BSF Tres Gorillas

MxGrow Very good growth, I added 4ml of Kelper per liter of water to the irrigation and distributed it among the 4 plants. Once a day, I use a spray bottle with water to raise the humidity.

MxGrow So far everything is perfect, I had a problem with the CO2 generator but it seems that for now it's not that essential. 💧 Jan 1, 2022 - A tablespoon of Radig diluted in half a liter of water was applied and injected into the substrate. 💧 Jan 4, 2022 - Watering was done with 3ml of Kaly&Magy and 3ml of Gigagrow diluted in 1 liter of water, about 250 ml per plant.

MxGrow Very good start to the week, it seems everything is going perfectly with the plants. 🦍🍌 The Gorilla Banana has grown quite a bit in the last few days, just as the BSF strain description says, the first weeks have slow growth but very deep roots, and then it has a vegetative size explosion, and that's how they're developing. 🦍🌈 The Gorilla Rainbow has grown and thickened its stem quite a bit and now has its first 4 branches as you can see in the latest photos I took on January 11th. It's likely that by the end of this week I'll do the first apical cut, or maybe I'll wait until day 35 to get the clones and try to root them. 🦍👻 The Gorilla Ghost is still small but has good development every day. 🚿 Jan 8 - Ciao Fungi was applied at 2ml diluted in half a liter of water and sprayed when the lights went out. 💧 Jan 9 - Watered with 2ml of Rootzilla and 2ml of Kelper diluted in 1 liter of water, approximately 250ml per plant. 💧 Jan 12 - Watered with 1 liter of water, approximately 250ml per plant, (without nutrients) 🚿💧 Jan 13 - Foliar watered with 4ml of Gigagrow and 4ml of Kaly&Magy diluted in 2 liters of water, the rest to the substrate. 💊 pH = 6 - 6.5

MxGrow Starting the week perfectly, the plants are in good health, showing no deficiencies and have normal growth. ✂️ Jan 14, 22 - The first apical pruning was done on the Gorilla Rainbow and the 2 Bananas. ✂️ Jan 15, 22 - Large leaves were defoliated to allow for the growth of shoots on the Gorilla Rainbow. 💧 Jan 16, 22 - Watered with 2 liters of water at pH 6.1. (Half a liter per plant) 🌱🌴 Jan 19, 22 - LST technique was applied to the 4 plants: 🦍🌈: On the Rainbow, I'm trying to control vertical growth and aim to fill as much space as possible. 🦍🍌: I noticed that during these days they didn't grow much, so I applied LST to push them for a bit of growth, and within a couple of days, I noticed the difference. 🦍👻: On the Ghost, it wasn't necessary, but I wanted to experiment 😉 🚿💧 Jan 20, 22 - I gave them foliar feeding with 5ml of Gigagrow, 5ml of Kaly&Magy, and 5ml of Kelper diluted in 2.5 liters of water, pH 6.1.

MxGrow This is how the Gorillas are doing today, I'm happy that there are no nutrient problems, no pests, and they look very healthy. 🔄 I made a position change for the plants because the Bananas stopped growing, and the only difference was their position under the light, let's see how they develop in the new spot. ⛰️🚜 Jan 23, 22: I added more soil (Dirty Hippo - Rootz MX) to have a single level in the box. 💧🚿 I applied watering with 3 liters of water, 750 ml per plant, PH 6.1. 🦍🌈: It's the biggest by far, has some strong colors, and lives up to its name Rainbow. 🦍👻: The Ghost has already caught up in size with the Bananas, it's 8 days younger but is growing very strong and fast 💪🏼🚀 🦍🍌: You can really see the size difference compared to its sisters, but they're doing well, with patience they'll have good development. You'll notice in the photos the big difference 6 days after the position change.

MxGrow I see the plants are doing really well, they recovered perfectly from the defoliation and all are in good health. Every 2 or 3 days I check the LST ties and adjust them to make the most of the available space. 💧 Jan 3 - Watering was applied to the substrate with 14ml of Gigagrow, 10ml of Kaly&Magy, and 16ml of Kelper diluted in 4 liters of water, 1 liter per plant. 🚿 Jan 3 - Foliar watering was applied with 2ml of GigaGrow, 1ml of Kaly&Magy, and 0.5ml of Kelper diluted in 1/2 liter of water, applied when the lights go out. ✂️ Jan 3 - Topping was done on the 4 tips of the 2 Gorilla Banana. I will give them 10 days to recover from the topping before moving to flowering on day 59.

MxGrow This week was one of the hardest, the plants developed some kind of fungus and I confused it with nutrient deficiency, I made the mistake of applying too much fertilizer to the Rainbow and the Ghost. 💧☠️ Feb 09, 22 - 👻🌈 I applied too much fertilizer thinking there was a nutrient deficiency, causing the plants to lose almost 100% of their leaves.

MxGrow After seeing the result of the excess fertilizer, I did a root flush and moved the plants to another room near a window so they would only get natural light and waited for them to recover.

