-52 ) / 1 lite H2O Week 4 (day 23) : ( 4ml Micro , 4ml Grow , 4ml Bloom , 2ml B-52 ) / 1 lite H2O FLO Week 5 (day 32) : ( 4ml Micro , 4ml Grow , 4ml Bloom , 2ml Voodoo , 2ml Bud Candy , 2ml Sensizym)/ 1 lite H2O Week 5 (day 38) : ( 4ml Micro , 4ml Grow , 4ml Bloom , 2ml Voodoo , 2ml Bud Candy , 2ml Big bud , 2ml Sensizym)/ 1 lite H2O (👉one time per 5-7days👈) 😏EQUIPMENT USED😎 - QB288 v2 Powered by Samsung LM301B LED (240watt) 💪 - Mars Hydro grow tent (1mx1mx1.8m) - 6" Duch fan HF-150P - The Aroma diffuser I'm a beginer grower 👽 Please LIKE 👍 & FOLLOW ME 🙌

so she got a trim and cleaned up a bit i am allowing a bit too much grow because i will clone it, this week just plain water and a couple of sun baths to save on electricity

We have day 61 today, next update harvest 💪 --------------------- 👇 Week 8 (Pictures are from day 57+58 after 12/12, Trichomes pictures from day 60) - Just watering 1l / plant with calmag for the last 2 days. - PPFD at canopy height is approximately 750, with VPD around 1.3 - Harvest is around the corrner --------------------- Happy growing, and thank you for checking out my report! Your support means a lot to me! 🙏 --------------------- I appreciate every like and comment 👍👊😃

I'm still working out how much water to give, and I've probably under watered. The heat wave has driven the temps up, but these plants are still growing. Started flowering around day 23. Tied them down to try to get more light to the lower flower sites. Still haven't decided what to feed during flower, other than Big Bud. Any recommendations are welcome!

Hey Team! What can I say, my first time grow is coming along smooth. 🍃🍃 🍃 D-Boogie coming along smooth y’all. I think My tangerine dream is getting ready to flower soon. Going to carry out the veg-state as long as I can. I’m not sure how much water to give them but I’m sticking my gallon a week to keep it safe. Looking forward to next week!

Weeks 15 - It’s Ready - The 1st Gorilla Glue Is Ready To Be Havrest, I Gave It 3 Weeks Of Flushing And The Trichomes Of The Top Heads Are Most Cloudy With A Few Clear And A Little Amber Trichomes And The Bottom Buds Are Mostly Cloudy With A Few Clear And The Sceny Is Still At It’s Peak But You could Tell It Was About To Head Over The Morning And Start To Take A Downright Spiral I Will Be Hanging It To Dry For 7-9 Days At A Temperature Of 70 Degrees and 60% Humidity. The Slower It Dries The Better.

Day 31 - 38 (Day 32) I’m going to lower the humidity in the room to 55-60. Still no bananas but I’m still quite worried about #3 fully popping and ruining my whole crop. Since there is a good chance it’s going to herm, I’m going to give it with a small feeding today and watch it like a hawk this week. I think the boost actually made a decent difference in #5 from last week. I’m seeing slightly fatter main colas but that could just be from less topping/smaller plant or less nitrogen. I’ve decided to push my luck and give a boost to each plant. These things just aren’t filling out like they should. They look like they are on day 23 not 33. I’m going to top dress 3 tablespoons of 1-4-2 Destiny launch and later tonight I’m going to water in a low strength feeding of 0-0-15 kelp extract. I’m going to give a final heaping tablespoon of nature’s pride bloom to #5 so it can stretch to the end. I’m also going to lower the lights by a few inches. The tallest cola is now about 13 inches away and the rest of the canopy is at about 18–24. If I see signs of light stress I’ll raise it back up but I’m sure it could use the extra light on the lowers. (Day 33) I’ve been reading that bigger plants just take longer to mature and that’s probably why my plant hasn’t fully filled out or is about a week behind. I still could have done a better job defoliating some of the smaller larf branches on the bottom which just robs the good branches of energy. The more I think about it, the more I think I did a very poor job of defoliating the middle canopy. I’m still seeing lots of larf and small buds on the inside not getting much light. I’m still really worried about herms after finding that branch so I don’t want to stress them anymore. Removing suckers now is pointless. I missed my window of opportunity and now I have to deal with it. I’m going to slide an old DVD player underneath #6 to bring it up to canopy level. It’s lower buds are definitely not getting enough light. (Day 34) Ever since lowering the light, the canopy has gotten a few degrees warmer. I’ve noticed the buds don’t feel as sticky on top compared to the lower tucked branches that feel almost wet with resin. Outdoor weed grown in my climate will never reach the temperature where it degrades resin luckily. (Day 36) The buds are definitely swelling but not to the degree I want. Call me picky but I prefer my nugs as chunky as possible. I’m seeing lots of pistils but not much nug matter. Ive heard too many pistils can be caused by the overuse of alfalfa, kelp and seaweed extracts because of the natural PGR’s in them. I’m definitely going to reduce the amount of that stuff I use next round. I hope I’m just wrong and this tent is going to really fatten up this week but I have my doubts. (Day 37) A purple fade is starting on the underside of every plant except the bush who still is super dark green still. Last watering I got a nice amount of runoff so I’m just going to leave her until the end. I’m seeing a bit of yellowing on #5. I’m going to give it one final full strength feeding plus some rock dust and oyster shell tomorrow and that’s a wrap for nutrients. I might as well hit everything else with a final low strength 0-0-15 too. (Day 38) I’m amazed at how much this stuff smells compared to my last round. It smells very earthy and floral with a hint of pine. Definitely not that gassy smelling pine but more of a sweet pine.