MxGrow The plants are doing well, they're slowly recovering from the fungus and the excess fertilizer. For a moment, I thought the Rainbow and Ghost would die, but they survived 💪🏽

MxGrow The plants are looking much better every day, the fungus disappeared with a product recommended by an Agronomist, if anyone has the same problem let me know and I'll tell you what product I used. I returned the Rainbow and the Ghost to the main room with the Mars Hydro because I had them near a window recovering. I hope everything continues to go well in the coming weeks.

MxGrow March has arrived and we are almost ready to switch the plants to flowering. I hope to be able to buy the Advance Nutrients products to help the plants unleash all the potential they have stored.

MxGrow Last week for the vegetative stage, the fertilizers from Advance Nutrients arrived 😎 Good things are coming!

MxGrow We're ready to start the flowering stage, I'll be using Advanced Nutrients products. Each of the plants looks very different in colors and sizes. The first watering was done with the nutrients in the photo, and the light schedule was changed to 12-12 on March 20, 22.

MxGrow We're doing well with the first week of Pre-flora. There were 3 waterings, 2 with nutrients and 1 with just water. 🦍🌈👻 - The Gorilla Rainbow and the Ghost have already shown the first pistils as you can see in the photos, they have a nice color and I've noticed changes in the first week. 🦍🍌🍌 - The Gorilla Banana haven't shown the pistils yet, but I have noticed changes in their growth, I hope in the coming days they show their pistils.

MxGrow In the comments of week 17, you can see what amounts of water and nutrients I'm using. The smell is getting stronger day by day.

MxGrow Happy with how my gorillas are doing, there are changes every day and each week I have to increase the watering. This week I used a total of 18 liters, about 4.5 liters for each plant. In the first 6 liters I use: ▪️︎4ml of Connoisseur A and B per liter of water. ▪️︎2ml of Rhino per liter of water. ▪️︎2ml of Bud Candy per liter of water. ▪️︎2ml of Carboload per liter of water. ▪️︎2ml of B-52 per liter of water. I wait 30 minutes and then apply another 6 liters with the following nutrients: ▪️︎4ml of Connoisseur A and B per liter of water. ▪️︎2ml of Nirvana per liter of water. ▪️︎2ml of Big Bud per liter of water. ▪️︎2ml of Overdrive per liter of water. ▪️︎2ml of Voodoo Juice per liter of water. I don't have an EC meter, so I try to make the measurements in ml exact with a syringe. ☆ 1 day a week I water the plants with 6 liters of water without nutrients and with a pH of 6.0. So far they haven't shown deficiencies, but I'm wondering if they have an excess of nitrogen due to the intense green color of the leaves.

MxGrow —

MxGrow I'm having a bit of a spider mite infestation on the Gorilla Ghost. I did a little leaf trimming where I found spiders or eggs. I was advised to apply soap and garlic, but I didn't want to risk getting a fungus due to the humidity. I'll try to control the infestation with pruning and killing the spiders one by one.

MxGrow The plants are doing very well, I keep finding leaves stained by spider mites but I decided not to apply any chemicals, I'll let the plants continue their process and I'll try to control the pest by just removing the leaves where I find spiders or eggs, the pest doesn't endanger the production. I continue applying Advance Nutrients twice a week with 3 liters of water per plant on Tuesdays and Fridays, on Sundays I water each plant with 1 liter of just water.

MxGrow The last 2 waterings were just with water at pH 6.0. 🦍🍌 - The Gorilla Banana are still experiencing nutrient burn, with a deep green color in the leaves, and it's been days since I've seen any changes in the flowers. 🦍🌈👻 - The Gorilla Rainbow and Gorilla Ghost are losing leaves every day 🍃 due to a lack of nutrients. For the last 2 weeks, I've only been watering with water to try to achieve the maximum flavor and aroma from the natural plant.

MxGrow Everything is excellent for being my first harvest, I'm very happy, the aromas are delicious and all the buds feel full of trichomes, I decided to leave this plant whole for drying. Gorilla Banana 2 🦍🍌🍌 - June 1, 22 starts the curing process

MxGrow Very happy with the harvest I had from the Gorilla Ghost 🦍👻 the smell is very pleasant and the buds feel very full of resin, the whole drying room is filled with aromas

MxGrow Last week for the Gorilla Rainbow and Gorilla Banana 2, the Flawless Finish from Advance Nutrients took a while to arrive but I already applied 2ml per liter of water to both plants. I cut the Gorilla Ghost and Gorilla Banana 1 to participate in the BSF Mastee Indoor giveaway, they might have needed another week but I checked the trichomes and they were already about 40% ready. The Gorilla Rainbow developed spectacularly, without a doubt the best of the 4 from the BSF Gorilla Family.

MxGrow Without a doubt, the Gorilla Rainbow was the best of all, even after over-fertilizing it, it produced the most yield, grew very big, it's worth it 100%!

MxGrow —

MxGrow —

MxGrow —