Good morning growmies! I am finally back online after moving house and being without internet for weeks. These ladies took a battering and bruising in transit, and were left in the dark for 4 days, starved of water and food for 9 days TWICE inside 3 weeks. Still, can you believe the progress despite all that? Wowza, when RQS say these Epsilon F1s are fast they are NOT JOKING, and OH MY the smell is soooooooooooooooooo good. It's really a complex sweet and fruity scent with delicate notes of spice and sandalwood. I am super curious now. All five plants are within a couple of inches of each other, the tallest being 72cm currently (Dinah!). I am so very impressed with these plants that I am considering running a full tent of Epsilon F1s for my next grow! I wonder if I can get a bulk discount?! 😬😁 Day 54: Fertigated 10l Day 56: They are not slowing down. Ally, Normani, Lauren, and Dinah are all similar size, Camila is a bit smaller but in terms of development they are all very very close to each other. I am really impressed by the uniformity here, more impressed by the speed, and most impressed by the scent. They are not strong smelling, but if you get close or have a squeeze it wafts over you like an exquisite perfume. It is the most complex cannabis scent I have experienced yet. Really really interesting, I am really excited for the eventual smoke review so that I can properly understand the complexity at play here. The breeder and sponsor of this grow Royal Queen Seeds have offered to sponsor a full tent of this strain, if that works out then I will be doing another grow series right after this one. Fingers crossed!

Esta "primera" semana de periodo vegetativo, tenemos nuestro led LazerLite Pro 720w conectado 18h al mínimo de potencia. Sustrato Bio Terra Plus y un poco de perlita para retener humedad. Temperatura y humedad cruciales en esta fase. Regamos solo cuando sea estrictamente necesario.

Ganz schön Lila geworden dir Buds, aber das liegt wohl an der nächtlichen Tempe

I'm so excited to get these buds dried,trimmed, and cured! What a great harvest. Thanks fastbuds!

Pues HOY, miercoles 22 de abril, hago el cambio de fotoperiodo, a 14-14! De momento todo va según lo planeado, main lining hasta este punto, vigorosas y recias, se sienten muy sanas y beben muchisimo, de momento 3 litros por planta cada dos dias, veremos a ver ahora con la floracion. Ahora esta primera semana voy a hacerle diferentes aplicaciones buscando cosas jajajajaja hoy la voy a hacer aplicación foliar del delta y no recuerdo si tocaba tambien a riego. Luego, algo que tengo ganas de ver, es usar el calcio ahora entre esta semana y la siguiente de aplicación foliar, pero en esta ocasión no solo para fortalecer la planta, sino para activar la hormona Ca²+ creo que se llama, que en sí es el mensajero de la planta que le dice, eeehh, haz mas resina que estás tirando poca! Y así la fuerza.. habrá que ver jajaja pero bueno, hoy arrancan las 14 horas de luz y 14 horas de oscuridad 🔥🔥 Las plantas, el dosel lo tienen sobre los 40cm, espero no tener que hacer super cropping, no soy fan. Actualización jueves 23-04-2026: el video es del despertar tras sus primeras 14h de oscuridad. Aún no hay porqué ver nada respecto al cambio de fotoperiodo, lo interesante es lo vigorosas que están en el momento del cambio 🔥🔥🔥🔥💪🏾💪🏾💪🏾

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.

Another pruning of the main branches and removal of leaves. They are developing very well!!🍃🍃

Truly been a pleasure to grow this plant cannot wait to grow another papaya. Sherbet is one of the beefiest plants I’ve ever grown consistent thick buds all around on every branch and her fade is beautiful. They really knocked it out of the park this time.🔥🙏

Hey everyone 😀. On flowering day 59 both came into the darkroom and on flowering day 61 both were harvested :-). Both were very easy to trim 👍. Both of them already smell very tasty but more on the last update because this is only the short intermediate update :-). The trimmed buds were laid out on nets so that they can now dry at 62% humidity for 8-14 days before fermenting with 62% boveda packs in the jars :-). I wish you a lot with the interim update of the harvest and we'll see you at the end 👍😃. Stay healthy and let it grow 😀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Currently running a grow with a brand-new, unreleased strain from @supersativaseedclub. Here’s how the first two weeks have gone – really curious to see what’s next! Big thanks for letting me be part of this journey

buds are very visible and getting some mass (still really small though) and really satisfied with the number of bud sites. REALLY REALLY can't wait to harvest these ladies. P.S. the plant at the end of the last video is an autoflower we planted a few weeks ago.

The Blue Dream did very good , gave me thick dense buds full of crystals and smelling sweet and fruity